BRADLEY DETENTION TOILET ACCESSORIES

This Bradley guide specification is useful in specifying toiletaccessories for detention projects.? Itincludes an array of detention accessories for use in secure areas.? For a complete project including toiletfacilities in non-secure areas, this section can be used in conjunction withBradley's Commercial Toilet Accessories section.? This section is editable using commonspecification software editing tools, including selection of IP and SI units.

Bradley is a trusted leader in the toilet accessory market, offeringhigh quality accessories at a competitive price, fast delivery, and excellentcustomer service. ?Bradley offers a fullline of washroom accessories for every application. From high-end officebuildings to high-security prisons, Bradley has a product to meet any washroomaccessory need.

Custom products are another Bradley specialty, from unusualconfigurations of grab bars, to modified sizes, Bradley will work with you toprovide the products necessary to complete your project. ?Bradley Corporation serves a diverse customerbase ranging from local business facilities to international corporations likeWal-Mart, General Motors, U.S. Postal Service, and AMC Theaters Corporation.

Architects, engineers, and specifierslook to Bradley Corporation for innovation in design and leadership in thedevelopment of environmentally conscious products.? Bradley Corporation, a member of the U.S.Green Building Council, the Wisconsin Green Building Alliance, has severalproducts earning certification by Greenguard Environmental Institute, andGreenguard Children and Schools program.

Bradley eases the specifying process with a seasoned customerservice staff and a range of helpful information tools on an advanced website.? Bradley's Universal Design Guide ? Washrooms& Showers is available on the Bradley website as a helpful resource whenplanning commercial toilet room layout.

Bradley premium quality commercial products appear in the followingCSI MasterFormat 2010? Sections:

 

Section 10 21 13 ? TOILET COMPARTMENTS (Mills?Metal, Plastic-laminate, Phenolic, and Plastic units)

Section 10 28 13.13 ? COMMERCIAL TOILETACCESSORIES (Institutional and commercial accessories)

Section 10 28 13.19 ? HEALTHCARE TOILETACCESSORIES (Patient care accessories)

Section 10 28 13.21 ? WARM AIR DRYERS (Aerix?hand dryers)

Section 10 28 13.63 ? DETENTION TOILETACCESSORIES

Section 10 28 16 ? BATH ACCESSORIES(Hospitality and commercial bath accessories)

Section 10 51 26 ? PLASTIC LOCKERS (Lenox?Plastic Lockers)

Section 22 11 19 ? DOMESTIC WATER PIPINGSPECIALTIES (Thermostatic mixing valves)

Section 22 42 16.01 ? COMMERCIAL LAVATORIES ANDFAUCETS (Express? and Frequency? Single and multi-stationlavatories)

Section 22 42 16.02 ? COMMERCIAL LAVATORIES ANDFAUCETS (Advocate? lavatories)

Section 22 42 16.03 ? COMMERCIAL LAVATORIES ANDFAUCETS (Verge? lavatories)

Section 22 42 16.04 ? COMMERCIAL LAVATORIES ANDFAUCETS (Lav Decks? lavatories)

Section 22 42 16.11 ? COMMERCIAL SINKS ANDFAUCETS

Section 22 42 23 ? COMMERCIAL SHOWERS ANDSHOWER VALVES

Section 22 42 33 ? WASHFOUNTAINS (Sentry?,BradMate?, and Classic washfountains)

Section 22 43 00 ? HEALTHCARE PLUMBING FIXTURES(Patient care lavatory units)

Section 22 45 00 ? EMERGENCY PLUMBING FIXTURES(Halo? Emergency eyewash fixtures and showers)

Section 22 46 00 ? SECURITY PLUMBING FIXTURES

Contact Bradley Corporation, Menomonee Falls, WI53051, Phone: 800-BRADLEY (800)272-3539,
Fax:? (262)251-5817, or visit the Bradleyweb site www.bradleycorp.com.

 

Bradley Corporation is anAIA/CES registered provider currently offering five programs earning one (1)HS&W Learning Unit each; several qualify for sustainable design (SD) credit.? All active AIA members must successfullycomplete 18 learning unit (LU) hours each year.

 

GREENGUARD Certification ProgramSM is a servicemark of GREENGUARD Environmental Institute.

Mills?, Aerix?, Lenox?,Express?, Frequency?, and Advocate? areregistered trademarks of Bradley Corporation.

Verge?, Lav Decks?, Sentry?, BradMate?, and Halo? aretrademarks of Bradley Corporation.


SECTION 10 28 13.63
DETENTION TOILET ACCESSORIES

PART 1 - GENERAL

1.1                   SECTION INCLUDES

Specifier:? Edit list belowto correspond to project.

A.             Toilet tissue holders.

B.             Grab bars.

C.             Shelves.

D.             Stainless-steel mirrors.

E.             Shower accessories.

1.2                   RELATED SECTIONS

Specifier:? If retainingthis optional article, delete any references below that do not apply to thisproject.

1.             Division 01 Section "Special Project Proceduresfor Detention Facilities" for general requirements for detention work.

2.             Division 10 Section "Commercial ToiletAccessories" for toilet and shower accessories in non-secure portions ofdetention facilities.

1.3                   REFERENCES

Specifier:? If retainingthis optional article, edit to reflect standards cited in the completedsection.

A.             American National Standards Institute (ANSI):

1.             ANSI A 117.1 - Accessible and Usable Buildingsand Facilities.

B.             ASTM International (ASTM):

1.             ASTM A 153/A 153M - Standard Specification forZinc Coating (Hot-Dip) on Iron and Steel Hardware.

2.             ASTM A 653/A 653M - StandardSpecification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-IronAlloy-Coated (Galvannealed) by the Hot-Dip Process.

3.             ASTM A 666 - Standard Specification for Annealedor Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar.

4.             ASTM A 1008/A 1008M- StandardSpecification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-StrengthLow-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened,and Bake Hardenable.

5.             ASTM B 456 - Standard Specificationfor Electrodeposited Coatings of Copper plus Nickel plus Chromium and Nickel plusChromium.

6.             ASTM E 488 - Standard Test Methods for Strengthof Anchors in Concrete and Masonry Elements.

7.             ASTM F 446 - Standard Consumer SafetySpecification for Grab Bars and Accessories Installed in the Bathing Area.

C.             American Welding Society (AWS):

1.             AWS D1.1/D1.1M - Structural Welding Code ?Steel.

2.             AWS D1.3 - Structural Welding Code - SheetSteel.

3.             AWS D1.6 - Structural Welding Code - StainlessSteel.

1.4                   ACTION SUBMITTALS

A.             Product Data:?For each product:

1.             Manufacturer's product data sheets indicatingoperating characteristics, materials and finishes.? Mark each sheet with product designation.

2.             Mounting requirements and rough-in dimensions.

B.             Samples:?For each type of detention toilet accessory.

1.5                   INFORMATION SUBMITTALS

A.             Sample warranty.

B.             Operation, care, and cleaning instructions.

1.6                   CLOSEOUT SUBMITTALS

A.             Operation and Maintenance data.

1.7                   MAINTENANCE MATERIAL SUBMITTALS

A.             Security Fasteners:? Furnish not less than 1 box of each typeand size of security fastener.

B.             Tools:?Provide two sets of each type of tool required for installation ofdetention toilet accessories.

1.8                   QUALITY ASSURANCE

A.             Source Limitations:? For products listed, obtain products fromsingle source from single manufacturer.

B.             Manufacturer Qualifications:? Approved manufacturer listed in this section,with minimum [5]years experience in the manufacture of product types. Manufacturers seekingapproval must submit the following:

1.             Product data, including test data from qualifiedindependent testing agency indicating compliance with requirements.

2.             Samples of each product specified.

3.             List of successful installations of similarproducts available for evaluation by Architect.

4.             Submit substitution request in accordance with Instructionsto Bidders and Division 01 General Requirements.

PART 2 - PRODUCTS

2.1                   MANUFACTURERS

A.             Basis-of-Design Products:? Subject to compliance with requirements,provide commercial toilet accessories manufactured by Bradley Corporation,Menomonee Falls, WI 53051, (800) 272‑3539, fax: (262) 251‑5817;Email info@BradleyCorp.com;? Website: www.bradleycorp.com.

Specifier:? Retain one ofthree paragraphs below based upon Project requirements.

1.             Submit comparable products of one of thefollowing for approval by Architect:

a.             [Specifier:? Insert name of manufacturer ofcomparable product.]

2.             Submit requests for substitution in accordancewith Instructions to Bidders and Division 01 General Requirements.

3.             Provide specified product; Owner will notconsider substitution requests.

2.2                   MATERIALS

A.             Stainless Steel:?ASTM A 666 Type 304 (18-8); satin finish exposed surfaces unlessotherwise indicated.

B.             Steel Sheet:?ASTM A 1008/A 1008M, Designation CS, manufacturer?sstandard thickness.

C.             Galvanized-Steel Sheet:? ASTM A 653/A 653M, with G60hot-dip zinc coating, manufacturer?s standard thickness.

D.             Galvanized-Steel Mounting Devices:? ASTM A 153/A 153M, hot-dipgalvanized after fabrication.

E.             Security Fasteners:? Exposed:?Screws, bolts, and other devices of same material as accessory unit and PinnedTorx-Plus head.

F.             Concealed Bolts:?ASTM A 307, Grade A, hot dipped galvanized steel.

G.             Cast-in-Place Anchors in Concrete:? Corrosion-resistant, supporting four timesimposed load per ASTM E 488, malleable iron or cast steel, hot-dip galvanizedper ASTM A 153/ A 153M.

H.             Welding Rods and Bare Electrodes:? Select per AWS.

I.               Security Sealant:? Type recommended by manufacturer forapplication.

2.3                   DETENTION TOILET TISSUE HOLDERS

Bradley Detention Toilet Tissue Holders, Front-Mounted:

SA10???????? Singleroll, front-mounted holder for 5 inch diameter roll.? L-shaped tube, 18 ga. stainless steel withwelded end cap and 11 ga. wall flange, satin finish.? Includes Torx-head screws for installationinto wall anchors.?

SA12???????? Singleroll, front-mounted recessed holder, satin finish 16 ga. stainless steel, with14 ga. square mounting flange welded to holder.?Includes Torx-head screws for installation into wall anchors.

SA14???????? Sheettissue holder, front-mounted, satin finish, 14 ga. stainless steel.? Includes Torx-head screws for installationinto wall anchors.

A.             Toilet Tissue Roll Dispenser, Front-mounted TTHS:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

3.             Capacity:?[Singleroll][Sheettissue]holder.

4.             Finish and Base Material:? Satin-finish stainless steel.

5.             Tissue Access:?Exposed.

6.             Delivery:?Non-controlled.

7.             Mounting: ?Front mounted.

Bradley Detention Toilet Tissue Holders, Chase-Mounted:

SA09???????? Singleroll, chase-mounted, L-shaped holder for 5 inch diameter roll.? Satin finish 18 ga stainless steel tubing and11 ga. stainless steel flange.? Includesintegral welded nuts for studs inserted from chase side of wall.

SA11???????? Singleroll, chase-mounted holder with beveled rim, satin finish 16 ga. stainlesssteel.? Back of holder has welded nuts toreceive threaded studs mounted on 11 ga. galvanized steel backplate, from chaseside of wall.

SA13???????? Sheettissue holder, chase-mounted, satin finish 14 ga. stainless steel.? Back of holder has welded nuts to receivethreaded studs mounted on 11 ga. galvanized steel backplate, from chase side ofwall.

B.             Toilet Tissue Roll Dispenser, Chase-mounted TTHS:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

3.             Capacity:?[Singleroll][Sheettissue]holder.

4.             Finish and Base Material:? Satin-finish stainless steel.

5.             Tissue Access:?Exposed.

6.             Delivery:?Non-controlled.

7.             Mounting: ?Chase mounted.

Bradley Detention Toilet Tissue Holders, Partition-Mounted:

SA15???????? Sheettissue holder, partition mounted, satin finish 14 ga. stainless steel withchrome plated brass thru-bolts for mounting to surface of partitions.

C.             Toilet Tissue Roll Dispenser, Partition-mounted TTHS:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

3.             Capacity:?[Singleroll][Sheettissue]holder.

4.             Finish and Base Material:? Satin-finish stainless steel.

5.             Tissue Access:?Exposed.

6.             Delivery:?Non-controlled.

7.             Mounting: ?Partition mounted.

2.4                   DETENTION GRAB BARS

Bradley Grab Bars:

SA70???????? 1-1/2 incho.d.,? 18 ga satin finish stainless steeltubing.? Includes 11 ga., 3-1/8 inchdiameter stainless steel flange and Torx-head screws for installation into wallanchors. Closure plate 11 ga stainless steel.

A.             Detention Grab Bar, Fixed [DGB18] [DGB24] [DGB36] [DGB42] [DGB60] :

1.             Basis of Design, Fixed Grab Bar:? BradleyCorp., Model SA70 1-1/2 inch (38 mm) diameter.

2.             Application:?[Whereindicated][insertlocation description].

3.             Mounting: 3-1/8 inch (79 mm) diameter, 11 ga./0.125 inch (3.2 mm) stainless steel flanges with exposed fasteners forinstallation into wall anchors.

4.             Material: Stainless steel, 18 ga./0.050inch (1.27 mm) thick.? Closure Plate:? 11 ga./0.125 inch (3.2 mm) stainless steel.

5.             Length:? Asindicated.

6.             Finish:? Satin,stainless steel, [smooth] [safety-grip] finish.

2.5                   DETENTION SHELVES

Bradley Detention Shelf:

SA47???????? Recessed,chase mounted shelf.? 16 ga. stainlesssteel, satin finish on exposed surfaces.?Interior finish:? satin glassblast.? Includes welded nuts to accept1/4-20 studs from back side of wall.? 16inches long.

SA49???????? Chasemounted shelf.? 14 ga. stainless steel,satin finish on exposed surfaces.?Includes welded nuts to accept 1/4-20 studs from back side of wall.? 16 inches long.

SA50???????? Chasemounted shelf with four toothbrush slots.?14 ga. stainless steel, satin finish on exposed surfaces.? Includes welded nuts to accept 1/4-20 studsfrom back side of wall.? 18 inches long.

SA51???????? Chasemounted book shelf with four clothes hooks.?14 ga. stainless steel, satin finish on exposed surfaces.? Includes welded nuts to accept 1/4-20 studsfrom back side of wall.? 18 inches long.

SA52???????? Frontmounted book shelf with four clothes hooks.?14 ga. stainless steel, satin finish on exposed surfaces.? Includes Torx head screws for installationwith wall anchors.? 18 inches long.

SA53???????? Chasemounted book shelf with four clothes hooks.?14 ga. stainless steel, satin finish on exposed surfaces.? Includes welded nuts to accept 1/4-20 studsfrom back side of wall.? 18 inches long.

SA54???????? Frontmounted book shelf with four clothes hooks.?14 ga. stainless steel, satin finish on exposed surfaces. ?Includes Torx head screws for installationwith wall anchors. 18 inches long.?

SA55???????? Chasemounted book shelf.? 14 ga. stainlesssteel, satin finish on exposed surfaces.?Includes welded nuts to accept 1/4-20 studs from back side of wall.? 18 inches long.

SA56???????? Frontmounted book shelf.? 14 ga. stainlesssteel, satin finish on exposed surfaces.?Includes Torx head screws for installation with wall anchors.? 18 inches long.

A.             Shelf SH:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Application:?[Whereindicated][insertlocation description].

3.             Mounting:?[Chase] [Front] mountedon wall or partition [, fold-down].

4.             Material:?Shelf Assembly:? [16 ga./0.0625 inch (1.6 mm)] [14 ga./0.0781 inch (2.0 mm)] stainlesssteel.? Backplate: ?11 ga./0.1250 inch (3.2 mm) stainless steel, with welded nuts for 1/4-20 studsinserted from back side of wall.

5.             Length:? [16 inches (406 mm)] [18 inches (457 mm)] [36 inches (914 mm)] [42 inches (1067 mm)] [60 inches (1524 mm)] [As indicated].

6.             Toothbrush Slots:? Four.

7.             Hardware:?[Torxhead screws.][1/4-20 studs.]

8.             Finish:? Satinstainless steel.

2.6                   DETENTION MIRRORS

Mirror Units:

SA01???????? Chasemounted 12 by 16 inch mirror, 14 ga stainless steel frame with seamlessconstruction, with satin finish on exposed surfaces.? Frame includes welded nuts to accept 1/4-20studs.? Mirror held to frame byfiberboard backing.

???????????????? SA01-1:? Mirror is 20 ga stainless steel polished toNo. 8 architectural finish.? Stretcherleveled. ?Very bright finish, slightpolish grain.

???????????????? SA01-2:? Mirror is 20 ga stainless steel, brightannealed.? Stretcher leveled.? Surface is bright and smooth, withmirror-like finish.

???????????????? SA01-5:? Plexiglas? mirror is 1/4 inchthick.? Surface will scratch.? Retain paragraph in Part 3 regarding abrasivecleaners.

SA03???????? FrontMounted 12 by 16 inch mirror, 14 ga stainless steel frame with seamlessconstruction, with satin finish on exposed surfaces.? Includes 1/4-20 Torx-head screws forinstallation into wall anchors.? Mirrorheld to frame by fiberboard backing.

???????????????? SA03-1:? Mirror is 20 ga stainless steel polished toNo. 8 architectural finish.? Stretcherleveled.? Very bright finish, slightpolish grain.

???????????????? SA03-2:? Mirror is 20 ga stainless steel, brightannealed.? Stretcher leveled.? Surface is bright and smooth, withmirror-like finish.

???????????????? SA03-5:? Plexiglas mirror is 1/4 inch thick.? Surface will scratch.? Retain paragraph in Part 3 regarding abrasivecleaners.

SA05???????? 11-1/4 by17-1/4 mirror is 20 ga stainless steel polished to No. 8 architecturalfinish.? Stretcher leveled.? Very bright finish, slight polish grain.? Frame:?22 ga stainless steel, satin finish.?Includes Torx-head screws for installation into wal anchors.

SA06???????? Same asModel SA05, but 10-1/16 by 11-9/16 inches.

A.             Framed Mirror Unit MG:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Size and Application:? [12 by 16 inches (305 by 406 mm)] [11 by 17 inches (286 by 438 mm)][10-1/16 by 11-9/16 inches (256 by 294 mm)],[ateach wash station] [where indicated] [insert location description].

3.             Frame:? 14 ga./0.0781 inch (1.98 mm) stainless-steel,seamless, with installation by [1/4-20 stud anchored into wall] [1/4-20Torx-head screws][insertlocation description].

4.             Mirror:?

Specifier:? Select one of 3reflective surface material subparagraphs.

a.             Reflective Surface:? No. 8 polished 20 ga/0.0375inch (0.95 mm) stainless steel.

b.             Reflective Surface:? Bright annealed 20 ga./0.0375inch (0.95 mm) stainless steel.

c.             Reflective Surface:? 1/4 inch(6 mm) thick plexiglass.

B.             Toothbrush Holder TBH:

Bradley Toothbrush Holder:

SA25???????? Chasemounted, 7 ga. stainless steel, satin finish, formed from single piece ofmetal, with 4 toothbrush holes.? Back oftoothbrush holder has welded anchor nuts for mounting screws installed fromback side of wall.

SA26???????? Same asModel SA25, but front mounted, with Torx-head screws for installation into wallanchors.

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Material:?7 ga./0.187 inch (4.77 mm)stainless steel.

3.             Finish:?Stainless steel, satin.

4.             Toothbrush Holes:? Four.

2.7                   DETENTION SHOWER ACCESSORIES

A.             Folding Shower Seat FSS:

1.             Basis of Design:?Bradley Corp., Model SA65.

2.             Material:?Housing:? 16 ga./0.0625inch (1.6 mm) stainless steel with heavy channelswelded to back of unit.? Seat:? Fold down, stainless steel.

3.             Static Load Capacity:? 750 lb.(1650 kg).

Soap Dishes:

SA16???????? Chasemounted, 18 ga. stainless steel, satin finish, formed as a single piece.? Back of soap dish has welded anchor nuts formounting screws installed from back side of wall.

SA21???????? Chasemounted, 7 ga. stainless steel, satin finish, formed from single piece ofmetal, with 3 drain holes.? Back of soapdish has welded anchor nuts for mounting screws installed from back side ofwall.

SA22???????? Same asmodel SA21, but front mounted, with Torx-head screws for installation into wallanchors.

B.             Soap Dish SD:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Material and Finish:? [18 ga./0.050 inch (1.27 mm)] [7 ga./0.187 inch (4.77 mm)] satin stainless steel.

3.             Drain Holes:?[With] [Without].

Bradley Towel Hook:

SA30???????? Chasemounted, 14 ga. stainless steel, satin finish, formed from single piece ofmetal, with 1 towel hook.? Back of mountingplate has welded anchor nuts for mounting screws installed from back side ofwall.

SA31???????? Same asModel SA25, but front mounted, with Torx-head screws for installation into wallanchors.

SA32???????? Same asModel SA30, but with 4 towel hooks.

SA33 ??????? Same asModel SA31, but with 4 towel hooks.

SA35???????? Chasemounted, 14 ga. stainless steel, satin finish.?Includes safety hook ball joint that releases when more than 20 lb. offorce is applied. Back of mounting plate has welded anchor nuts for mountingscrews installed from back side of wall.

SA36???????? Same asModel SA35, but front mounted, with Torx head screws for installation into wallanchors.

SA37???????? Chase mounted,11 ga. stainless steel bracket with 7 ga. stainless steel hook, satinfinish.? Includes safety releasemechanism that releases when more than 20 lb. of force is applied.

SA38???????? Same asModel SA37, but 4 clothes hooks.

SA39???????? Same asSA38, front mounted with Torx head screws.

SA41???????? Same asSA36, but 4 towel hooks.

C.             Towel Hook TH:

1.             Basis of Design:?Bradley Corp., Model [ ___ ].

2.             Material and Finish:? [7 ga./0.187 inch (4.77 mm)] [14 ga./0.078 inch (1.98 mm)] satin stainless-steel, seamless.

3.             Mounting:?[1/4-20 stud anchored into wall] [1/4-20 Torx-head screws] [insert location description].

4.             Towel Hooks:?[One.] [Four.]

5.             Breakaway Towel Hook:? [Ball-] [Hook-] type.

6.             Breakaway Force:?20 lb (44 kg).

2.8                   FABRICATION

A.             General:?Fabricate units with tight seams and joints, with edges and corners freeof sharp edges.? Remove burrs.? Hem edges of sheet metal minimum 1/2 inch (12mm) on unexposed side.? Minimize joints;form connections with hairline joints in inconspicuous locations.

B.             Equip units for concealed anchorage whereindicated, utilizing corrosion-resistant backing plates.? Fabricate anchors to secure detention toiletaccessories rigidly in place and to resist anticipated loads.

PART 3 - EXECUTION

3.1                   INSTALLATION

A.             Assemble fixtures and associated fittings andtrim in accordance with manufacturer's instructions.

B.             Install supports attached to building structurefor equipment requiring supports.

C.             Grab Bars:?Install grab bars to withstand downward load of not less than 250 lbf (1112 N) perASTM F 446.

D.             Apply security sealant in a continuous ribbonaround perimeter of back of surface-mounted detention toilet accessories.

E.             Install detention toilet accessories usingsecurity fasteners recommended by manufacturer for application.

F.             Install equipment level, plumb, and firmly inplace in accordance with manufacturer's rough-in drawings.

3.2                   CLEANING AND PROTECTION

A.             Repair or replace defective work, includingdamaged equipment and components.

B.             Clean unit surfaces, and leave in ready-to-usecondition.

C.             Clean mirrors with products recommended bymirror manufacturer.

1.             Do not clean Plexiglas mirrors with abrasivecleaning products.

D.             Turn over keys, tools, maintenance instructions,and maintenance stock to Owner.

3.3                   TESTING AND ADJUSTING

A.             Test each piece of equipment provided withmoving parts to assure proper operation, freedom of movement, and alignment.

B.             Repair or replace malfunctioning equipment, orequipment with parts that bind or are misaligned.

END OF SECTION