BRADLEY INSTITUTIONAL AND COMMERCIAL TOILETACCESSORIES

This Bradley guide specification is useful in specifying toiletand bath accessories for institutional?projects, including K-12 and university facilities, municipalfacilities, and other projects demanding high durability, maintenance-friendlyaccessories.? It includes an array ofaccessories to complete your project specification.? This section is editable using common specificationsoftware editing tools, including selection of IP and SI units.

Additional toilet and bath accessories are listed in Bradley'sSection 10 28 16 BATH ACCESSORIES which may be copied into this section asneeded to meet project or firm master section requirements.

Bradley is a trusted leader in the commercial washroom equipmentmarket, offering high quality accessories at a competitive price, fastdelivery, and excellent customer service.?Bradley offers a full line of washroom accessories for everyapplication. From high-end office buildings to high-security prisons, Bradley hasa product to meet any washroom accessory need.

Custom products are another Bradley specialty, from unusualconfigurations of grab bars, to modified sizes, Bradley will work with you toprovide the products necessary to complete your project.? Bradley Corporation serves a diverse customerbase ranging from local business facilities to international corporations likeWal-Mart, General Motors, U.S. Postal Service, and AMC Theaters Corporation.

Architects, engineers, and specifierslook to Bradley Corporation for innovation in design and leadership in thedevelopment of environmentally conscious products.? Bradley Corporation, a member of the U.S.Green Building Council, the Wisconsin Green Building Alliance, has severalproducts earning certification by Greenguard Environmental Institute, andGreenguard Children and Schools program.

Bradley eases the specifying process with a seasoned customerservice staff and a range of helpful information tools on an advanced website.? Bradley's Universal Design Guide ? Washrooms& Showers is available on the Bradley website as a helpful resource whenplanning commercial toilet room layout.

Bradley premiumquality commercial products appear in the following CSI MasterFormat 2010?Sections:

Section 10 21 13? TOILET COMPARTMENTS (Mills? Metal, Plastic-laminate, Phenolic, andPlastic units)

Section 10 28 13.13 ? COMMERCIAL TOILET ACCESSORIES(Institutional and commercial accessories)

Section 10 28 13.19? HEALTHCARE TOILET ACCESSORIES (Patient care accessories)

Section 10 28 13.21? WARM AIR DRYERS (Aerix? hand dryers)

Section 10 28 13.63? DETENTION TOILET ACCESSORIES

Section 10 28 16? BATH ACCESSORIES (Hospitality and commercial bath accessories)

Section 10 51 26? PLASTIC LOCKERS (Lenox? Plastic Lockers)

Section 22 11 19? DOMESTIC WATER PIPING SPECIALTIES (Thermostatic mixing valves)

Section 22 42 16.01? COMMERCIAL LAVATORIES AND FAUCETS (Express? and Frequency?Single and multi-station lavatories)

Section 22 42 16.02? COMMERCIAL LAVATORIES AND FAUCETS (Advocate? lavatories)

Section 22 42 16.03? COMMERCIAL LAVATORIES AND FAUCETS (Verge? lavatories)

Section 22 42 16.04? COMMERCIAL LAVATORIES AND FAUCETS (Lav Decks? lavatories)

Section 22 42 16.11? COMMERCIAL SINKS AND FAUCETS

Section 22 42 23? COMMERCIAL SHOWERS AND SHOWER VALVES

Section 22 42 33? WASHFOUNTAINS (Sentry?, BradMate?, and Classic washfountains)

Section 22 43 00? HEALTHCARE PLUMBING FIXTURES (Patient care lavatory units)

Section 22 45 00? EMERGENCY PLUMBING FIXTURES (Halo? Emergency eyewash fixtures and showers)

Section 22 46 00? SECURITY PLUMBING FIXTURES

ContactBradley Corporation, Menomonee Falls, WI 53051, Phone: 800-BRADLEY(800)272-3539,
Fax:? (262)251-5817, or visit the Bradleyweb site www.bradleycorp.com.

Bradley Corporationis an AIA/CES registered provider currently offering five programs earning one(1) HS&W Learning Unit each; several qualify for sustainable design (SD)credit.? All active AIA members mustsuccessfully complete 18 learning unit (LU) hours each year.

GREENGUARDCertification ProgramSM is a service mark of GREENGUARDEnvironmental Institute.

Mills?,Aerix?, Lenox?, Express?, Frequency?,and Advocate? are registered trademarks of Bradley Corporation.

Verge?, Lav Decks?,Sentry?, BradMate?, and Halo? are trademarks of Bradley Corporation.


SECTION 10 28 13.13
COMMERCIAL TOILET ACCESSORIES

PART 1 - GENERAL

1.1                   SUMMARY

A.             Section Includes

1.             Public-use washroom accessories.

2.             Public-use shower room accessories.

3.             Childcare accessories.

4.             Custodial accessories.

1.2                   RELATED SECTIONS

Specifier:? If retainingthis optional article, delete any references below that do not apply to thisproject.

1.             Division 08 Section "Mirrors" for monolithicglass mirrors.

2.             Division 10 Section "Healthcare ToiletAccessories" for toilet accessories specific to healthcare facilitypatient care areas.

3.             Division 10 Section "Warm Air Dryers"for hand dryers.

4.             Division 10 Section "Detention ToiletAccessories" for toilet accessories specific to detention facility secureareas.

1.3                   REFERENCES

Specifier:? If retainingthis optional article, edit to reflect standards cited in the completedsection.

A.             American National Standards Institute (ANSI):

1.             ANSI A 117.1 - Accessible and Usable Buildingsand Facilities.

B.             ASTM International (ASTM):

1.             ASTM A 653/A 653M - StandardSpecification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-IronAlloy-Coated (Galvannealed) by the Hot-Dip Process.

2.             ASTM A 666 - Standard Specification for Annealedor Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar.

3.             ASTM A 1008/A 1008M- StandardSpecification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-StrengthLow-Alloy, High-Strength Low-Alloy with Improved Formability, SolutionHardened, and Bake Hardenable.

4.             ASTM B 456 - Standard Specificationfor Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and NickelPlus Chromium.

5.             ASTM C 1503 - Standard Specificationfor Silvered Flat Glass Mirror.

6.             ASTM F 446 - Standard Consumer SafetySpecification for Grab Bars and Accessories Installed in the Bathing Area.

C.             US Federal Government:

1.             U.S. Architectural & Transportation BarriersCompliance Board. Americans with Disability Act (ADA) and ArchitecturalBarriers Act (ABA) Accessibility Guidelines for Buildings and Facilities.

1.4                   ACTION SUBMITTALS

A.             Product Data:?For each product:

1.             Manufacturer's product data sheets indicatingoperating characteristics, materials and finishes.? Mark each sheet with product designation.

2.             Mounting requirements and rough-in dimensions.

B.             LEED Submittals:

1.             Product data for Credit MR 4:? Indicate percentages by weight ofpostconsumer and preconsumer recycled content, and product cost.

1.5                   INFORMATION SUBMITTALS

A.             Sample warranty.

B.             Operation, care and cleaning instructions.

1.6                   MAINTENANCE SUBMITTALS

A.             Furnish indicated spare parts that are packagedwith identifying labels listing associated products.

B.             Operation and Maintenance data.

1.7                   QUALITY ASSURANCE

A.             Source Limitations:? For products listed together in the samePart 2 articles, obtain products from single source from singlemanufacturer.

B.             Manufacturer Qualifications:? Approved manufacturer listed in this section,with minimum [5]years experience in the manufacture of product types. Manufacturers seekingapproval must submit the following:

1.             Product data, including test data from qualifiedindependent testing agency indicating compliance with requirements.

2.             Samples of each component of product specified.

3.             List of successful installations of similarproducts available for evaluation by Architect.

4.             Submit substitution request not less than 15days prior to bid date.

Specifier: Bradley product information includes detailedinformation regarding requirements of ADA, ICC A117.1, and Texas AccessibilityStandards.

C.             Accessibility Requirements: Comply withrequirements of ADA/ABA and with requirements of authorities havingjurisdiction.

1.8                   WARRANTY

A.             Special Mirror Warranty:? Manufacturer's standard form in whichmanufacturer agrees to replace mirrors that develop visible silver spoilage ?or frame corrosion defects within specifiedwarranty period.

1.             Warranty Period:?[15]years from date of Substantial Completion.

PART 2 - PRODUCTS

2.1                   MANUFACTURERS

A.             Basis-of-Design Products:? Subject to compliance with requirements,provide commercial toilet accessories manufactured by Bradley Corporation,Menomonee Falls, WI 53051, (800) 272‑3539, fax: (262) 251‑5817;Email info@BradleyCorp.com;? Website: www.bradleycorp.com.

Specifier:? Retain one ofthree paragraphs below based upon Project requirements.

1.    Submitcomparable products of one of the following for approval by Architect:

a.             [Specifier:? Insert name of manufacturer ofcomparable product.]

2.             Submit requests for substitution in accordancewith Instructions to Bidders and Division 01 General Requirements.

3.             Provide specified product; Owner will notconsider substitution requests.

2.2                   MATERIALS

A.             Stainless Steel:?ASTM A 666 Type 304 (18-8); satin finish exposed surfaces unlessotherwise indicated.

B.             Steel Sheet:?ASTM A 1008/A 1008M, Designation CS, manufacturer?sstandard thickness.

C.             Galvanized-Steel Sheet:? ASTM A 653/A 653M, with G60hot-dip zinc coating, manufacturer?s standard thickness.

D.             Galvanized-Steel Mounting Devices:? ASTM A 153/A 153M, hot-dipgalvanized after fabrication.

E.             Fasteners:

1.             Exposed:?Screws, bolts, and other devices of same material as accessory unit andtamper-and-theft resistant.

2.             Concealed:?Galvanized steel.

F.             Chrome Plating:?ASTM B 456, Service Condition Number SC 2, moderateservice.

G.             Mirrors:?ASTM C 1503, Mirror Glazing Quality, clear-glass mirrors,nominal 6.0 mm thick.

H.             ABS Plastic:?Acrylonitrile-butadiene-styrene resin formulation.

2.3                   PUBLIC-USE WASHROOM ACCESSORIES

Bradley Surface MountedToilet Tissue Dispensers:

5A10???????? DiplomatSeries, housed single roll, non-controlled delivery, surface mount housing;satin finish stainless steel.? Faceformed with contemporary contours, radii, and finish matching relatedaccessories in manufacturer's designer series.

505?????????? Bracket-type,exposed single roll, controlled delivery, surface mount; chrome plated die castzinc.

???????????????? 522??????? Same as 505, but dual roll version.

5053????????? Bracket-type,exposed single roll, controlled delivery, surface mount; epoxy coated bentaluminum.

5054????????? Bracket-type,exposed single roll, controlled delivery, surface mount; chrome plated steel.

???????????????? 5224?????? Same as 5054, but dual roll version.

5061????????? Bracket-type,exposed single roll, controlled delivery, surface mount; bright polishedstainless steel.?

5071????????? Bracket-type,exposed single roll, controlled delivery, surface mount; die cast aluminum.

???????????????? 5241?????? Same as 5071, but dual roll version.

508?????????? Concealedmounting, exposed single roll, non-controlled delivery, surface mount; chromeplated cast brass escutcheons and posts.

508-32?????? Concealedmounting, exposed single roll, non-controlled delivery, surface mount; chromeplated die cast Zamac alloy escutcheons and posts.

???????????????? 523??????? Same as 508-32, but dual roll version.

5084????????? Concealedmounting, exposed single roll, non-controlled delivery, surface mount; satinfinish stainless steel.

???????????????? 5234?????? Same as 5084, but dual roll version.

5085????????? Concealedmounting, exposed single roll, non-controlled delivery, surface mount; brightpolished finish stainless steel.

???????????????? 5235?????? Same as 5084, but dual roll version.

5106????????? Housedexposed single roll with hinged hood, non-controlled delivery, surface mount;bright polished stainless steel.

???????????????? 5126?????? Same as 5106, but dual roll version

515?????????? Housed sheettissue dispenser, surface mount, 700 double-fold or 1250 single-fold tissuecapacity, with vandal resistant hinged locking cover; satin finish stainlesssteel.?

5262????????? Singleroll, surface mount with shelf over, non-controlled delivery; satin finishstainless steel.

???????????????? 5263?????? Same as 5262, but dual roll version.

5402????????? Housed singleroll with roll-in-reserve, surface mount, non-controlled delivery, vandalresistant hinged locking cover; satin finish stainless steel.

Additional accessorieslisted in Bradley Section 102816 BATH ACCESSORIES.

A.             Toilet Tissue Roll Dispenser, Surface Mount TTDS:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

3.             Delivery:?[Controlled.] [Non-controlled.] [Non-controlledat accessible water closets.]

4.             Spindle:? [User-removable] [Vandalresistant, key removable].

Specifier:? If required,retain descriptive characteristics below and edit to match specified model.

5.             Design: [Manufacturer's standard] [Manufacturer's designer series].

6.             Configuration:?Surface-mounted, [bracket-type exposed] [concealed mounting exposed] [concealedmounting exposed with hinged hood] [fully housed with lock] [, with shelf].

7.             Capacity:?[Singleroll][Doubleroll][Singleroll with roll-in-reserve] [Sheet tissue] dispenser.

8.             Finish and Base Material:? [Chrome-plated die cast zinc] [Die-castZamac alloy][Epoxy-coatedbent aluminum][Castaluminum][Chrome-platedsteel][Bright-polishedstainless steel][Satin-finishstainless steel]with polymer spindles.

Bradley Recessed MountedToilet Tissue Dispensers:

5A00???????? DiplomatSeries recessed mount housed single roll with roll-in-reserve, non-controlleddelivery on non-removable molded polyethylene spindles.? Satin finish stainless steel.? Face formed with contemporary contours,radii, and finish matching related accessories in manufacturer's designerseries.

510?????????? Exposed singleroll, recessed mount, non-controlled delivery; chrome plated cast brass.

5102????????? Exposedsingle roll, recessed mount, non-controlled delivery; bright finish stainlesssteel.

5103????????? Exposed singleroll, recessed mount, hinged hood over roll, non-controlled delivery; brightpolished stainless steel.?

???????????????? 5123?????? Same as 5103, but dual roll version.

5104????????? Exposedsingle roll, recessed mount, non-controlled delivery; satin finish stainlesssteel.

5105????????? Exposed singleroll plus roll-in-reserve, recessed mount, non-controlled delivery; polishedstainless steel.

5124????????? Exposed dualroll side by side, recessed mount, non-controlled delivery; satin finishstainless steel.

5125????????? Exposeddual roll side by side, recessed mount, non-controlled delivery; brightpolished stainless steel.

5127????????? Exposed dualroll stacked vertically, recessed mount, hinged hood over rolls, non-controlleddelivery; bright polished stainless steel.

5412????????? Housedsingle roll with roll-in-reserve, surface mount, non-controlled delivery,vandal resistant hinged locking cover; satin finish stainless steel.

B.             Toilet Tissue Roll Dispenser, Recessed Mount TTDR:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

3.             Delivery:?[Controlled.] [Non-controlled.] [Non-controlledat accessible water closets.]

4.             Spindle:? [User-removable] [Vandalresistant, key removable].

Specifier:? If required,retain descriptive characteristics below and edit to match specified model.

5.             Design: [Manufacturer's standard] [Manufacturer's designer series].

6.             Configuration:?Recessed-mounted [with hinged hood].

7.             Capacity:?[Singleroll][Doubleroll, horizontal][Doubleroll, vertical][Singleroll with roll-in-reserve] [Sheet tissue] dispenser.

8.             Finish and Base Material:? [Chrome-plated die cast zinc] [Die-castZamac alloy][Epoxy-coatedbent aluminum][Castaluminum][Chrome-platedsteel][Bright-polishedstainless steel][Satin-finishstainless steel]with polymer spindles.

Bradley Shared Partition-MountedToilet Tissue Dispensers:

5422????????? Partitionmounted, serves two compartments:? Singleroll plus spare roll for each compartment, non-controlled delivery, recessedmount, enclosed roll, satin finish stainless steel.? Vandal resistant hinged locking cover in eachcompartment.

C.             Shared, Partition Mounted Toilet TissueDispensers TTDP:

1.             Basis of Design:?Bradley Corp., Model 5422.

2.             Application:?[Ateach paired water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Capacity:?Single roll with roll-in-reserve.

4.             Material:?Stainless steel with polymer spindles.

5.             Finish:?Satin finish stainless steel.

6.             Roll Access:?Enclosed.

7.             Delivery:?Non-controlled.

8.             Mounting: Through-partition.

9.             Service Access:?Vandal resistant lock.

Bradley Jumbo Roll ToiletTissue Dispensers:

5424????????? Singleroll, up to 10 inch diameter, surface mounted, satin finish stainlesssteel.? Vandal resistant hinged lockingcover.

5425????????? Dual roll,9 inch diameter, surface mounted, satin finish stainless steel.? Vandal resistant hinged locking cover.

D.             Toilet Tissue Jumbo Roll Dispenser, SurfaceMount TTJ:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Mounting:?Surface mounted.

4.             Core Adapters:?As required to accommodate 10 inch (254 mm) tissue roll with 1-1/2 inch (38 mm), 2-1/8inch (54 mm), and 3 inch (76 mm) core.

Bradley Combination ToiletTissue Dispensers:

5912????????? Recessedmounted, dual roll, non-controlled delivery, exposed roll, seat coverdispenser, and 1.0 gallon plastic waste receptacle with stainless steel pushflap door, satin finish stainless steel.?Vandal resistant hinged locking covers.?This unit can coordinate with grab bars.

5912-10???? Semi-recessedmounted, dual roll, non-controlled delivery, exposed roll, seat coverdispenser, and 1.0 gallon plastic waste receptacle with stainless steel pushflap door, satin finish stainless steel.?Vandal resistant hinged locking cover.?Projects 1-1/4 inch, cannot coordinate with grab bars.

5912-11???? Surfacemounted, dual roll, non-controlled delivery, exposed roll, seat coverdispenser, and 1.0 gallon plastic waste receptacle with stainless steel pushflap door, satin finish stainless steel.?Vandal resistant hinged locking covers.?This unit cannot coordinate with grab bars.

5912-69???? Surfacemounted, dual roll, non-controlled delivery, exposed roll, seat coverdispenser, and 1.0 gallon plastic waste receptacle with stainless steel pushflap door, reverse-hinged door, satin finish stainless steel.? Vandal resistant hinged locking cover.? Reverse hand door. This unit projects 1-1/4inch, and with single door, it cannot coordinate with grab bars.

5922????????? Recessmounted, dual roll, non-controlled delivery, exposed roll, seat coverdispenser, satin finish, stainless steel.?Vandal resistant hinged locking cover in one compartment.? This unit can coordinate with grab bars onone side.

5922-10???? Semi Recessmounted, dual roll, non-controlled delivery, seat cover dispenser, satinfinish, stainless steel.? Vandalresistant hinged locking cover in one compartment.? This unit cannot coordinate with grab bars.

5922-11???? Surfacemounted, dual roll, non-controlled delivery, exposed roll, seat coverdispenser, satin finish, stainless steel.?Vandal resistant hinged locking cover in one compartment.? This unit cannot coordinate with grab bars.

5922-69???? Recessmounted, dual roll, non-controlled delivery, exposed roll, seat coverdispenser, satin finish, stainless steel.?Vandal resistant hinged locking cover in one compartment.? Reverse hand door. This unit projects 1-1/4inch, and with single door, it cannot coordinate with grab bars.

5932????????? Recessmounted, with seat cover dispenser and 1.7 gallon plastic waste receptacle withstainless steel push flap door, recessed mount on one side, satin finishstainless steel.? Vandal resistant hingedlocking cover in one compartment.? Thisunit can coordinate with grab bars on one side.

5932-10???? Semi-Recessmounted, with seat cover dispenser and 1.7 gallon plastic waste receptacle withstainless steel push flap door, satin finish stainless steel.? Vandal resistant hinged locking cover in onecompartment.? This unit cannot coordinatewith grab bars.

5932-11???? Surfacemounted, with seat cover dispenser and 1.7 gallon plastic waste receptacle withstainless steel push flap door, satin finish, stainless steel.? Vandal resistant hinged locking cover in onecompartment.? This unit cannot coordinatewith grab bars.

5942????????? Recessmounted, with dual roll, exposed roll, non-controlled delivery, and 1.0 gallonplastic waste receptacle with stainless steel push flap door for one compartment,satin finish stainless steel.? Vandalresistant hinged locking cover in one compartment.? This unit can coordinate with grab bars onone side.

5942-10???? Semi-Recessmounted, sual roll, exposed roll,?non-controlled delivery, and 1.0 gallon plastic waste receptacle withstainless steel push flap door for one compartment, satin finish stainlesssteel.? Vandal resistant hinged lockingcover in one compartment.? This unit cannotcoordinate with grab bars.

5942-11???? Surfacemounted, dual roll, exposed roll,?non-controlled delivery, and 1.0 gallon plastic waste receptacle withstainless steel push flap door for one compartment, satin finish stainlesssteel.? Vandal resistant hinged lockingcover in one compartment.? This unitcannot coordinate with grab bars.

E.             Combination Toilet Tissue Dispensers CTTD:?Units with toilet tissue dispenser, seat cover dispenser[,and waste receptacle].

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

3.             Mounting: [Flush, one side] [Recessed, one side.] [Semi-recessed,one side][Surface,one side.]

4.             Grab Bar Coordination:? [Not required] [Required].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

5.             Finish and Base Material:? Satin finish stainless steel, with polymerspindles.

6.             Waste Receptacle:? Plastic, 1.7 gallon (6.5 liters), with stainless steel push flap door.

7.             Seat Cover Dispenser.

8.             Capacity:?Dual roll.

9.             Roll Access:?Exposed.

10.         Delivery:?Non-controlled.

11.         Service Access:?Vandal resistant lock, single door.

Bradley Shared PartitionMounted Combination Toilet Tissue Dispensers:

591?????????? Partitionmounted, serves two compartments.? Dualroll for each compartment, non-controlled delivery, exposed roll, with seatcover dispenser and 0.88 gallon plastic waste receptacle with stainless steelpush flap door, vandal resistant hinged locking cover in each compartment, recessedmount; satin finish stainless steel.

5911????????? Partitionmounted, serves two compartments.? Dualroll for each compartment, non-controlled delivery, exposed tissue rolls onleft, with seat cover dispenser, and 0.88 gallon plastic waste receptacle withstainless steel push flap door, vandal resistant hinged locking cover in eachcompartment, flush installation on one side, recessed mount; satin finishstainless steel.

5911-69???? Partitionmounted, serves two compartments.? Dualroll for each compartment, non-controlled delivery, exposed tissue rolls onright, seat cover dispenser, and 0.88 gallon plastic waste receptacle withstainless steel push flap door, flush installation on one side, recessed mount.? ?Vandalresistant hinged locking cover in one compartment with flush mount on oppositeside to coordinate with grab bar; satin finish stainless steel.

5941????????? Partitionmounted, serves two compartments.? Dualroll for each compartment, non-controlled delivery, exposed roll, and 0.88gallon plastic waste receptacle with stainless steel push flap door for eachcompartment, flush mount on one side, satin finish stainless steel.? Vandal resistant hinged locking cover in onecompartment.? Coordinates with grab barson one side.

592?????????? Partitionmounted, serves two compartments.? Dualroll for each compartment, non-controlled delivery, exposed roll, seat coverdispenser for each compartment, recessed mount, satin finish stainlesssteel.? Vandal resistant hinged lockingcover in one compartment.

5921????????? Partitionmounted, serves two compartments.? Dualroll for each compartment, non-controlled delivery, exposed tissue rolls onleft, seat cover dispenser for each compartment, flush mount on one side, satinfinish stainless steel.? Vandal resistanthinged locking cover in one compartment.?Coordinates with grab bars on one side.

5921-69???? Partitionmounted, serves two compartments.? Dualroll for each compartment, non-controlled delivery, exposed tissue rolls onright, seat cover dispenser for each compartment, flush mount on one side,satin finish, satin finish stainless steel.?Vandal resistant hinged locking cover in one compartment.? Coordinates with grab bars on one side.

594?????????? Partitionmounted, serves two compartments.? Dualroll, non-controlled delivery,? exposedroll, and 1.0 gallon plastic waste receptacle with stainless steel push flap doorfor each compartment, flush mount on one side, satin finish stainlesssteel.? Vandal resistant hinged lockingcover in one compartment.? This unit cancoordinate with grab bars on one side.

F.             Shared Partition Mounted Combination ToiletTissue Dispensers CTTD:? Dual-compartment units with toilet tissuedispenser, seat cover dispenser[, and waste receptacle].

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach paired water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

3.             Mounting: [Flush, one side] [Recessed, one side.] [Semi-recessed,one side][Surface,one side.]

4.             Grab Bar Coordination:? [Not required] [One-side] [Two-sides].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

5.             Finish and Base Material:? Satin finish stainless steel, with polymerspindles.

6.             Waste Receptacle:? Plastic, [0.88 gallon (3.3 liters)] [1 gallon (3.8 liters)] [1.7 gallon (6.5 liters)], with stainless steel push flap door.

7.             Seat Cover Dispenser.

8.             Capacity:?Dual roll for [one] [each] compartment.

9.             Roll Access:?Exposed.

10.         Delivery:?Non-controlled.

11.         Service Access:?Vandal resistant lock, [single] [double] door.

G.             Toilet Tissue (Folded) Dispenser TTF:

1.             Basis of Design:?Bradley Corp., Model 515.

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Finish and Base Material:? Satin finish stainless steel.

4.             Capacity:?700 double-fold or 1,250 single-fold tissue sheets, minimum.

5.             Mounting: ?Surface mounted.

6.             Service Access:?Vandal resistant lock on hinged door.

Bradley Seat CoverDispensers:

5A40???????? DiplomatSeries surface mounted dispenser.? Formedwith contemporary contours, radii, and finish matching related accessories inmanufacturer's designer series.?Capacity:? 250 single fold or halffold seat covers.? Satin finish stainlesssteel.? Vandal resistant hinged lockingcover.

582?????????? Partition mounted,serves two compartments.? Capacity:? 1,000 single fold or half fold seatcovers.? Satin finish stainless steel.? Vandal resistant hinged locking cover in eachcompartment.

583 ????????? Surfacemounted.? Capacity:? 500 single fold or half fold seat covers.? Satin finish stainless steel.? Vandal resistant hinged locking cover.

5831????????? Surfacemounted.? Capacity:? 250 single fold or half fold seatcovers.? Satin finish stainlesssteel.? Insert seat covers throughopening in bottom of unit.

584?????????? Recessed.? Capacity:?500 single fold or half fold seat covers.? Satin finish stainless steel.? Vandal resistant hinged locking cover.

5847????????? ContemporarySeries recessed.? Capacity:? 500 single fold or half fold seatcovers.? Satin finish stainlesssteel.? Vandal resistant hinged lockingcover.

A.            Seat-Cover Dispenser SCD:

1.             Basis of Design:?Bradley Corp., [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

4.             Mounting:?[Recessed] [Semi-recessed] [Surface]mounted.

5.             Capacity:?[500] [250]single fold or half-fold covers.

6.             Finish:?Stainless steel satin.

7.             Service: [Vandal proof lock access.] [Latch.]

Bradley Combination (Folded)Paper Towel Dispenser and Waste Receptacle Cabinets:

2A05???????? DiplomatSeries combination cabinet including folded paper towel dispenser for 800multi-fold or 600 C-fold towels, and exposed 12 gallon key-removable stainlesssteel receptacle.? Towel dispenser doorand waste receptacle faces formed with contemporary contours, radii, and finishmatching related accessories in manufacturer's designer series. Vandalresistant lock.? Satin finish stainlesssteel.?? -00 recessed mount with flange;-10 semi-recessed mount with flange; -11 surface mount; -36 18 gallon wastereceptacle.

2037????????? Combinationcabinet including towel dispenser for 1,100 single fold, 800 multi-fold, or 600C-fold towels, and concealed 11.2 gallon removable plastic waste receptacle, andvandal resistant lock.? Satin finishstainless steel. ??-00 recessed mount;-10 semi-recessed mount; -11 surface mount.

225?????????? Combinationcabinet including towel dispenser for 1,000 single fold, 800 multi-fold, or 600C‑fold towels, and concealed 9.2 gallon removable plastic wastereceptacle, vandal resistant lock.? Satinfinish stainless steel.? -00 recessedmount with flange; -10 semi-recessed mount with flange; -11 surface mount.

2251????????? Combinationcabinet including towel dispenser for 450 multi-fold, or 250 C-fold towels, andconcealed 5.3 gallon removable plastic waste receptacle.? Vandal resistant hinged locking cover overtowel dispenser and waste compartment.?Satin finish stainless steel.? -00recessed mount with flange; ‑10 semi-recessed mount with flange; -11surface mount.

2017????????? ContemporarySeries combination cabinet including towel dispenser for 1,100 single fold, 800multi-fold, or 600 C‑fold towels, and concealed 4.9 gallon removable plasticwaste receptacle.? Vandal resistant hingedlocking cover over towel dispenser and waste compartment.? Satin finish stainless steel. ‑00 recessedmount with flange; -10 semi-recessed mount with flange; -11 surface mount.

2252????????? Combinationcabinet including towel dispenser for 1,000 single fold, 700 multi-fold, or 400C-fold towels, and concealed 4.9 gallon removable plastic waste receptacle.? Vandal resistant hinged locking cover overtowel dispenser and waste compartment.?Satin finish stainless steel.? ‑00 recessedmount with flange; -10 semi-recessed mount with flange; -11 surface mount.

2027????????? ContemporarySeries combination cabinet including towel dispenser for 800 multi-fold, or 600C-fold towels, and concealed 3.3 gallon removable plastic wastereceptacle.? Vandal resistant hingedlocking cover over towel dispenser and waste compartment.? Satin finish stainless steel.? -00 recessed mount with flange; ‑10 semi-recessedmount with flange; -11 surface mount.

2037????????? ContemporarySeries combination cabinet including towel dispenser for 1,100 single fold, 800multi-fold, or 600 C-fold towels, and concealed 11.2 gallon removable plasticwaste receptacle.? Vandal resistanthinged locking cover over towel dispenser and waste compartment.? Satin finish stainless steel.? -00 recessed mount with flange; ‑10 semi-recessedmount with flange; -11 surface mount.

2291????????? Combinationcabinet including towel dispenser for 475 multi-fold, or 350 C-fold towels, andexposed 2 gallon removable stainless steel waste receptacle.? Vandal resistant hinged locking cover over toweldispenser.? Satin finish stainless steel.? -00 recessed mount with flange; -10semi-recessed mount with flange; -11 surface mount.

2297????????? ContemporarySeries combination cabinet including towel dispenser for 475 multi-fold, or 350C-fold towels, and concealed 1.7 gallon removable plastic waste receptacle.? Vandal resistant hinged locking cover overtowel dispenser and waste receptacle.?Satin finish stainless steel.? -00recessed mount with flange; ‑10 semi-recessed mount with flange; -11surface mount.

229?????????? Combinationcabinet including towel dispenser for 200 multi-fold, or 100 C-fold towels, andexposed 1.25 gallon removable stainless steel waste receptacle.? Vandal resistant hinged locking cover overtowel dispenser and waste compartment.?Satin finish stainless steel.??-00 recessed mount with flange; -10 semi-recessed mount with flange; -11surface mount.

B.             Combination Paper Towel (Folded) Dispenser/WasteReceptacle PTFW:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Application:?[Whereindicated][insertlocation description].

4.             Includes the Following:? [Mirrored door] [Cup dispenser] [Self-closingflap door][Wastecontainer liner].

Specifier:? If required, retain descriptive characteristicsbelow and edit to match specified model.

5.             Material:?Satin stainless steel, rolled at exposed edges.

6.             Mounting:?[Recessed] [Semi-recessed] [Surface].

7.             Towel Capacity by Types:

a.             [1,100] [1,000] [710] [400] single fold towels.

b.             [800] [700] [525] [500] [475] [450] multi-fold towels.

c.             [600] [500] [400] [370] [350] [300] [200] [100] C-fold towels.

8.             Towel Delivery Method:? Bottom pull.

9.             Waste Receptacle:?

a.             Plastic, [1.7 gallons(6.4 liters)] [3.3 gallons (12.5 liters)] [4.9 gallons (18.5 liters)] [5.3 gallons (20 liters)] [9.2 gallons (35 liters)] [11.2 gallons (42 liters)].

b.             Stainless steel, [1.25 gallons(4.7 liters)] [2 gallons (7.6 liters)].

10.         Service Access:?Vandal resistant lock, universal key.

Bradley Paper Towel (Folded)Dispensers:

2A00???????? DiplomatSeries folded paper towel dispenser for 800 multi-fold, or 600 C-fold towels.Towel dispenser door formed with contemporary contours, radii, and finishmatching related accessories in manufacturer's designer series. Vandalresistant hinged locking.? Satin finishstainless steel.? -00 recessed mount withflange; -10 semi-recessed mount with flange.

2A10???????? DiplomatSeries surface mounted folded paper towel dispenser for 800 multi-fold, or 600C-fold towels. Towel dispenser door formed with contemporary contours, radii, andfinish matching related accessories in manufacturer's designer series. Vandalresistant hinged locking.? Satin finishstainless steel.

2442????????? Contemporaryseries towel dispenser for 400 multi-fold, or 300 C-fold towels.? Satin finish stainless steel cabinet. Vandalresistant hinged locking cover. -00 recessed mount with flange; -10semi-recessed mount with flange; -11 surface mount.

2447????????? Contemporaryseries towel dispenser for 800 multi-fold, or 500 C-fold towels.? Satin finish stainless steel cabinet. Vandalresistant hinged locking cover. -00 recessed mount with flange; -10semi-recessed mount with flange; -11 surface mount.

250W-15??? Frequencyseries surface mounted towel dispenser for 525 multi-fold, or 400 C-foldtowels.? Satin finish stainless steel cabinet.? Wave pattern accent matching relatedaccessories in manufacturer's designer series. Vandal resistant hinged lockingcover.

247?????????? Toweldispenser for 1,000 single fold, 800 multi-fold, or 500 C-fold towels.? Vandal resistant hinged locking.? Satin finish stainless steel.? -00 recessed mount with flange; -10semi-recessed mount with flange; -11 surface mount.

250-15?????? Surfacemounted towel dispenser for 525 multi-fold, or 400 C-fold towels. Satin finishstainless steel.? Vandal resistant hingedlocking cover.

250-33?????? Surfacemounted towel dispenser for 525 multi-fold, or 400 C-fold towels. Steel cabinetwith white enamel finish. Vandal resistant hinged locking cover.

251-15?????? Surfacemounted towel dispenser for 400 single fold towels.? Satin finish stainless steel.? Vandal resistant hinged locking cover.

251-33?????? Surfacemounted towel dispenser for 400 single fold towels. Steel cabinet with whiteenamel finish. Vandal resistant hinged locking cover.

252?????????? Surfacemounted towel dispenser for 350 multi- fold or 200 C-fold towels.? Satin finish stainless steel.? Vandal resistant hinged locking cover.

C.             Paper Towel (Folded) Dispensers PTFD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

1.             Finish and Base Material:? Satin stainless steel, rolled at exposededges, cabinet 0.030‑inch/ 22‑ga. thick; door and waste receptacle 0.036‑inch / 20‑ga. thick.

2.             Mounting:?[Recessed] [Semi-recessed] [Surface].

3.             Towel Capacity by Types:

a.             [1,100] [1,000] [710] [400] single fold towels.

b.             [800] [700] [525] [475] [450] multi-fold towels.

c.             [600] [500] [400] [370] [350] [300] [200] [100] C-fold towels.

4.             Towel Delivery Method:? Bottom pull.

5.             Service Access:?Vandal resistant lock.

Bradley 3-in-1 Paper Towel(Folded) Dispenser, Hand Dryer, and Waste Container:

270?????????? ContemporarySeries multi-purpose unit including:? toweldispenser for 710 single fold, 500 multi-fold, or 370 C-fold towels;sensor-activated hand dryer; and waste receptacle with 4.4 gal. removablepolyethylene liner. Vandal resistant and warp resistant hinged lockingdoor.? Satin finish stainless.? -00 recessed mount; -10 semi-recessed mount;-11 surface mount.

279-49?????? Identicalto 270, but CE certified and suitable for export to Europe.

D.             Combination Paper Towel (Folded) Dispenser, HandDryer, and Waste Container PTFD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

4.             Finish and Base Material:? Satin stainless steel, rolled at exposededges.

5.             Mounting:?[Recessed] [Semi-recessed] [Surface].

6.             Towel Capacity:?710 single fold, 500 multi-fold, or 370 C-fold towels.

7.             Towel Delivery Method:? Bottom pull.

8.             Waste Receptacle:? Plastic, 4.4 gallons (16.5 liters).

9.             Service Access:?Vandal resistant lock.

Specifier:? Bradley Aerix 2902-Series Sensor-OperatedAdjustable Speed Hand Dryer incorporated in the Model 270 combination unitis recommended for high use facilities and for locations where units may be placedin an accessible path.? Units arefactory-wired with universal voltage for a wide range of installations.? Adjustable fan speed allows units to be usedin sound-sensitive areas.

10.         Sensor-operated warm air hand dryer.

a.             Basis-of-Design Product:? Bradley,Aerix Adjustable Sensor-Operated Warm Air Hand Dryer Model No. 2902-2873.

b.             Discharge Temperature:? Adjustable from 106 to 111 deg F (41 to 44 deg C) at 4 inches (102 mm) distanceand ambient temperature of 70 deg F.(21 deg C).

c.             Air Speed:?Adjustable from 4920 to 9840 fpm (25 to 50 m/s).

d.             Effective Airflow:? Adjustable from 36 to 58 cfm (16.9 to 27L/s).

e.             Heating Element:?900 W (1.20 hp).

f.              Motor: Adjustable speed, 1/3 hp/250 W 50/60 Hz, [100- 120 V][208V][220-240 V].

Bradley RecessedBehind-Mirror Mounted Multi-Purpose Paper Towel (Folded) Dispensers:

194?????????? Recessedmounted assembly for mounting behind mirror, including towel dispenser for 800multi-fold or 600 C-fold towels and liquid soap dispenser, satin finishstainless steel.? Vandal resistant hingedlocking cover over towel dispenser and soap compartment.

198?????????? Recessedmounted assembly for mounting in 1/2 inch wall board surfaces behind mirror,including towel dispenser for 800 multi-fold or 600 C-fold towels, satin finishstainless steel.? Vandal resistant hingedlocking cover over towel dispenser.? For 5/8inch gypsum board, use 1985.

1981????????? Recessedmounted assembly for mounting behind mirror, including towel dispenser for 800multi-fold or 600 C-fold towels, satin finish stainless steel.? Vandal resistant hinged locking cover overtowel dispenser.

E.             Recessed Behind-Mirror Multi-Purpose Paper Towel(Folded) Dispensers MPTFD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach lavatory, unless otherwise indicated.] [Where indicated] [insert location description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Finish and Base Material:? Satin finish stainless steel.

4.             Single-fold towel minimum capacity:? [800] multi-fold or [600] C-fold.

5.             Soap Capacity:?[40 ounces (1180 ml)] [100 ounces(2950 ml)].

6.             Mounting:?[Recessedmounted][Recessedbehind-mirror mounted].

7.             Service Access:?Vandal resistant lock, same key for each compartment door.

Bradley Multi-Purpose TowelDispenser/Soap Dispensers:

130?????????? Recessed mountedassembly including towel dispenser for 800 multi-fold or 600 C-fold towels, andsoap dispenser with reservoir and manual pump.?Soap valve has chrome plated brass housing and ABS plastic mechanism.? Vandal resistant hinged locking cover overtowel dispenser and soap dispenser.? Soapcapacity: 100oz. ?-00 recessed mount; -10semi-recessed mount; ‑11 surface mount.

1471????????? Recessed mountedassembly including towel dispenser for 250 multi-fold or 150 C-fold towels, andsoap dispenser with reservoir and manual pump.?Soap valve has chrome plated brass housing and ABS plasticmechanism.? Vandal resistant hingedlocking cover over towel dispenser and soap dispenser.? -00 recessed mount; -11 surface mount.

F.             Multipurpose Paper Towel (Folded) Dispenser/SoapDispensers PTSD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Materials:?Stainless steel, rolled at exposed edges.

4.             Finish:?Satin stainless steel.

5.             Mounting:?[Recessed] [Semi-recessed] [Surface].

6.             Towel Capacity:?800 multi-fold or C-fold towels.

7.             Soap Capacity:?[40 ounces (1180 ml)] [100 ounces(2950 ml)].

8.             Towel Delivery Method:? Bottom pull.

9.             Soap Delivery Method:? Manual pump.

10.         Service Access:?Vandal resistant lock, same key for each compartment door.

Bradley Center-Pull Roll PaperTowel Dispensers:

2479????????? Recessedmounted center-pull towel dispenser for up to 9 inch wide, 9 inch diameter rolltowel stock, satin finish stainless steel, with ABS dispensing component.? Vandal resistant hinged locking toweldoor.? -00 recessed mount; -11semi-recessed mount.

G.             Paper Towel (Center Pull Roll) Dispenser PTRD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Finish and Base Materials:? Satin stainless steel, rolled at exposededges.

4.             Mounting:?[Recessed] [Semi-recessed] [Surface].

5.             Towel Capacity:?Center pull towel roll, maximum 9 by 9 inches (229 by 229 mm).

6.             Towel Delivery Method:? Center pull.

7.             Service Access:?Vandal resistant lock.

Bradley Combination Roll PaperTowel Dispenser and Waste Container Cabinets:

2A15???????? DiplomatSeries wall-mounted cabinet with mechanical roll paper towel dispenser for 8 by8 inch standard paper towel roll and exposed 18 gallon key-removable wastereceptacle. Towel dispenser door and waste receptacle faces formed withcontemporary contours, radii, and finish matching related accessories inmanufacturer's designer series. Dispenser manual push bar requires less than 5pounds force to operate.? Vandalresistant hinged locking cover over towel dispenser.? Satin finish stainless steel.? -00 recessed mount with flange; ‑10 semi-recessedmount with flange; -11 surface mount.

2A25???????? DiplomatSeries wall-mounted cabinet with sensor-activated roll paper towel dispenserfor 8 by 8 inch standard paper towel roll and exposed 18 gallon key-removablewaste receptacle. Towel dispenser door and waste receptacle faces formed withcontemporary contours, radii, and finish matching related accessories inmanufacturer's designer series. Vandal resistant hinged locking cover overtowel dispenser.? Satin finish stainlesssteel.? Towel dispenser operates with4:? D-size alkaline batteries.? -00 recessed mount with flange; ‑10 semi-recessedmount with flange; -11 surface mount.

2A95???????? DiplomatSeries wall-mounted cabinet with housing to accept separate roll paper toweldispenser and exposed 18 gallon key-removable waste receptacle. Towel dispenserdoor and waste receptacle faces formed with contemporary contours, radii, andfinish matching related accessories in manufacturer's designer series.? Vandal resistant hinged locking cover overtowel dispenser.? Satin finish stainlesssteel.? -00 recessed mount with flange; ‑10 semi-recessedmount with flange; -11 surface mount. NOTE:? Confirmowner dispenser dimensions.

227?????????? Wall-mountedcabinet with manual lever-operated towel dispenser for 8 by 8 inch standard papertowel roll and concealed18 gallon removable plastic waste receptacle. Dispenserlever requires less than 5 pounds force to operate.? Vandal resistant hinged locking cover overtowel dispenser and waste compartment.?Satin finish stainless steel.? -00recessed mount with flange; ‑10 semi-recessed mount with flange; -11 surfacemount.

2277 ???????? ContemporarySeries wall-mounted cabinet with lever-operated towel dispenser for 8 by 8 inchstandard paper towel roll and concealed 10.5 gallon removable plastic wastereceptacle.? Dispenser lever requiresless than 5 pounds force to operate.?Vandal resistant hinged locking cover over towel dispenser and wastecompartment. Satin finish stainless steel.?-00 recessed mount with flange; ‑10 semi-recessed mount withflange; ‑11 surface mount.

2271????????? Wall-mountedcabinet for towel dispenser, with concealed18 gallon removable plastic wastereceptacle.? Towel dispenser is notincluded with unit;? Bradley Model 2494 isrecommended. Vandal resistant hinged locking cover over towel dispenser andwaste compartment.? Satin finishstainless steel. ??-00 recessed mountwith flange; -10 semi-recessed mount with flange; -11 surface mount.

H.             Combination Paper Towel (Roll) Dispenser/WasteReceptacle PTRWR:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptive characteristicsbelow and edit to match specified model.

4.             Finish and Base Material:? Satin stainless steel, rolled at exposededges, cabinet 0.030‑inch/ 22‑ga. thick; door and waste receptacle 0.036‑inch / 20‑ga. thick.

5.             Mounting:?[Recessed] [Semi-recessed] [Surface].

6.             Towel Capacity:?[8 by 8 inch (203 by 203 mm) standard roll.] [Towelunit provided separately.]

7.             Towel Delivery Method: ?[Sensor-activated, battery-powered] [ADA/ABA-compliant manual lever operated].

8.             Waste Receptacle:? Concealed, removable plastic, [10.5 gallons (40 liters)] [18 gallons (68 liters)] capacity.

9.             Waste Receptacle:? Exposed, key-removable, stainless steel, [10.5 gallons (40 liters)] [18 gallons (68 liters)] capacity.

10.         Service Access:?Vandal resistant lock.

Bradley Roll Paper TowelDispenser:

2A01 ??????? DiplomatSeries manual push lever operated roll paper towel dispenser for 8 by 8 inchstandard paper towel roll.? Toweldispenser door face formed with contemporary contours, radii, and finishmatching related accessories in manufacturer's designer series.? Vandal resistant hinged locking door.? Dispenser push lever requires less than 5pounds force to operate.? Satin finishstainless steel.? -00 recessed mount withflange; ‑10 semi-recessed mount with flange; ‑11 surfacemount.

2A02 ??????? Diplomat Seriessensor activated roll paper towel dispenser for 8 by 8 inch standard papertowel roll.? Towel dispenser door faceformed with contemporary contours, radii, and finish matching relatedaccessories in manufacturer's designer series.?Vandal resistant hinged locking door.?Towel dispenser operates with 4:?D-size alkaline batteries.? -00recessed mount with flange; ‑10 semi-recessed mount with flange; ‑11 surfacemount.

2A90???????? DiplomatSeries cabinet to accept separate roll paper towel dispenser. Towel dispenserdoor face formed with contemporary contours, radii, and finish matching relatedaccessories in manufacturer's designer series.?Vandal resistant hinged locking cover.?Satin finish stainless steel.? -00recessed mount with flange; ‑10 semi-recessed mount with flange;-11 surface mount. NOTE:? Confirm owner dispenser dimensions.

2481 ???????? Manual leveroperated roll paper towel dispenser for 8 by 8 inch standard paper towel roll.? Vandal resistant hinged locking door.? Dispenser lever requires less than 5 poundsforce to operate.? Satin finish stainlesssteel.? -00 recessed mount with flange; ‑10 semi-recessedmount with flange; ‑11 surface mount.

2482-11???? Surfacemounted manual push bar operated roll paper towel dispenser for 8 by 8 inchroll paper towel.? Vandal resistanthinged locking door.? Dispenser barrequires less than 5 pounds force to operate.???Satin finish stainlesssteel.? Operating mechanism is enameledsteel.

2483????????? Surfacemounted manual lever operated roll paper towel dispenser for 8 or 9 inch wide,800 foot roll paper towel stock.? Satinfinish stainless steel.? Vandal resistanthinged locking door.? Dispenser leverrequires less than 5 pounds force to operate.

2484????????? Manual leveroperated roll paper towel dispenser for 8 or 9 inch wide standard roll paper towelstock, Vandal resistant hinged locking door.?Dispenser lever requires less than 5 pounds force to operate.? Satin finish stainless steel.? ‑00 recessed mount with flange; ‑10 semi-recessedmount with flange.

249-34?????? Surfacemounted, manual level crank operated roll paper towel dispenser for 8 or 9 inchwide standard roll paper towel stock, white baked enamel finish.? Vandal resistant hinged locking door.

2492????????? Surfacemounted, manual lever operated roll paper towel dispenser for 8 or 9 inch wide standardroll paper towel stock, white baked enamel cabinet finish with whitehigh-impact plastic door.? Vandalresistant hinged locking door.

2494????????? Surfacemounted, sensor-activated roll paper towel dispenser for 8 or 9 inch wide standardroll paper towel stock.? High impactplastic construction.? Power Source:? Four "D"cell alkaline batteries.

2495????????? Surfacemounted, manual lever operated roll paper towel dispenser for 8 or 9 inch wide standardroll paper towel stock.? High impactplastic construction.

I.               Paper Towel (Roll) Dispenser PTRD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

4.             Finish and Base Material:? [Satin stainless steel, 0.030‑inch/ 22‑ga. thick, rolled at exposed edges.] [Whitebaked enamel on steel] [High impact plastic.]

5.             Mounting:?[Recessed] [Semi-recessed] [Surface].

6.             Towel Capacity:?8 or 9 inch by 800 ft (203 or 229mm by 244 m).

7.             Towel Delivery Method:? [ADA/ABA- compliant manual lever operated] [ADA/ABA-compliant manual crank operated] [ADA/ABA- compliant manual push bar operated] [Sensoractivated, battery powered].

8.             Service Access:?Vandal resistant lock.

Bradley Deck-Mounted LiquidSoap Dispensers:?

6315????????? Deckmounted, sensor operated liquid soap dispenser.?5-1/2 inch spout.? Power:? 4 "D" cell batteries.? Include LED indicators for low battery andlow soap level.? Fabricated from chromeplated plastic.? 27 or 54 oz. soap bottle.? -KT:?Includes batteries and 1000 shot soap.

6322????????? Deckmounted, hand pump operated liquid soap dispenser.? 2-1/2 inch spout.? Pump only.?Plunger and spout fabricated from stainless steel.? ‑67: 16 oz. stainless steel soap bottle.? ‑68:  32 oz. plastic soap bottle.

6324????????? Deckmounted, hand pump operated liquid soap dispenser.? 4 inch spout.?Pump only.? Plunger and spout fabricatedfrom stainless steel.? ‑67: 16 oz.stainless steel soap bottle.? ‑68: 32 oz. plastic soap bottle.

6326????????? Deckmounted, hand pump operated liquid soap dispenser.? 6 inch spout.?Pump only.? Plunger and spoutfabricated from stainless steel.? ‑67:16 oz. stainless steel soap bottle.? ‑68: 32 oz. plastic soap bottle.

6334????????? Deckmounted, hand pump operated liquid soap dispenser, including plastic 16 oz.soap bottle.? Plunger and spoutfabricated from chrome plated brass.

J.              Liquid-Soap Dispenser Deck Mounted SD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Description: ?Designed for dispensing soap in liquid formfrom under-counter reservoir.

4.             Materials:?[Chromedplastic.][Stainlesssteel plunger and spout, brass escutcheon.] [Plastic] [Stainless steel] globe.

5.             Operation:?[Sensoroperated.][Manualpump.]

6.             Mounting:?Vertically oriented, surface mounted.

7.             Spout:? [2-1/2 inch (63 mm)] [4 inch (102 mm)] [5-1/2 inch (140 mm)] [6 inch (152 mm)].

8.             Soap Capacity:?[16 ounces (475 ml)] [24 ounces(710 ml)] [27 ounces (800 ml).] [32 ounces (945 ml)] [40 ounces (1180 ml)] [44 ounces (1300 ml)] [54 ounces (1,600 ml).] [80 ounces (2360 ml)].

Bradley Recessed Wall-MountedLiquid Soap Dispensers:

643?????????? Recessedmounted, satin finish stainless steel with high impact polystyrene lined soapvessel.? Chrome plated brass soap valvewith ABS plastic mechanism.? 32 oz.capacity.? Vandal resistant hingedlocking cover.

6437????????? ContemporarySeries recessed mounted, satin finish stainless steel with high impactpolystyrene lined soap vessel.? Faceplate and soap vessel are an integral assembly.?Chrome plated brass soap valve with ABS plastic mechanism.? 32 oz. capacity.? Vandal resistant hinged locking cover.

644?????????? Recessedmounted, satin finish stainless steel.?Face plate and soap vessel are an integral assembly.? Chrome plated brass soap valve with ABSplastic mechanism.? 40 oz. capacity.? Vandal resistant hinged locking cover.

Bradley SurfaceWall-Mounted Liquid Soap Dispensers:

648?????????? Surfacemounted assembly including top mounted 16 oz. translucent plastic container, zincplated steel mounting bracket with 360 degree swivel for easy globe removal.? Push-up valve made of chrome plated movingparts, stainless steel spring, and neoprene washers.

6481????????? Same asModel 648, but with chrome plated plastic, non-swivel mounting bracket.

650 ????????? Surfacemounted assembly including top mounted 32 oz. translucent plastic container,chrome plated ABS plastic mounting bracket.?Push-up valve made of ABS plastic moving parts, and stainless steelspring.

6501????????? Surfacemounted assembly including top mounted 24 oz. translucent plastic container,chrome plated ABS plastic mounting bracket.?Push-up valve made of ABS plastic moving parts, and stainless steelspring.

6531????????? Surfacemounted, satin finish stainless steel housing and soap vessel.? Includes metal wall plate mechanically lockedto dispenser.? Chrome plated brass soapvalve with ABS plastic mechanism.? 44 oz.capacity.? Removable cover for service.

6542????????? Surfacemounted, satin finish stainless steel housing and soap vessel.? Includes metal wall plate mechanically lockedto dispenser.? Chrome plated brass soapvalve with ABS plastic mechanism.? 40 oz.capacity.? Keyed fill hole for service.

655?????????? Surfacemounted, satin finish stainless steel housing and soap vessel.? Includes metal wall plate mechanically lockedto dispenser.? Push up type chrome platedbrass soap valve with ABS plastic mechanism.?40 oz. capacity.? Keyed fill holefor service.

6562????????? Surfacemounted, satin finish stainless steel housing and soap vessel.? Includes metal wall plate mechanically lockedto dispenser.? Chrome plated brass soapvalve with ABS plastic mechanism.? 40 oz.capacity.? Keyed fill hole for service.

657?????????? Surfacemounted, high polish chrome plated brass container and plastic soapcontainer.? Includes stainless steel wallplate.? Push in type chrome plated plasticvalve with ABS plastic mechanism.? 12 oz.capacity.? Keyed fill hole for service,with locking chain.

658-30?????? Surfacemounted, satin finish stainless steel round housing and powdered soapvessel.? Includes chrome plated steelwall plate.? Push type knob to dispensesoap powder.? 32 oz. capacity.? Keyed tilting lid for service.

6583????????? Surfacemounted, satin finish stainless steel rectangular housing and powdered soapvessel.? Includes chrome plated steelwall plate.? Push type knob to dispensesoap powder through adjustable mechanism.?32 oz. capacity.? Keyed fill holefor service.

661?????????? Surfacemounted, shelf type, satin finish stainless steel housing and soap vessel.? Includes metal wall plate.? Single chrome plated brass soap valve withABS plastic mechanism.? 80 oz.capacity.? Hinged cover with latches forservice.

662?????????? Same asModel 661, but with 2 soap valves.

6843????????? Surfacemounted dispenser with stainless steel spout projecting 9 inches from face ofwall.? Foot pump operated.? ABS plastic dispenser with translucentpolyethylene plastic soap container, molded rubber foot pump, and vinyl tubing.

6563????????? Surfacemounted, satin finish stainless steel rectangular housing and liquid soapvessel.? Includes chrome plated steelwall plate.? Black ABS plastic push valve? to dispense liquid soap through adjustablemechanism.? 40 oz. capacity.? Keyed fill hole for service.

K.             Liquid-Soap Dispenser Wall Mounted SD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Housing:? [Satinstainless steel.][Chrome-platedbrass.][Chromedplastic.][Translucentplastic.]

4.             Operation:?[Sensoroperated.][Stainlesssteel manual pump.] [Chrome-plated brass and ABS plastic manualpump.][ABSplastic manual pump.] [Foot pump operated with 9 inch (229 mm)stainless steel spout.]

5.             Mounting:?[Surfacemounted.][Recessedmounted.]

6.             Soap Capacity: ?[16 ounces (475 ml)] [24 ounces (710 ml)] [27 ounces (800 ml).] [32 ounces (945 ml)] [40 ounces (1180 ml)] [44 ounces (1300 ml)] [54 ounces (1,600 ml).] [80 ounces (2360 ml)].

Bradley Wall-MountedEnclosed Waste Receptacles:

3157????????? ContemporarySeries recessed enclosed waste receptacle, satin stainless steel with seamlesswelded construction. Face formed with contemporary contours, radii, and finishmatching related accessories in manufacturer's designer series.? 22 ga. flange, cabinet, and push flapdoor.? 18 ga. door with 1/2 inch return,concealed piano hinge and two tumbler locks. Removable 9.2 gal. leakproof moldedplastic waste receptacle insert. -10:?Semi-recessed 3 inches, projecting 3-3/4 inches.? -11:?Surface-mounted, projecting 6-3/4 inches.

3257????????? ContemporarySeries recessed enclosed waste receptacle, satin stainless steel with seamlesswelded construction. 22 ga. flange, cabinet, and push flap door.? 18 ga. door with 1/2 inch return, concealedpiano hinge and tumbler lock. Removable 2.8 gal. leakproof molded plastic wastereceptacle insert. -10:? Semi-recessed1-1/2 inches, projecting 2-1/2 inches.?-11:? Surface-mounted, projecting4 inches.

315-35?????? Recessedenclosed waste receptacle, satin stainless steel with seamless weldedconstruction. 22 ga. flange, cabinet, and push flap door.? 18 ga. door with piano hinge and tumblerlock. Removable 9.2 gal. leakproof molded plastic waste receptacle insert.-10:? Semi-recessed 3-1/2 inches,projecting 4 inches.? -11:? Surface-mounted, projecting 7-1/2 inches.

3251????????? Recessed enclosedwaste receptacle, satin stainless steel with seamless welded construction. 22ga. flange, cabinet, and push flap door embossed "PUSH".? 18 ga. door with piano hinge and tumblerlock. Removable 2.8 gal. leakproof molded plastic waste receptacle insert.-10:? Semi-recessed 2 inches, projecting2 inches.? -11:? Surface-mounted, projecting 4 inches.

L.              Waste Receptacle, Wall-Mounted, Enclosed WR:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Application:?

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

4.             Mounting: [Recessed] [Semi-recessed] [Surface-mounted].

5.             Capacity:?[9.2 gal. (34.8 L)] [2.8 gal. (10.6 L)].

6.             Material and Finish:? Stainless steel, No. 4 finish (satin).

7.             Cabinet and Flange:? 22 ga.

Specifier:? Select one ofthree door subparagraphs below.? Secondparagraph describes Bradley "Contemporary Series" unit.

8.             Door:? 18ga., with piano hinge, tumbler lock, and push flap door[, embossed "PUSH'].

9.             Door:? 18ga. overlay style, with concealed piano hinge, tumbler lock, and push flapdoor.

Bradley Wall-Mounted WasteReceptacles:

3A05???????? DiplomatSeries waste receptacle, satin stainless steel with seamless weldedconstruction.? 12 gal. capacity.? Face formed with contemporary contours,radii, and finish matching related accessories in manufacturer's designerseries. 20 ga. satin finish stainless steel. Secured to wall through rearmounting holes.? -36 18 gal capacity. -00Recessed 4 inches, projects 8-3/4 inches.?-10:? Semi-recessed 2 inches,projecting 10‑3/4 inches.? ‑11:  Surface-mounted,projecting 12-3/4 inches.

3A15???????? DiplomatSeries surface-mounted waste receptacle, satin stainless steel with seamlesswelded construction.? 16.5 gal.capacity.? Face formed with contemporarycontours, radii, and finish matching related accessories in manufacturer'sdesigner series. 20 ga. satin finish stainless steel. Secured to wall throughrear mounting holes.? Surface-mounted,projecting 9 inches.

355W??????? FrequencySeries surface-mounted waste receptacle with wave pattern accent, satinstainless steel with seamless welded construction. Fixed 20.6 gal. 22 ga.stainless steel waste receptacle secured to wall through rear mountingholes.? Optional hinged satin stainlesssteel receptacle cover with optional push flap door embossed"PUSH".? Optional vinyl-coatednylon receptacle liner installed with hook and loop fasteners.? Projects 12-1/2 inches.

334?????????? Recessedwaste receptacle, satin stainless steel with seamless welded construction. 22ga. flange and cabinet.? Removable 18gal. 22 ga. stainless steel waste receptacle secured to cabinet with tumblerlock.? Optional hinged satin stainlesssteel receptacle cover with optional?push flap door.? Optional vinyl?coated nylon receptacle liner.? -00Recessed 4 inches, projects 8-3/4 inches.?-10:? Semi-recessed 2 inches,projecting 10‑3/4 inches.?-11:  Surface-mounted, projecting 12-3/4 inches.

344?????????? Recessedwaste receptacle, satin stainless steel with seamless welded construction. 22ga. flange and cabinet.? Removable 12gal. 22 ga. stainless steel waste receptacle secured to cabinet with tumblerlock.? Optional hinged satin stainlesssteel receptacle cover with optional push flap door embossed"PUSH".? Optional vinyl ?coatednylon receptacle liner.? Projects 4-3/4inches.? -10:? Semi-recessed 2 inches, projecting 6‑3/4inches.? -11:  Surface-mounted,projecting 8-3/4 inches.

346?????????? Recessedwaste receptacle, satin stainless steel with seamless welded construction. 22ga. flange and cabinet.? Removable 12gal. 22 ga. stainless steel waste receptacle secured to cabinet with tumblerlock.? Optional hinged satin stainlesssteel receptacle cover with optional?push flap door embossed "PUSH".? Optional vinyl ?coated nylon receptacleliner.? Projects 2-3/4 inches.? -10:?Semi-recessed 4 inches, projecting 4‑3/4 inches.? -11:  Surface-mounted, projecting8-3/4 inches.

355?????????? Surface-mountedwaste receptacle, satin stainless steel with seamless welded construction.Fixed 20.6 gal. 22 ga. stainless steel waste receptacle secured to wall throughrear mounting holes.? Optional hinged satinstainless steel receptacle cover with optional push flap door embossed"PUSH".? Optional vinyl ?coatednylon receptacle liner installed with hook and loop fasteners.? Projects 12-1/2 inches.

356?????????? Surface-mountedwaste receptacle, satin stainless steel with seamless welded construction.Fixed 16.5 gal. 22 ga. stainless steel waste receptacle secured to wall throughrear mounting holes.? Optional hingedsatin stainless steel receptacle cover.?Optional vinyl ?coated nylon receptacle liner installed with hook andloop fasteners.? Projects 12-1/2 inches.

357?????????? Surface-mountedwaste receptacle, satin stainless steel with seamless welded construction.Fixed 6.5 gal. 22 ga. stainless steel waste receptacle secured to wall throughrear mounting holes.? Optional hingedsatin stainless steel receptacle cover.?Optional vinyl ?coated nylon receptacle liner installed with hook andloop fasteners.? Projects 6-1/2 inches.

359?????????? Surface-mountedfacial tissue receptacle, satin stainless steel with seamless welded construction.Fixed 1.5 gal. 22 ga. stainless steel waste receptacle secured to wall throughrear mounting holes.? Optionalreplaceable wet-strength paper liners.?Projects 4-1/2 inches.

M.            Waste Receptacle, Wall-Mounted WR:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Design: [Manufacturer's standard] [Manufacturer's designer series].

3.             Mounting: [Recessed] [Semi-recessed] [Surface-mounted].

Specifier:? If required,retain descriptive characteristics below and edit to match specified model.

4.             Capacity:?[20.6 gal. (78 L)] [18 gal. (68 L)] [16.5 gal. (62.5 L)] [12 gal.(45.4 L)][6.5 gal. (24.6 L)].

5.             Material and Finish:? Stainless steel, 22 ga., No. 4 finish(satin).

6.             Receptacle:?22 ga., seamless, secured to cabinet with tumbler lock.

Other Bradley WasteReceptacles and Accessories:

377?????????? Free-standingwaste receptacle, satin stainless steel with seamless welded construction,equipped with vinyl wall bumper strip and rubber feet. 13 gal. 22 ga.capacity.? Optional hinged satinstainless steel swing top.? -36:? 21 gal.?-38:? 36-gal.

P10-696???? Waste chutefor under-counter waste receptacles.?Stainless steel, drawn one-piece construction, 6 inch diameter opening,self-rimming.

N.             Waste Receptacle, Freestanding WR:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Location: [Under waste chute] [As indicated].

Specifier:? If required,retain descriptive characteristics below and edit to match specified model.

3.             Capacity:?[13 gal. (49.2 L)] [21 gal. (79.5 L)] [36 gal. (136.3 L)].

4.             Material and Finish:? Stainless steel, 22 ga., No. 4 finish(satin).

5.             Receptacle:?22 ga., seamless, with vinyl wall bumper strip and rubber feet.

Specifier:? Retain optionalswing top or waste chute as required for project.

6.             Swing top:?Stainless steel, with 2-side access.

7.             Countertop Waste Chute:? Stainless steel, self-rimming, 6 inch (152 mm) diameter.

Bradley FixedGrab Bars:

812?????????? 1-1/2 incho.d.? 18 ga stainless steel tubing.? 3-1/8 inch diameter 13 ga flanges; 22 gastainless steel escutcheons.? SatinSafety grip, high polish, or safety grip with high polish finishes.? 817:?Less escutcheons.?

832?????????? 1-1/4 incho.d.? 18 ga stainless steel tubing.? 3-1/8 inch diameter 13 ga flanges; 22 gastainless steel escutcheons.? Satinsafety grip, high polish, or safety grip with high polish finishes.? 837:?less escutcheons.

852?????????? 1-incho.d.? 18 ga stainless steel tubing.? 3-1/8 inch diameter 13 ga flanges; 22 gastainless steel escutcheons.? Satinsafety grip, high polish, or safety grip with high polish finishes.? 857:?less escutcheons.

O.            Fixed Grab Bars [GB36], [GB42], [GB48]:

1.             Basis of Design, Fixed Grab Bar:? BradleyCorp., [Model 812 series 1-1/2inch (38 mm) diameter] [Model 832 series 1-1/4 inch (32 mm) diameter]? [Model 852 series 1 inch(25 mm) diameter].

2.             Application:?[Whereindicated][insertlocation description].

3.             Mounting:?[Flangeswith concealed fasteners] [Exposed flanges].

4.             Material: Stainless steel, 0.05inch (1.27 mm) thick.

5.             Length:? [Asdesignated][Asindicated].

6.             Finish:? [Satin] [Safetygrip][Highpolish][Safetygrip with high polish].

Bradley Swinging Grab Bars:

8170-158?? 1-1/2 incho.d.? 18 ga stainless steel tubing.? 3/16 inch thick wall and floor flanges; 22 gasatin finish on exposed surfaces.?Includes alignment notches and pins to hold bar when swung into supportand departure positions.? -1:? Includes integral toilet tissue dispenser.

8370-101?? 1-1/4 incho.d.? 18 ga stainless steel tubing withsatin finish on exposed surfaces.? Satinor safety grip finishes.? 14 ga stainlesssteel wall plate.? Lowers to horizontalposition for support, and raises to vertical position for departure.? Projects 29 inches.

8370-102?? 1-1/4 incho.d. 18 ga stainless steel tubing with satin finish on exposed surfaces.? Satin or safety grip finishes.? 14 ga stainless steel wall plate.? Lowers to horizontal position for support, andraises to vertical position for departure.?Projects 34 inches.

8370-103?? 1-1/4 incho.d. 18 ga stainless steel tubing with satin finish on exposed surfaces.? Satin or safety grip finishes.? 14 ga stainless steel wall plate.? Lowers to horizontal position for support,and raises to vertical position for departure.?Includes integral toilet tissue dispenser with ABS plastic spindle.

P.             Swinging Grab Bars GBS:

1.             Basis of Design, Horizontal Swing Away GrabBar:? Bradley Corp., Model 8170 series, ?1‑1/2inch (38 mm) diameter by 29-3/4inch (756 mm) length.

2.             Basis of Design, Vertical Swing Up GrabBar:? Bradley Corp., Model 8370 series, 1-1/4 inch (32 mm) diameter by [29 inch (737 mm) length] [34inch (864 mm) length, with integral toilet tissue dispenser].

3.             Application:?[Whereindicated][insertlocation description].

4.             Mounting:?[Flangeswith concealed fasteners] [Exposed flanges].

5.             Material:?Stainless steel, 0.05 inch (1.27mm) thick.

6.             Finish:? [Satin] [Safetygrip][Highpolish][Safetygrip with high polish].

Bradley Sanitary ProductVendors:

4A20???????? DiplomatSeries.? Cabinet with vending mechanismfor sanitary napkins and tampons, owner set from free, $0.10, $0.25, $0.50, or$1.00.? Vendor door face formed withcontemporary contours, radii, and finish matching related accessories inmanufacturer's designer series.? Vendcapacity:? 18 sanitary napkins and 28tampons.? Hinged door includes two vandalresistant locks.? Coin box lock isdifferent than cabinet key.? Stainlesssteel cabinet with satin finish.?Adjustable flange permits recessed or semi-recessed mounting, or may bediscarded for surface mounting.?

401?????????? Stainlesssteel cabinet with satin finish.? Onevending mechanism each for sanitary napkins and tampons.? Vending mechanisms owner set from free,$0.10, $0.25, $0.50, or $1.00.? Vendcapacity:? 30 sanitary napkins and 28tampons.? Hinged door includes two vandalresistant locks.? Coin box lock isdifferent than cabinet key.? Adjustableflange permits recessed or semi-recessed mounting, or may be discarded for surfacemounting.?

4017 ???????? ContemporarySeries stainless steel cabinet with satin finish.? One vending mechanism each for sanitarynapkins and tampons.? Vending mechanismscan be selected from free, $0.10, $0.25, $0.50, or $1.00.? Vend capacity:? 30 sanitary napkins and 28 tampons.? Hinged door includes two vandal resistantlocks.? Coin box lock is different thancabinet key.? -00 recessed mount; ‑10 semi-recessedmount; ‑11 surface mount

402?????????? Stainlesssteel cabinet with satin finish.? Onevending mechanism for sanitary napkins.?Vending mechanism can be selected from free, $0.10, $0.25, $0.50, or$1.00.? Vend capacity:? 30 sanitary napkins.? Hinged door includes two vandal resistantlocks.? Coin box lock is different thancabinet key.? Adjustable flange permitsrecessed or semi-recessed mounting, or may be discarded for surface mounting.

403?????????? Stainlesssteel cabinet with satin finish.? RemovablePlastic waste receptacle with wax paper liner and stainless steel push flapdoor.? One vending mechanism each forsanitary napkins and tampons.? Vendingmechanisms can be selected from free, $0.10, $0.25, $0.50, or $1.00.? Vend capacity:? 30 sanitary napkins and 28 tampons.? Hinged door includes two vandal resistantlocks.? Coin box lock is different thancabinet key.? Adjustable flange permitsrecessed or semi-recessed mounting, or may be discarded for surface mounting.

404 ????????? Stainlesssteel cabinet with satin finish.? Onevending mechanism for condoms.? Vendingmechanisms can be selected from free, $0.10, $0.25, $0.50, or $1.00.? Vend capacity:? 120 condoms.?Hinged door includes two vandal resistant locks.? Coin box lock is different than cabinet key.? -00 recessed mount;? ‑11 surface mount

407 ????????? ContemporarySeries stainless steel cabinet with satin finish.? One vending mechanism each for sanitarynapkins and tampons.? Vending mechanismscan be selected from free, $0.10, $0.25, $0.50, or $1.00.? Vend capacity:? 18 sanitary napkins and 28 tampons.? Hinged door includes two vandal resistantlocks.? Coin box lock is different thancabinet key.? -00 recessed mount; ‑11 surfacemount

426?????????? ContemporarySeries, surface mounted.? Stainless steelcabinet with satin finish.? One vendingmechanism each for sanitary napkins and tampons.? Vending mechanisms can be selected from free,$0.10, $0.25, $0.50, or $1.00.? Vendcapacity:? 30 sanitary napkins and 28tampons.? Hinged door includes two vandalresistant locks.? Coin box lock isdifferent than cabinet key.

428?????????? Stainlesssteel cabinet with satin finish.? Plasticwaste receptacle with wax paper liner and stainless steel push flap door.? One vending mechanism each for sanitarynapkins and tampons.? Vending mechanismscan be selected from free, $0.10, $0.25, $0.50, or $1.00.? Vend capacity:? 30 sanitary napkins and 28 tampons.? Hinged door includes two vandal resistantlocks.? Coin box lock is different thancabinet key.

Q.            Sanitary Product Vendor SPV:

1.             Basis of Design:?Bradley Corp., [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

3.             Design: [Manufacturer's standard] [Manufacturer's designer series].

4.             Mounting: [Recessed] [Semi-recessed] [Surface].

5.             Vendor Capacity: 18 napkins; 28 tampons.

6.             Coin mechanism:?[Free] [$0.25] [$0.50] [$1.00].

7.             Finish and Base Material:? Stainless steel, satin finish.

Sanitary Product DisposalUnits:?

4A01???????? DiplomatSeries partition mounted disposal, serves two compartments.? Stainless steel construction, with satinfinish.? Disposal face formed withcontemporary contours, radii, and finish matching related accessories inmanufacturer's designer series.? 1.5gallon waste container.? Push flap dooron each side.? Vandal resistant lock onone side.

4A00???????? DiplomatSeries disposal.? Stainless steelconstruction, with satin finish.?Disposal face formed with contemporary contours, radii, and finishmatching related accessories in manufacturer's designer series.? 1.5 gallon waste container.? Push flap door.? Vandal resistant lock.? -00 recessed mount; ‑10 semi-recessedmount.

4A10???????? DiplomatSeries surface-mounted disposal.?Stainless steel construction, with satin finish.? Disposal face formed with contemporarycontours, radii, and finish matching related accessories in manufacturer'sdesigner series.? 1.5 gallon wastecontainer.? Push flap door.? Vandal resistant lock.

4721-15???? Partitionmounted, serves two compartments.?Stainless steel construction, with satin finish.? 1.5 gallon waste container.? Push flap door on each side.? Vandal resistant lock on one side.

4722-1015 Semi-recessed.? Stainless steel construction, with satinfinish.? 1.5 gallon waste container.? Push flap door.? Vandal resistant lock.

4722-15???? Surfacemounted.? Stainless steel construction,with satin finish.? 1.5 gallon wastecontainer.? Push flap door.? Vandal resistant lock.

4731-15???? Recessed.? Stainless steel construction, with satin finish.? 1.5 gallon waste container.? Push flap door.? Vandal resistant.

4737 ???????? ContemporarySeries, recessed mounted.? Stainlesssteel construction, with satin finish.?1.5 gallon waste container.? Pushflap door.? Vandal resistant lock. -00recessed mount; -10 semi-recessed mount; ‑11 surface mount.

4781-15???? Surfacemounted.? Stainless steel construction,with satin finish.? 1.25 gallon wastecontainer with wax paper liner.? Liftflap door.? Vandal resistant lock forservice.?

4791-15???? Same as4781-15, but includes 28 square inch shelf.

R.             Sanitary Product Disposal Unit SDU:

1.             Basis of Design:?Bradley Corp., [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

3.             Design: [Manufacturer's standard] [Manufacturer's designer series].

4.             Mounting:?[Recessed] [Semi-recessed] [Surface]mounted.

5.             Configuration:?[Single-sided] [Dual-sidedwith single-sided unit on side wall of odd-numbered end compartments whereapplicable].

6.             Receptacle: Removable, with vandal-proof lock,capacity [1.25 gal (4.7 L)] [1.5 gal (5.7 L)].

7.             Finish:?Stainless steel satin

Bradley Purse Shelves:

7510????????? Surfacemounted stainless steel shelf.? Stainlesssteel support brackets welded to shelf.?Satin finish.? Standard lengths:? 12 to 112 inches by 10 inches deep.

7511W?????? Surfacemounted 1/4 inch-thick clear tempered glass shelf with wave design and polishededges.? Zamac support brackets with mattechrome finish.? Glass rest on, but doesnot attach to support brackets.? Standardlengths:? 30, 60, 90 inches by 11 inchesdeep.

7512????????? Same asModel 7510, but 12 inches deep.

755?????????? Surfacemounted stainless steel shelf.? Stainlesssteel integral end support brackets and intermediate brackets welded toshelf.? Satin finish.? Standard lengths:? 6 to 112 inches by 5 inches deep.? 756:? 6inches deep.? 758:? 8 inches deep.

760?????????? Recessedstainless steel shelf.? Satinfinish.? Dimensions:? 18 by 8-1/2 by 4 inches deep.

790?????????? Surfacemounted die cast zinc fold down shelf.?Chrome plated finish.? Held inupright position by spring.? Returns toupright position when weight is removed.?Maximum load:? 150 pounds.

S.             Purse Shelf PS:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

3.             Mounting:?Surface mounted on wall or partition [, fold-down].

4.             Material:?[Temperedglass.][Stainlesssteel.][Diecast zinc.]

5.             Finish:? [Stainlesssteel satin][Chromeplated.] [Temperedglass.]

Bradley Mirrors:

740?????????? Fixedtilt, stainless steel frame with welded stiffeners.? Galvanized steel back secured to frame withconcealed fasteners.? Mirror:? 1/4 inch float glass, triple silver platedwith electro copper plated layer and thermosetting, infrared cured paintbacking with Poly-Glaze finish.? Conformsto ASTM C 1036.? Includes wedge ofextruded polystyrene between mirror and steel back. ?

Options:? Tempered glass; laminated glass;polished No. 8 stainless steel; bright annealed stainless steel; Plexiglass. ??Sizes 18 by 30, 18 by 36, and 24 by 36 inchesare standard; other sizes are available.?Maximum size: 48 (W) by 48 (H) inches.?For tempered glass, one dimension must be greater than 25 inches.

7405????????? Fixedtilt, stainless steel frame with welded stiffeners and 5-1/2 inch deep shelfthe full width of the mirror unit.?Galvanized steel back secured to frame with concealed fasteners.? Mirror:?1/4 inch float glass, triple silver plated with electro copper platedlayer and thermosetting, infrared cured paint backing with Poly-Glazefinish.? Conforms to ASTM C 1036.? Includes wedge of extruded polystyrenebetween mirror and steel back.?

Options:? Tempered glass; laminatedglass; polished No. 8 stainless steel; bright annealed stainless steel;Plexiglass.?? Sizes 18 by 30, 18 by 36,and 24 by 36 inches are standard; other sizes are available.? Maximum size: 48 (W) by 48 (H) inches.? For tempered glass, one dimension must begreater than 25 inches.

747?????????? Surfacemount, frameless with clip fasteners.?Mirror:? 1/4 inch float glass,triple silver plated with electro copper plated layer and thermosetting,infrared cured paint backing with Poly-Glaze finish.? Conforms to ASTM C 1036.?

Options:? Tempered glass mirror.?? 24 by 36 inches is standard; other sizes areavailable.? Maximum size: 60 (W) by 96(H) inches.? For tempered glass, onedimension must be greater than 25 inches.

7471????????? Same asModel 747 but mounted with screws and plastic rosettes.? Tempered glass option is not available.?? Many Sizes are available.? Maximum size: 48 (W) by 72 (H) inches.

747W??????? Same asModel 747, but with wave top edge or bead blasted wave at straight topedge.? Sizes:? 30, 60, or 90 inches wide by 36 incheshigh.? Float glass only.

748?????????? Surfacemount 304 stainless steel mirror with No. 8 bright finish. Tempered Masonitebonded to mirror with adhesive.? Maximumsize:? 47-1/2(W) by 72 (H) inches.

7481????????? Surfacemount bright annealed, stretcher leveled, 430 stainless steel mirror.? Tempered Masonite bonded to mirror withadhesive. ??Maximum size:? 47-1/2(W) by 72 (H) inches.

780?????????? Stainlesssteel angle frame with stiffeners, and bevel at mirror surface to assure fullcontact.? Galvanized steel back securedto frame with concealed fasteners.?Mirror:? 1/4 inch float glass,triple silver plated with electro copper plated layer and thermosetting,infrared cured paint backing with Poly-Glaze finish. All edges protected byshock-absorbing neoprene tubing. ?Conforms to ASTM C 1036.? Includes wedge of extruded polystyrenebetween mirror and steel back.? Includescold rolled steel wall hangers.?

Options:? Tempered glass; laminatedglass; polished No. 8 stainless steel; bright annealed stainless steel;Plexiglass.?? Sizes 18 by 30, 18 by 36,24 by 36, and 24 by 60 inches are standard; other sizes are available.? Maximum size: 120 (W) by 72 (H) inches.? For tempered glass, one dimension must begreater than 25 inches.

7805????????? Same asModel 780, but with 5-1/2 inch stainless steel shelf.? Maximum size: 96 (W) by 60 (H) inches.? For tempered glass, one dimension must begreater than 25 inches.

781?????????? Stainlesssteel channel frame with stiffeners.?Galvanized steel back secured to frame with concealed fasteners.? Mirror:?1/4 inch float glass, triple silver plated with electro copper platedlayer and thermosetting, infrared cured paint backing with Poly-Glaze finish. Alledges protected by shock-absorbing neoprene tubing.? Conforms to ASTM C 1036.? Includes wedge of extruded polystyrenebetween mirror and steel back.? Includescold rolled steel wall hangers.?

Options:? Tempered glass; laminatedglass; polished No. 8 stainless steel; bright annealed stainless steel;Plexiglass.?? Sizes 18 by 24, 18 by 30,18 by 36, 24 by 30, 24 by 36, 24 by 36 tempered glass, and 24 by 60 inches arestandard; other sizes are available.?Maximum size: 120 (W) by 72 (H) inches.?For tempered glass, one dimension must be greater than 25 inches.

7815????????? Same asModel 781, but with 5-1/2 inch stainless steel shelf.? Size 24 by 36 is standard; other sizes areavailable.? Maximum size: 96 (W) by 60(H) inches.? For tempered glass, onedimension must be greater than 25 inches.

782?????????? Adjustabletilt, stainless steel frame with integral stiffeners.? Galvanized steel back secured to frame withconcealed fasteners.? Mirror:? 1/4 inch float glass, triple silver platedwith electro copper plated layer and thermosetting, infrared cured paintbacking with Poly-Glaze finish.? Conformsto ASTM C 1036.? Includes wedge ofextruded polystyrene between mirror and steel back.?

Options:? Tempered glass; laminatedglass; polished No. 8 stainless steel; bright annealed stainless steel;Plexiglass.

T.             Mirror Unit MG:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Size and Application:? [18 by 30 inches (457 by 762 mm)] [__ by __ inches (___ by ___ mm)],[Ateach wash station] [Where indicated] [insert location description].

3.             Frame:? [Stainless-steelangle, mitered and welded, with tamper- and theft-resistant installation.] [Stainlesssteel channel, mitered and welded, with tamper- and theft-resistantinstallation.][Frameless.] [Adjustabletilt.]

Specifier:? Select mirrorglass type from list below.

4.             Mirror:?

a.             1/4 inch (6mm) thick, float glass, triple silvered, electro-copper plated withbaked enamel finish.

b.             1/4 inch (6mm) thick, tempered glass, triple silvered, electro-copper plated withbaked enamel finish.

c.             1/4 inch (6mm) thick, laminated glass, triple silvered, electro-copper plated withbaked enamel finish.

d.             No. 8 polished stainless steel.

e.             Bright annealed stainless steel.

f.              Plexiglass mirror.

Bath Accessories:?

Additional toilet and bath accessories are listed in Bradley'sSection 10 28 16 BATH ACCESSORIES which may be copied into this section asneeded to meet project or firm master section requirements.

2.4                   PUBLIC-USE SHOWER ROOM ACCESSORIES

ShowerCurtain Rods:

953 ????????? Straightshower curtain rod with stainless steel mounting flanges and exposedfasteners.? 1 inch o.d. seamlessstainless steel tubing with satin finish on exposed surfaces.? Suitable for 36 to 72 inch shower stall.? For 72 inch length and greater, also specifyshower rod ceiling support.? -78:? Bright polished finish.

9531????????? Same asModel 953, but 1-1/4 inch o.d. tubing.

9530????????? Curvedshower curtain rod with swiveled mounting brackets, satin finish.? 1 inch o.d. seamless stainless steel tubingwith satin finish on exposed surfaces.?Supports 50 pounds.? -60:? 60 inch.?-72:? 72 inch.? 0078:?Bright polished finish.

9538????????? Same asModel 953, but with plastic mounting flanges and stainless steel snap-onescutcheons to conceal hardware.

9539????????? Same asModel 9538, but 1-1/4 inch o.d. tubing.

A.             Shower Curtain Rod SCR:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Description:?[1 inch (25 mm)] [1-1/4 inch (32 mm)] OD 0.05 inch (12.7 mm) thick stainless steel tubing, [curved] [straight].

3.             Mounting Flanges:? [Stainless-steel flanges with exposedfasteners.][Plasticflanges with stainless steel snap-on escutcheons.]? Provide ceiling bracket where recommended bymanufacturer.

4.             Finish:? [Satin] [Brightpolished].

Shower Curtains:

Width Tolerances:? 36inches:? Plus or minus 3 inches.? 42 inches:?Plus or minus 1 inch.? 48inches:? Plus or minus 1 inch.? 54 inches:?Plus or minus 5 inches.? 72inches:? Plus or minus 3 inches.

9533????????? Antimicrobial6 ga. vinyl shower curtain, white.?Hemmed edges and aluminum grommets on 6 inch centers at top edge.? Sizes:?36, 42, and 72 (W) by 72 (H) inches.

9534????????? 8 oz.cotton duck shower curtain, white.?Hemmed top edge and chrome plated nickel grommets on 6 inchcenters.? Various sizes.

9535????????? Antimicrobial10 oz. nylon-reinforced vinyl shower curtain, green.? Reinforced, flameproof, stain resistant,self-deodorizing fabric.? Hemmed edgesand aluminum grommets on 6 inch centers at top edge.? Sizes:?42, 48, and 72 (W) by 72 (H) inches.?

9537????????? Same asModel 9535:? White.

9536????????? Showercurtain hook, stainless steel spring wire clip with snap fastener.? Suitable for use with 1 inch and 1-1/4 inchshower curtain rods.

9540????????? Same asModel 9536, but includes 5 nickel plated brass rollers on each hook.

A.            Shower Curtain SC:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Material: [Nylon-reinforced vinyl, minimum 10 oz./sq. yd. (237 g/sq. m)] [0.014 inch (0.36 mm)] thick vinyl, with integralantimicrobial agent] [Cotton duck, minimum 10oz./sq. yd. (190 g/sq. m)].? Aluminum grommets on 6 inch(152 mm) centers.

a.             Color:? [White] [Green].

3.             Shower Curtain Hooks:? Stainless-steel, spring wire curtain hooks [withnickel plated brass rollers].

Folding Shower Seats:

9557????????? 1 incho.d. stainless steel tubing frame, stainless steel wall bracket, stainlesssteel retaining bracket, and molded polyethylene seat with antimicrobial agenthomogeneously distributed throughout plastic matrix.? Positive catch holds seat in up or downposition.? Static load limit:? 250 lbs.?Seat color:? Bone.

9559????????? Same asModel 9558, but seat is fabricated from teak wood slats.

956?????????? 1 incho.d. stainless steel tubing frame, stainless steel wall bracket, stainlesssteel retaining bracket, and left hand "L" shaped molded polyethyleneseat with antimicrobial agent homogeneously distributed throughout plasticmatrix.? Positive catch holds seat in upor down position.? Static loadlimit:? 250 lbs.? Seat color:?Bone.? 9561:? Right hand seat.

956-30?????? Same asModel 956, but is fabricated from stainless steel.? 9561-30:?Right hand seat.

9567????????? Same asModel 956, but is fabricated from teak wood slats.? 9568:?Right hand seat.

9569????????? 1 incho.d. stainless steel tubing frame, stainless steel wall bracket, stainlesssteel retaining bracket, and melamine laminated seat over 1/2 inch solidphenolic core.? Seat is field convertibleto left or right hand "L" shaped configuration.? Positive catch holds seat in up or downposition.? Static load limit:? 250 lbs.?Seat color:? Matte white standard,or as selected from manufacturer's standard colors.

9562????????? Same asModel 9569 but rectangular configuration.

957?????????? 1-1/4 incho.d. stainless steel tubing frame with 1 inch o.d. cross members. free standingwith stainless steel wall bracket, and melamine laminated seat over 1/2 inchsolid phenolic core.? Left hand"L" shaped seat.? Positivecatch holds seat in up or down position.?Static load limit:? 900 lbs.? Seat color:?Matte white standard, or as selected from manufacturer's standardcolors.? 9571:? Right hand seat.

958?????????? 1-1/4 incho.d. stainless steel tubing frame with 1 inch o.d. cross members, free standingwith stainless steel wall brackets, and melamine laminated seat over 1/2 inchsolid phenolic core.? Rectangular shapedseat.? Positive catch holds seat in up ordown position.? Static load limit:? 900 lbs.?Seat color:? Matte white standard,or as selected from manufacturer's standard colors.

B.             Folding Shower Seat FSS:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Configuration:?[Rectangular] [Lefthand][Righthand][Fieldconvertible][Handas indicated]seat.

3.             Color:? [Manufacturer'sstandard][Asselected from manufacturer's full range].

4.             Seat:? [Moldedpolyethylene.][Laminatedphenolic.][Teak.] [Polymericcomposite.]

5.             Frame and Mounting Mechanism:? Stainless steel.

6.             Static Load Capacity:? [250 lb.(113 kg)][900 lb (408 kg)].

Soap Dishes:

900?????????? Surfacemounted, 7-gauge stainless steel, satin finish, formed as a single piece.? Includes three drain holes.

9001????????? Same asModel 900, but 18 gauge stainless steel with gussets.

901?????????? Surfacemounted, cast brass, nickel plated and highly polished chrome finish.? -60 With 3 drain holes.

9014????????? Surfacemounted, stainless steel with satin finish.?Includes four drain holes.?-63:? Without drain holes.

9015????????? Same asModel 9014, but with bright polished stainless steel.? -63 Without drain holes.

921?????????? Surfacemounted, die cast Zamac, copper nickel plated with highly polished chromefinish.? Includes cadmium plated steelwall plate.? -60 With drain holes.

9352????????? Recessmounted, bright polished stainless steel.?Includes removable soap tray.

9353????????? Same asModel 9352, but satin stainless steel finish.

936?????????? Recessmounted, polished chrome plated brass.?Includes removable soap tray.

9362????????? Same asModel 9352, and includes matching towel bar.

9363????????? Same asModel 9353, and includes matching towel bar.

940?????????? Recessmounted, satin finish stainless steel, integral towel bar.? Incudes mortar lugs.

9401????????? Same asmodel 940, but without towel bar.

9402????????? Same asModel 940, but with wall clamp in place of mortar lugs.

9403????????? Same asModel 9401, but with wall clamp in place of mortar lugs.

A.            Soap Dish SD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Mounting:?[Surface.] [Recessed.]

3.             [Recessed Mounting Fittings:? [Mortar lugs.] [Wall clamp.]]

Specifier:? If required,retain descriptive characteristics below and edit to match specified model.

4.             Material:?[Stainlesssteel.][Castbrass.][Diecast Zamac.]

5.             Finish:? [Stainlesssteel, satin.][Polishedchrome.]

6.             Drain Holes:?[With.] [Without.]

7.             [Matching] [Integral] Towel Bar:?[Included.] [Notincluded.]

Robe Hooks:

911?????????? Surfacemounted clothes hook, chrome plated brass.?Single hook.

9111????????? Surfacemounted clothes hook, satin finish stainless steel.? Single hook.

9114????????? Surfacemounted, satin finish stainless steel.?Single hook.

9115????????? Surfacemounted, bright polished stainless steel.?Single hook.

9118????????? Surfacemounted robe hook, chrome plated brass.?Single hook.

9119????????? Surfacemounted clothes hook with concealed mounting hardware, chrome plated brass withchrome plated steel cover plate.? Singlehook.

912?????????? Surfacemounted clothes hook, chrome plated brass.?Double hook.

9124????????? Surfacemounted, satin finish stainless steel.?Double hook.

9125????????? Surfacemounted, bright polished stainless steel.?Double hook.

9134????????? Surfacemounted hat and coat hook, satin finish stainless steel.? Single hook for each.

9135????????? Surfacemounted hat and coat hook, bright polished stainless steel.? Single hook for each.

914?????????? Surfacemounted clothes hook, chrome plated brass.?Double hook.

915?????????? Surfacemounted clothes hook and door bumper, chrome plated brass.? Single hook.

9183????????? BoutiqueSeries:? Surface mounted, die cast Zamac,chrome plated.? Includes zinc platedsteel wall plate. Double hook.

931?????????? Surfacemounted, die cast Zamac, copper nickel plated with highly polished chromefinish.? Includes cadmium plated steelwall plate.? Single hook.

9311????????? Surfacemounted towel hook, die cast Zamac, copper nickel plated with highly polishedchrome finish.? Long projection (5-1/8inches).? Includes cadmium plated steelwall plate.? Single hook.

932?????????? Surfacemounted, die cast Zamac, copper nickel plated with highly polished chromefinish.? Includes cadmium plated steelwall plate.? Double hook.

A.            Robe Hook RH:

1.             Basis of Design:?Bradley Corp., [ ___ ].

2.             Description:?[Single] [Double]-prong unit, surface mounted.

3.             Material and Finish:? [Chrome plated Zamac, with zinc plated steelwall plate] [Brightpolished stainless steel] [Satin stainless steel] [Chrome-plated brass].

2.5                   CHILDCARE ACCESSORIES

A.             Diaper-Changing Stations DCS:

1.             Basis of Design:?Bradley Corp., Model ?961 Series.

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

2.             Description:?ADA/ABA-compliant horizontal unit with fold-down platform from storedposition, with safety strap.

3.             Capacity:?Not less than 100 lb (45.4 kg)per ASTM F 2285.

4.             Mounting:?Surface.

5.             Operation:?Concealed pneumatic gas shock.

6.             Material and Finish:? Molded high-density polyethylene, with full-lengthsteel hinge pin.

7.             Accessories:?Integral liner dispenser and bag hook.

8.             Color:? Asselected by Architect from manufacturer's standard colors.

B.             Diaper-Changing Stations DCS:

1.             Basis of Design:?Bradley Corp., Model ?962 Series.

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

2.             Description:?ADA/ABA-compliant horizontal unit with fold-down platform from storedposition, with cam buckle safety strap.

3.             Capacity:?Not less than 250 lb (113.4 kg)per ASTM F 2285.

4.             Mounting:?[Surface] [Recessed].

5.             Operation:?Concealed pneumatic gas shock.

6.             Material and Finish:? Stainless steel exterior, brushed finish,with molded high-density polyethylene body and full-length steel hinge pin.

7.             Accessories:?Integral liner dispenser and bag hook.

8.             Color:? Asselected by Architect from manufacturer's standard colors.

2.6                   CUSTODIAL ACCESSORIES

A.             Corner Guard CG:

1.             Basis of Design:?Bradley Corp., Model 991.

2.             Description: Self adhesive angle.

3.             Materials:?Stainless steel.

4.             Mounting:?Surface mounted, peel and stick adhesive tape.

5.             Dimensions:?3-1/2 by 3-1/2 by 40 inches (89 by89 by 1016 mm).

Bradley Decorative Wall Trim:?Bradley Wave accent wall trim coordinates with Frequency fixtures.

B.             Wall Trim WT:

1.             Basis of Design:?Bradley Corp., Model 992WFrequency Wall Trim.

2.             Application:?[Whereindicated].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Description: Self adhesive strips with wavepattern.

4.             Materials:?Lexan.

5.             Mounting:?Surface mounted, peel and stick adhesive tape.

6.             Dimensions: ?[4 by 42 inches (102 by 1067 mm).] [8 by 42 inches (204 by 1067 mm).]

Bradley Utility Shelves:

9933????????? Stainlesssteel wall-mounted shelf unit with rubber cam mop/broom holders for custodialoperations.? 4 hooks/3 holders.??? 9934:?5 hooks/4 holders.

C.             Utility Shelf US:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Oneunit per janitor closet] [Where indicated] [insert location description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Description: ?Metal plate with attached hooks, mop-broomhandle holding mechanisms, and 8 inch (203mm) deep shelf across full width of unit.

4.             Materials:?Stainless steel.? Mop-broom handleholders include rubber cams.

5.             Mounting:?Surface mounted.

6.             Quantity of Hooks/Mop-Broom Holders:? [4/3] [5/4].

7.             Size:? [14 by 34 inch (356 by 864 mm)] [14 by 44 inch (356 by 1118 mm)].

Bradley Mop and BroomHolders:

9953????????? Stainlesssteel wall-mounted unit with rubber cam mop/broom holders for custodialoperations.? 3 mop holders, 24 incheslong.? 9954:? 4 mop holders, 36 inches long.? 9955:? 5mop holders, 48 inches.

D.             Mop and Broom Holder MOP:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Oneunit per janitor closet] [Where indicated] [insert location description].

Specifier:? If required, retain descriptivecharacteristics below and edit to match specified model.

3.             Description: ?Metal plate with attached mop-broom handleholding mechanisms.

4.             Materials:?Stainless steel.? Mop-broom handleholders include rubber cams.

5.             Finish:? Satinstainless steel.

6.             Mounting:?Surface mounted.

7.             Length:? [24 inches (610 mm).] [36 inches(915 mm).] [48 inches (1220 mm).]

8.             Quantity of Hooks/Mop-Broom Holders:? [3] [4] [5].

2.7                   FABRICATION

A.             General:?Fabricate units with tight seams and joints, and exposed edgesrolled.? Hang doors and access panelswith full-length, continuous hinges.?Equip units for concealed anchorage and with corrosion-resistant backingplates.

B.             Keys:?Provide universal keys for internal access to accessories for servicing andresupplying.? Provide minimum of six keysto Owner's representative.

PART 3 - EXECUTION

3.1                   INSTALLATION

A.             Assemble fixtures and associated fittings andtrim in accordance with manufacturer's instructions.

B.             Install supports attached to building structurefor equipment requiring supports.

C.             Grab Bars:?Install grab bars to withstand downward force of not less than 250 lbf (1112 N) perASTM F 446.

D.             Install equipment level, plumb, and firmly inplace in accordance with manufacturer's rough-in drawings.

3.2                   CLEANING AND PROTECTION

A.             Repair or replace defective work, includingdamaged equipment and components.

B.             Clean unit surfaces, and leave in ready-to-usecondition.

C.             Turn over keys, tools, maintenance instructions,and maintenance stock to Owner.

3.3                   TESTING AND ADJUSTING

A.             Test each piece of equipment provided withmoving parts to assure proper operation, freedom of movement, and alignment.? Install new batteries in battery-powereditems.

B.             Repair or replace malfunctioning equipment, orequipment with parts that bind or are misaligned.

END OF SECTION