SECTION 102816 - BATH ACCESSORIES

BRADLEY BATH ACCESSORIES FOR COMMERCIAL ANDHOSPITALITY PROJECTS

This Bradley guide specification is useful in specifying toiletand bath accessories for commercial and hospitality projects, including hotels,restaurants, and office buildings.? Itincludes Bradley's Boutique Collectionand Hospitality 900 Series accessories, along with an array of accessoriesto complete your project specification.?This section is editable using common specification software editingtools, including selection of IP and SI units.

Bradley is a trusted leader in the commercial washroom equipmentmarket, offering high quality accessories at a competitive price, fastdelivery, and excellent customer service. ?Bradley offers a full line of washroomaccessories for every application. From high-end office buildings tohigh-security prisons, Bradley has a product to meet any washroom accessoryneed.

Custom products are another Bradley specialty, from unusualconfigurations of grab bars, to modified sizes, Bradley will work with you toprovide the products necessary to complete your project. ?Bradley Corporation serves a diverse customerbase ranging from local business facilities to international corporations likeWal-Mart, General Motors, U.S. Postal Service, and AMC Theaters Corporation.

Architects, engineers, and specifierslook to Bradley Corporation for innovation in design and leadership in thedevelopment of environmentally conscious products.? Bradley Corporation, a member of the U.S.Green Building Council, the Wisconsin Green Building Alliance, has numerousproducts earning certification by Greenguard^SM EnvironmentalInstitute, and Greenguard Children and Schools program.

Bradley eases the specifying process with a seasoned customerservice staff and a range of helpful information tools on an advanced website.? Bradley's Universal Design Guide ? Washrooms& Showers is available on the Bradley website as a helpful resource whenplanning commercial toilet room layout.

Bradley premium quality commercial products appear in the followingCSI MasterFormat 2010? Sections:

Section 10 21 13 ? TOILET COMPARTMENTS (Mills^?Metal, Plastic-laminate, Phenolic, and Plastic units)

Section 10 28 13.13 ? COMMERCIAL TOILETACCESSORIES (Institutional and commercial accessories)

Section 10 28 13.19 ? HEALTHCARE TOILETACCESSORIES (Patient care accessories)

Section 10 28 13.21 ? WARM AIR DRYERS (Aerix^?hand dryers)

Section 10 28 13.63 ? DETENTION TOILETACCESSORIES

Section 10 28 16 ? BATH ACCESSORIES (Hospitalityand commercial bath accessories)

Section 10 51 26 ? PLASTIC LOCKERS (Lenox^?Plastic Lockers)

Section 22 11 19 ? DOMESTIC WATER PIPINGSPECIALTIES (Thermostatic mixing valves)

Section 22 42 16.01 ? COMMERCIAL LAVATORIES ANDFAUCETS (Express^? and Frequency^? Single and multi-stationlavatories)

Section 22 42 16.02 ? COMMERCIAL LAVATORIES ANDFAUCETS (Advocate^? lavatories)

Section 22 42 16.03 ? COMMERCIAL LAVATORIES ANDFAUCETS (Verge? lavatories)

Section 22 42 16.04 ? COMMERCIAL LAVATORIES ANDFAUCETS (Lav Decks? lavatories)

Section 22 42 16.11 ? COMMERCIAL SINKS ANDFAUCETS

Section 22 42 23 ? COMMERCIAL SHOWERS ANDSHOWER VALVES

Section 22 42 33 ? WASHFOUNTAINS (Sentry?,BradMate?, and Classic washfountains)

Section 22 43 00 ? HEALTHCARE PLUMBING FIXTURES(Patient care lavatory units)

Section 22 45 00 ? EMERGENCY PLUMBING FIXTURES(Halo? Emergency eyewash fixtures and showers)

Section 22 46 00 ? SECURITY PLUMBING FIXTURES

Contact Bradley Corporation, Menomonee Falls, WI53051, Phone: 800-BRADLEY (800)272-3539,
Fax:? (262)251-5817, or visit the Bradleyweb site www.bradleycorp.com.

Bradley Corporation is anAIA/CES registered provider currently offering five programs earning one (1)HS&W Learning Unit each; several qualify for sustainable design (SD)credit.? All active AIA members mustsuccessfully complete 18 learning unit (LU) hours each year.

GREENGUARD Certification Program^SM is a servicemark of GREENGUARD Environmental Institute.?

Mills^?, Aerix^?, Lenox^?,Express^?, Frequency^?, and Advocate^? are registeredtrademarks of Bradley Corporation.?

Verge?, Lav Decks?, Sentry?, BradMate?, and Halo? aretrademarks of Bradley Corporation.

SECTION 10 28 16
BATH ACCESSORIES

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes

1. Commercial and hospitality bathroom accessories.

1.2 RELATED SECTIONS

Specifier:? If retainingthis optional article, delete any references below that do not apply to thisproject.

1. Division 08 Section "Mirrors" for monolithicglass mirrors.

2. Division 10 Section "Commercial ToiletAccessories" for toilet accessories specific to commercial andinstitutional public toilet room facilities.

3. Division 10 Section "Healthcare ToiletAccessories" for toilet accessories specific to healthcare facilitypatient treatment areas.

4. Division 10 Section "Warm Air Dryers"for hand dryers.

1.3 REFERENCES

Specifier:? If retainingthis optional article, edit to reflect standards cited in the completedsection.

A. American National Standards Institute (ANSI):

1. ANSI A 117.1 - Accessible and Usable Buildingsand Facilities.

B. ASTM International (ASTM):

1. ASTM A 653/A 653M - StandardSpecification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-IronAlloy-Coated (Galvannealed) by the Hot-Dip Process.

2. ASTM A 666 - Standard Specification for Annealedor Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar.

3. ASTM A 1008/A 1008M- StandardSpecification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-StrengthLow-Alloy, High-Strength Low-Alloy with Improved Formability, SolutionHardened, and Bake Hardenable.

4. ASTM B 456 - Standard Specificationfor Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and NickelPlus Chromium.

5. ASTM C 1503 - Standard Specificationfor Silvered Flat Glass Mirror.

6. ASTM F 446 - Standard Consumer SafetySpecification for Grab Bars and Accessories Installed in the Bathing Area.

C. US Federal Government:

1. U.S. Architectural & Transportation BarriersCompliance Board. Americans with Disability Act (ADA) and ArchitecturalBarriers Act (ABA) Accessibility Guidelines for Buildings and Facilities.

1.4 ACTION SUBMITTALS

A. Product Data:?For each product:

1. Manufacturer's product data sheets indicatingoperating characteristics, materials and finishes.? Mark each sheet with product designation.

2. Mounting requirements and rough-in dimensions.

B. LEED Submittals:

1. Product data for Credit MR 4:? Indicate percentages by weight ofpostconsumer and preconsumer recycled content, and product cost.

Specifier:?Retain subparagraph below when applicable to project.? Below applies to accessories containingmelamine components.

2. Laboratory Test Reports for Credit IEQ 4:? For accessory components made from compositematerials:? Indicate compliance withtesting and product requirements of the California Department of HealthServices ""Standard Practice for the Testing of Volatile OrganicEmissions from Various Sources Using Small-Scale Environmental Chambers."

1.5 INFORMATION SUBMITTALS

A. Sample warranty.

B. Operation, care and cleaning instructions.

1.6 MAINTENANCE SUBMITTALS

A. Furnish indicated spare parts that are packagedwith identifying labels listing associated products.

B. Operation and Maintenance data.

1.7 QUALITY ASSURANCE

A. Source Limitations:? For products listed together in the samePart 2 articles, obtain products from single source from singlemanufacturer.

B. Manufacturer Qualifications:? Approved manufacturer listed in this section,with minimum [5]years experience in the manufacture of product types. Manufacturers seekingapproval must submit the following:

1. Product data, including test data from qualifiedindependent testing agency indicating compliance with requirements.

2. Samples of each component of product specified.

3. List of successful installations of similarproducts available for evaluation by Architect.

4. Submit substitution request not less than 15days prior to bid date.

Specifier: Bradley product information includes detailedinformation regarding requirements of ADA, ICC A117.1, and Texas AccessibilityStandards.

C. Accessibility Requirements: Comply withrequirements of ADA/ABA and with requirements of authorities havingjurisdiction.

1.8 WARRANTY

A. Special Mirror Warranty:? Manufacturer's standard form in whichmanufacturer agrees to replace mirrors that develop visible silver spoilagedefects and that fail in materials or workmanship within specified warrantyperiod.

1. Warranty Period:?15 years from date of Substantial Completion.

PART 2 - PRODUCTS

2.1 MANUFACTURERS

A. Basis-of-Design Products:? Subject to compliance with requirements,provide bath accessories manufactured by Bradley Corporation, Menomonee Falls,WI 53051, (800) 272‑3539, fax: (262) 251‑5817; Emailinfo@BradleyCorp.com;? Website: www.bradleycorp.com.

Specifier:? Retain one ofthree paragraphs below based upon Project requirements.

1. Submit comparable products of one of the followingfor approval by Architect:

a. [Specifier:? Insert name of manufacturer ofcomparable product.]

2. Submit requests for substitution in accordancewith Instructions to Bidders and Division 01 General Requirements.

3. Provide specified product; Owner will not considersubstitution requests.

2.2 MATERIALS

A. Stainless Steel:?ASTM A 666 Type 304 (18-8); satin finish exposed surfaces unlessotherwise indicated.

B. Steel Sheet:?ASTM A 1008/A 1008M, Designation CS, manufacturer?sstandard thickness.

C. Galvanized-Steel Sheet:? ASTM A 653/A 653M, with G60hot-dip zinc coating, manufacturer?s standard thickness.

D. Galvanized-Steel Mounting Devices:? ASTM A 153/A 153M, hot-dipgalvanized after fabrication.

E. Fasteners:

1. Exposed:?Screws, bolts, and other devices of same material as accessory unit andtamper-and-theft resistant.

2. Concealed:?Galvanized steel.

F. Chrome Plating:?ASTM B 456, Service Condition Number SC 2, moderateservice.

G. Mirrors:?ASTM C 1503, Mirror Glazing Quality, clear-glass mirrors,nominal 6.0 mm thick.

H. ABS Plastic:?Acrylonitrile-butadiene-styrene resin formulation.

2.3 COMMERCIAL HOSPITALITY BATHROOM ACCESSORIES

Bradley Surface Mounted Toilet Tissue Dispensers:

9184????????? BoutiqueSeries - Single roll, non-controlled delivery, single-point surface mount,exposed roll, chrome plated stainless steel with chrome plated Zamacescutcheon, and wall plate fabricated from zinc plated steel.

505?????????? Singleroll, controlled delivery, surface mount, exposed roll, chrome plated die castzinc.? 522 Dual roll version.

5053????????? Singleroll, controlled delivery, surface mount, exposed roll, epoxy coated bentaluminum.

5054????????? Singleroll, controlled delivery, surface mount, exposed roll, chrome plated steel.? 5224 dual roll version.

5061????????? Singleroll, controlled delivery, surface mount, exposed roll, bright polishedstainless steel.?

5071????????? Singleroll, controlled delivery, surface mount, exposed roll, die cast aluminum. 5241 dualroll version

508?????????? Singleroll, non-controlled delivery, surface mount, exposed roll, chrome plated castbrass.

508-32?????? Singleroll, non-controlled delivery, surface mount, exposed roll, chrome plated diecast Zamac alloy.? 523 dual rollversion.

5084????????? Singleroll, non-controlled delivery, surface mount, exposed roll, satin finishstainless steel. 5234 dual roll version.

5085????????? Singleroll, non-controlled delivery, surface mount, exposed roll, bright polishedstainless steel. 5235 dual roll version.

5106????????? Singleroll, non-controlled delivery, surface mount, hinged hood over roll, brightpolished stainless steel.? 5126 dualroll version.

515?????????? Sheettissue, surface mount, vandal resistant hinged locking cover, satin finishstainless steel.?

A. Toilet Tissue Roll Dispenser, Surface Mount TTDS:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

3. Capacity:?[Singleroll][Doubleroll][Sheettissue]dispenser.

4. Finish and Base Material:? [Chrome-plated stainless steel] [Die-castZamac alloy][Epoxy-coatedbent aluminum][Castaluminum][Chrome-platedsteel][Bright-polishedstainless steel][Satin-finishstainless steel]with polymer spindles.

5. Delivery:?[Controlled.] [Non-controlled.]

6. Mounting: [Surface-mounted.]

Bradley Recessed Mounted Toilet Tissue Dispensers:

510?????????? Singleroll, non-controlled delivery, recessed mount, exposed roll, chrome plated castbrass.

5102????????? Singleroll, non-controlled delivery, recessed mount, exposed roll, bright finish stainlesssteel.

5104????????? Singleroll, non-controlled delivery, recessed mount, exposed roll, satin finishstainless steel.

5105????????? Singleroll, non-controlled delivery, recessed mount, exposed roll, spare roll, polishedstainless steel.

5124????????? Dual roll,non-controlled delivery, recessed mount, exposed roll, satin finish stainlesssteel.

5125????????? Dual roll,non-controlled delivery, recessed mount, exposed roll, bright polishedstainless steel.

B. Toilet Tissue Roll Dispenser, Semi-RecessedMount TTDR:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Application:?[Ateach water closet, unless otherwise indicated.] [Where indicated] [insertlocation description].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

3. Capacity:?[Singleroll][Doubleroll]dispenser.

4. Finish and Base Material:? [Chrome-plated cast brass] [Bright-polished stainless steel] [Satin-finishstainless steel]with polymer spindles.

5. Delivery:?Non-controlled.

6. Mounting:?Recessed-mounted.

Bradley Towel Bar:

9180????????? BoutiqueSeries - Double bar, curved, nominal 24 inches long, surface mounted, chromeplated stainless steel with chrome plated Zamac escutcheon, and wall platefabricated from zinc plated steel.

9186????????? BoutiqueSeries - Same as Model 9180, but single bar.

9054????????? Surfacemounted, satin finish stainless steel, 3/4 inch square bar, 18, 24, or 30inches long.

9055????????? Surfacemounted, bright polished stainless steel, 3/4 inch square bar, 18 or 24 incheslong.

9065????????? Same asModel 9054, but 3/4 inch diameter round bar.

9066????????? Same asModel 9055, but 3/4 inch diameter round bar.?Also available in 30 inch length.

907?????????? Surfacemounted, chrome plated brass, 3/4 inch square bar, 18, 24, or 36 inches long.

908?????????? Surfacemounted, satin finish stainless steel, 1 inch diameter round bar, 18, 24, or 36inches long.

926?????????? Surfacemounted, chrome plated, die cast Zamac with cadmium plated wall plates.? 3/4 inch diameter round bar, 18, 24, or 30inches long.

927?????????? Surfacemounted, chrome plated, die cast Zamac with cadmium plated wall plates, 3/4inch square bar, 18, 24, or 30 inches long.

C. Towel Bar TB:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Configuration:?Surface mounted, [single bar] [double bar], [straight] [curved], [18 inch (457 mm)] [24 inch(610 mm)][30 inch (762 mm)] [36 inch (914 mm)].

3. Towel Bar Shape:?3/4 inch (19 mm) [square] [diameterround][1 inch (25 mm) diameter round].

4. Material:?[Stainlesssteel],[Brass], [Diecast Zamac]with [Zamac] [stainlesssteel][brass] escutcheons[andzinc plated steel wall plate] [and cadmium plated steel wall plate].

5. Finish:? [Chromeplated][Satinfinish stainless steel] exposed surfaces.

6. Application:?[Whereindicated][insertlocation description].

Bradley Towel Ring:

9185????????? BoutiqueSeries - polished chrome, open loop.

9334????????? Surface mounted,satin finish stainless steel, rectangular closed loop.

9335????????? Surfacemounted, bright polished stainless steel, rectangular closed loop.

934?????????? Surfacemounted, bright polished die cast Zamac, round closed loop.

D. Towel Ring TR:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Configuration:?Surface mounted, [rectangular ring] [round ring] [open end ring].

3. Material:?[Stainlesssteel with Zamac escutcheons and zinc plated steel wall plate.] [Diecast Zamac.]

4. Finish:?Chrome plated exposed surfaces.

5. Application:?[Whereindicated][insertlocation description].

Bradley Dual-Sided Swivel Vanity Mirror:

9181????????? BoutiqueSeries - Wall mounted, dual sided vanity mirror, one side flat, one side with3:1 magnification, chrome plated brass with chrome plated Zamac escutcheon, andwall plate fabricated from zinc plated steel.

E. Dual-Sided Swivel Vanity Mirror VM:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Application:?[Whereindicated][insertlocation description].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

3. Finish and Base Material:? Chrome plated brass with chrome plated Zamacescutcheon, and wall plate fabricated from zinc plated steel.

4. Mirror:?Swivel mounted on hinged arm, 8 inch (203 mm) diameter, one side flat, one side with 3:1magnification.

Bradley Fixed Grab Bars:

812?????????? 1-1/2 incho.d.? 18 ga stainless steel tubing.? 3-1/8 inch diameter 13 ga flanges; 22 gastainless steel escutcheons.? Satin Safetygrip, high polish, or safety grip with high polish finishes.? 817: ?Lessescutcheons.?

832?????????? 1-1/4 incho.d.? 18 ga stainless steel tubing.? 3-1/8 inch diameter 13 ga flanges; 22 gastainless steel escutcheons.? Satin safetygrip, high polish, or safety grip with high polish finishes.? 837:?less escutcheons.

852?????????? 1-inch o.d.? 18 ga stainless steel tubing.? 3-1/8 inch diameter 13 ga flanges; 22 gastainless steel escutcheons.? Satin safetygrip, high polish, or safety grip with high polish finishes.? 857: ?less escutcheons.

A. Fixed Grab Bars [GB36], [GB42], [GB48]:

1. Basis of Design, Fixed Grab Bar:? BradleyCorp., [Model 812 series 1-1/2inch (38 mm) diameter] [Model 832 series 1-1/4 inch (32 mm) diameter]? [Model 852 series 1 inch(25 mm) diameter].

2. Application:?[Whereindicated][insertlocation description].

3. Mounting: ?[Flanges with concealed fasteners] [Exposedflanges].

4. Material: Stainless steel, 0.05inch (1.27 mm) thick.

5. Length:? [Asdesignated][Asindicated].

6. Finish:? [Satin] [Safetygrip][Highpolish][Safetygrip with high polish].

Bradley Swinging Grab Bars:

8170-158?? 1-1/2 incho.d.? 18 ga stainless steel tubing.? 3/16 inch thick wall and floor flanges; 22 gasatin finish on exposed surfaces.?Includes alignment notches and pins to hold bar when swung into supportand departure positions.? -1:? Includes integral toilet tissue dispenser.

8370-101?? 1-1/4 incho.d.? 18 ga stainless steel tubing withsatin finish on exposed surfaces.? Satinor safety grip finishes.? 14 ga stainlesssteel wall plate.? Lowers to horizontalposition for support, and raises to vertical position for departure.? Projects 29 inches.

8370-102?? 1-1/4 incho.d. 18 ga stainless steel tubing with satin finish on exposed surfaces.? Satin or safety grip finishes.? 14 ga stainless steel wall plate.? Lowers to horizontal position for support,and raises to vertical position for departure. ?Projects 34 inches.

8370-103?? 1-1/4 incho.d. 18 ga stainless steel tubing with satin finish on exposed surfaces.? Satin or safety grip finishes.? 14 ga stainless steel wall plate.? Lowers to horizontal position for support,and raises to vertical position for departure. ?Includes integral toilet tissue dispenser withABS plastic spindle.

B. Swinging Grab Bars GBS:

1. Basis of Design, Horizontal Swing Away GrabBar:? Bradley Corp., Model 8170 series, ?1‑1/2inch (38 mm) diameter by 29-3/4inch (756 mm) length.

2. Basis of Design, Vertical Swing Up GrabBar:? Bradley Corp., Model 8370 series, 1‑1/4 inch(32 mm) diameter by [29 inch(737 mm) length] [34 inch (864 mm) length, with integral toilet tissue dispenser].

3. Application:?[Whereindicated][insertlocation description].

4. Mounting: ?[Flanges with concealed fasteners] [Exposedflanges].

5. Material: ?Stainless steel, 0.05 inch(1.27 mm) thick.

6. Finish:? [Satin] [Safetygrip][Highpolish][Safetygrip with high polish].

Towel Shelves:

9104????????? Surfacemounted stainless steel rung shelf.?Stainless steel support brackets welded to shelf.? Satin finish.?Standard lengths:? 18 or 24 inchesby 8 inches deep.? -90:? Includes full length towel bar underneath.

9105????????? Surfacemounted stainless steel rung shelf.?Stainless steel support brackets welded to shelf.? Bright polished finish.? Standard lengths:? 18 or 24 inches by 8 inches deep.? -90:? Includesfull length towel bar underneath.

930?????????? Surfacemounted die cast Zamac rung shelf.? Brightpolished finish.? Standard lengths:? 18 inches or 24 inches by 8-1/2 inches deep.? 9301:?Includes support braces.

C. Towel Shelf TS:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Application:?[Whereindicated][insertlocation description].

Specifier: ?Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

3. Mounting:?Surface mounted.

4. Material:?[Stainlesssteel][Diecast Zamac].

5. Length:? [18 inch (457 mm)] [24 inches (610 mm)].

6. Finish: [Polished stainless steel] [Polished chrome].

Medicine Cabinets:

175?????????? Recessed,stainless steel cabinet with satin finish on exposed surfaces.? Include razor blade disposal slot in back ofcabinet.? Interior stainless steelshelves, 3 adjustable, 1 fixed.?Stainless steel door on continuous hinge, with magnetic catch and springbuffered stop.? Door is adjustable forleft or right hand swing.? 1/4 inch floatglass, triple silver plated with electro copper plated layer and thermosetting paintbacking with shock-absorbing filler.? ‑10:??????????? Semi-recessed mount.? -11:? Surfacemounted.

9661????????? Recessed,polystyrene cabinet with white finish.?Interior polystyrene adjustable shelves.?Stainless steel door on continuous hinge, with magnetic catch and springbuffered stop.? Door is adjustable forleft or right hand swing.? Distortion-freefloat glass.

9663????????? Recessed,enameled steel cabinet with white finish.?3 enameled adjustable shelves.?Steel door on continuous hinge, with magnetic catch and spring bufferedstop.? Cabinet is reversible for left orright hand swing.? Distortion-free floatglass.

9664????????? Surfacemounted, enameled steel cabinet with white finish.? 2 enameled removable shelves.? Steel door on continuous hinge, with magneticcatch and spring buffered stop.? Cabinetis reversible for left or right hand swing.?Distortion-free float glass.

D. Medicine Cabinet MC:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Application:?[Whereindicated][insertlocation description].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

3. Mounting:?[Recessed.][Semi-recessed.][Surfacemounted.]

4. Cabinet:?

Specifier:? Select one description from subparagraphsbelow.

a. Stainless-steel, with four shelves, 3adjustable and one fixed.? Provide razorblade disposal slot in cabinet.

b. White polystyrene, with two adjustableshelves.

c. Enameled steel with [two] [three]adjustable shelves.

d. Enameled steel with two removable shelves.

e. Reversible for left or right hand door swing.

5. Finish:? [Satinstainless steel, on exposed surfaces.] [White.]

6. Door:? Fulllength piano hinge.? Adjustable for leftor right hand swing.? Magnetic catch withspring buffered stop and bumpers.

7. Mirror:?

Specifier:? Select required description fromsubparagraphs below, based upon model descriptions above.

a. 1/4 inch (6mm) tempered glass, triple silvered, electro-copper plated.

b. Distortion-free floatglass.

c. No. 8 polished stainless steel.

d. Satin finish stainless steel.

e. Polished 430 stainless steel.

Facial Tissue Dispensers:

987?????????? Recessed,galvanized cold-rolled steel cabinet with removable satin stainless steelfaceplate.? Face is held to cabinet byfriction catch.? Capacity:? One box of 100 facial tissues.? -78: Polished stainless steel faceplate.?

987-36?????? Recessed,galvanized cold-rolled steel cabinet with removable satin stainless steelfaceplate.? Face is held to cabinet byfriction catch.? Capacity:? One box of 300 facial tissues.? -78: Polished stainless steel faceplate.?

987-11?????? Surfacemounted, satin finish stainless steel.? Hingedface with integral catch for service.?Capacity:? One box of 100 facialtissues.

9878-36???? AccentSeries.? Recessed, 5/16 inch thick melaminelaminated over solid phenolic core.? FacePlate Color:? Color as selected frommanufacturer's standard colors.

E. Facial Tissue Dispenser FTD:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Application:?[Whereindicated][insertlocation description].

Specifier:? If required,retain descriptive characteristics below and edit to match specified model.

3. Material:?Galvanized steel in-wall cabinet.?[Stainlesssteel][Melaminelaminate over phenolic core] faceplate.

4. Finish:? [Satinstainless steel.][Polishedstainless? steel.] [Color as selected frommanufacturer's standard colors.]

5. Capacity:?[Boxof 100 facial tissues]? [Boxof 300 facial tissues].

Bradley Bottle Opener:

9164????????? Surfacemounted, satin finish stainless steel.

F. Bottle Opener BO:

1. Basis of Design:?Bradley Corp., Model 9164.

2. Application:?[Whereindicated][insertlocation description].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

3. Finish:?Satin stainless steel.

2.4 PUBLIC-USE SHOWER ROOM ACCESSORIES

Shower Curtain Rods:

953 ????????? Straightshower curtain rod with stainless steel mounting flanges and exposedfasteners.? 1 inch o.d. seamlessstainless steel tubing with satin finish on exposed surfaces.? Suitable for 36 to 72 inch shower stall.? For 72 inch length and greater, also specify showerrod ceiling support.? -78:? Bright polished finish.

9531????????? Same asModel 953, but 1-1/4 inch o.d. tubing.

9530????????? Curvedshower curtain rod with swiveled mounting brackets, satin finish.? 1 inch o.d. seamless stainless steel tubingwith satin finish on exposed surfaces. ?Supports 50 pounds.? -60:?60 inch.? -72:? 72 inch.?0078:? Bright polished finish.

9538????????? Same asModel 953, but with plastic mounting flanges and stainless steel snap-onescutcheons to conceal hardware.

9539????????? Same asModel 9538, but 1-1/4 inch o.d. tubing.

A. Shower Curtain Rod SCR:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

2. Description:?[1 inch (25 mm)] [1-1/4 inch (32 mm)] OD 0.05 inch- (12.7 mm-) thick stainless steel tubing, [curved] [straight].

3. Mounting Flanges:? [Stainless-steel flanges with exposedfasteners.][Plasticflanges with stainless steel snap-on escutcheons.]? Provide ceiling bracket where recommended bymanufacturer.

4. Finish:? [Satin] [Brightpolished].

Shower Curtains:

Width Tolerances:?36 inches:? Plus or minus 3inches.? 42 inches: ?Plus or minus 1 inch.? 48 inches:?Plus or minus 1 inch.? 54inches:? Plus or minus 5 inches.? 72 inches:?Plus or minus 3 inches.

9533????????? Antimicrobial6 ga. vinyl shower curtain, white.? Hemmededges and aluminum grommets on 6 inch centers at top edge.? Sizes:?36, 42, and 72 (W) by 72 (H) inches.

9534????????? 8 oz.cotton duck shower curtain, white.? Hemmedtop edge and chrome plated nickel grommets on 6 inch centers.? Various sizes.

9535????????? Antimicrobial10 oz. nylon-reinforced vinyl shower curtain, green.? Reinforced, flameproof, stain resistant, self-deodorizingfabric.? Hemmed edges and aluminumgrommets on 6 inch centers at top edge.?Sizes:? 42, 48, and 72 (W) by 72(H) inches.?

9537????????? Same asModel 9535:? White.

9536????????? Showercurtain hook, stainless steel spring wire clip with snap fastener.? Suitable for use with 1 inch and 1-1/4 inchshower curtain rods.

9540????????? Same asModel 9536, but includes 5 nickel plated brass rollers on each hook.

B. Shower Curtain SC:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

2. Material: [Nylon-reinforced, minimum 10oz./sq. yd. (237 g/sq. m)] [0.014 inch(0.36 mm)] thick vinyl, with integral antimicrobialagent][Cottonduck, minimum 10 oz./sq. yd. (190 g/sq. m)].? Aluminum grommets on 6 inch(152 mm) centers.

a. Color:? [White] [Green].

3. Shower Curtain Hooks: ?Stainless-steel, spring wire curtain hooks [withnickel plated brass rollers].

Soap Dishes:

900?????????? Surfacemounted, 7-gauge stainless steel, satin finish, formed as a single piece.? Includes three drain holes.

9001????????? Same asModel 900, but 18 gauge stainless steel with gussets.

901?????????? Surfacemounted, cast brass, nickel plated and highly polished chrome finish.? -60 With 3 drain holes.

9014????????? Surfacemounted, stainless steel with satin finish.?Includes four drain holes.?-63:? Without drain holes.

9015????????? Same asModel 9014, but with bright polished stainless steel.? -63 Without drain holes.

921?????????? Surfacemounted, die cast Zamac, copper nickel plated with highly polished chromefinish.? Includes cadmium plated steelwall plate.? -60 With drain holes.

9352????????? Recessmounted, bright polished stainless steel.?Includes removable soap tray.

9353????????? Same asModel 9352, but satin stainless steel finish.

936?????????? Recess mounted,polished chrome plated brass.? Includesremovable soap tray.

9362????????? Same asModel 9352, and includes matching towel bar.

9363????????? Same asModel 9353, and includes matching towel bar.

940?????????? Recessmounted, satin finish stainless steel, integral towel bar.? Incudes mortar lugs.

9401????????? Same asmodel 940, but without towel bar.

9402????????? Same asModel 940, but with wall clamp in place of mortar lugs.

9403????????? Same asModel 9401, but with wall clamp in place of mortar lugs.

C. Soap Dish SD:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

2. Mounting:?[Surface.] [Recessed.]

3. [Recessed Mounting Fittings:? [Mortar lugs.] [Wall clamp.]]

4. Material:?[Stainlesssteel.][Castbrass.][Diecast Zamac.]

5. Finish:? [Stainlesssteel, satin.][Polishedchrome.]

6. Drain Holes:?[With.] [Without.]

7. [Matching] [Integral] Towel Bar:?[Included.] [Notincluded.]

Soap Dish Unit with Towel Bar:

9034????????? Surfacemounted, stainless steel, satin finish, soap dish formed as a single piece andattached to towel bar.

9035????????? Same asModel 9034, but bright polished stainless steel finish.

D. Soap Dish with Towel Bar SDTB:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

2. Material:?[Stainlesssteel.][Castbrass.][Diecast Zamac.]

3. Finish:? [Stainlesssteel, satin.][Polishedchrome.]

4. Drain Holes:?[With.] [Without.]

Tumbler and Toothbrush Holder:

9044????????? Surfacemounted, satin stainless steel finish.

9045????????? Same asModel 9044, but bright polished stainless steel finish.

924?????????? Surfacemounted, die cast Zamac with polished chrome finish.

E. Tumbler and Toothbrush Holder TTH:

1. Basis of Design:?Bradley Corp., [ ___ ].

2. Material:?[Stainlesssteel.][Diecast Zamac.]

3. Finish:? [Stainlesssteel, satin.][Polishedchrome.]

4. Include vandal resistant escutcheon.

Robe Hooks:

9183????????? BoutiqueSeries:? Surface mounted, die cast Zamac,chrome plated.? Includes zinc platedsteel wall plate. Double hook.

911?????????? Surfacemounted clothes hook, chrome plated brass.?Single hook.

9111????????? Surfacemounted clothes hook, satin finish stainless steel.? Single hook.

9114????????? Surfacemounted, satin finish stainless steel.?Single hook.

9115????????? Surfacemounted, bright polished stainless steel.?Single hook.

9118????????? Surfacemounted robe hook, chrome plated brass.?Single hook.

9119????????? Surfacemounted clothes hook with concealed mounting hardware, chrome plated brass withchrome plated steel cover plate.? Singlehook.

912?????????? Surfacemounted clothes hook, chrome plated brass.?Double hook.

9124????????? Surfacemounted, satin finish stainless steel.?Double hook.

9125????????? Surfacemounted, bright polished stainless steel.?Double hook.

9134????????? Surfacemounted hat and coat hook, satin finish stainless steel.? Single hook for each.

9135????????? Surfacemounted hat and coat hook, bright polished stainless steel.? Single hook for each.

914?????????? Surfacemounted clothes hook, chrome plated brass.?Double hook.

915?????????? Surfacemounted clothes hook and door bumper, chrome plated brass.? Single hook.

931?????????? Surfacemounted, die cast Zamac, copper nickel plated with highly polished chromefinish.? Includes cadmium plated steelwall plate.? Single hook.

9311????????? Surfacemounted towel hook, die cast Zamac, copper nickel plated with highly polishedchrome finish.? Long projection (5-1/8inches).? Includes cadmium plated steelwall plate.? Single hook.

932?????????? Surfacemounted, die cast Zamac, copper nickel plated with highly polished chromefinish.? Includes cadmium plated steelwall plate.? Double hook.

F. Robe Hook RH:

1. Basis of Design:?Bradley Corp., [ ___ ].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specifiedmodel.

2. Description:?[Single] [Double] -prongunit, surface mounted.

3. Material and Finish:? [Chrome plated Zamac, with zinc plated steelwall plate] [Brightpolished stainless steel] [Satin stainless steel] [Chrome-plated brass] .

2.5 CUSTODIAL ACCESSORIES

Bradley Toilet Brush and Holder:

9182????????? BoutiqueSeries:? ?Polished Stainless steel toilet brush unit andholder

A. Toilet Brush and Holder TBH:

1. Basis of Design:?Bradley Corp., Model [ ___ ].

2. Application:?[Oneunit per toilet room] [Where indicated] [insert location description].

Specifier:? Ifrequired, retain descriptive characteristics below and edit to match specified model.

3. Description: ?Toilet brush on stainless steel handle, andcylindrical brush container.? Brushhandle includes integral container lid.

4. Materials:?Stainless steel metal parts; polymer brush.

5. Finish:? Polishedstainless steel.

6. Mounting:?Free-standing.

2.6 FABRICATION

A. General:?Fabricate units with tight seams and joints, and exposed edgesrolled.? Hang doors and access panelswith full-length, continuous hinges.?Equip units for concealed anchorage and with corrosion-resistant backingplates.

B. Keys:?Provide universal keys for internal access to accessories for servicingand resupplying.? Provide minimum of sixkeys to Owner's representative.

PART 3 - EXECUTION

3.1 INSTALLATION

A. Assemble fixtures and associated fittings andtrim in accordance with manufacturer's instructions.

B. Install supports attached to building structurefor equipment requiring supports.

C. Grab Bars:?Install grab bars to withstand downward force of not less than 250 lbf (1112 N) perASTM F 446.

D. Install equipment level, plumb, and firmly in placein accordance with manufacturer's rough-in drawings.

3.2 CLEANING AND PROTECTION

A. Repair or replace defective work, includingdamaged equipment and components.

B. Clean unit surfaces, and leave in ready-to-usecondition.

C. Turn over keys, tools, maintenance instructions,and maintenance stock to Owner.

3.3 TESTING AND ADJUSTING

A. Test each piece of equipment provided withmoving parts to assure proper operation, freedom of movement, and alignment.

B. Repair or replace malfunctioning equipment, orequipment with parts that bind or are misaligned.

END OF SECTION