SECTION 224223 - COMMERCIAL SHOWERS AND SHOWER VALVES

BRADLEY COMMERCIAL SHOWERS AND SHOWERVALVES

Bradley Corporation, a leader in the manufacture of toilet roomfixtures and plumbing products, produces a complete line of commercial showersand shower valves including nine single person wall mounted showers with threeADA/ABA compliant models; and sixteen wall and column mounted group showerswith five ADA/ABA compliant models. Helpful and informative websiteillustrations and sizing tools make selection a straight-forward task.? See illustrations and tools at www.bradleycorp.com/products/tmv/tools.

Responding to recent legislation, Bradley Navigator^?line of thermostatic mixing valves are manufactured from lead-free brasscastings and bar stock to comply with the most stringent rules that require lessthan one-quarter of one-percent lead content.

Architects, engineers, and specifierslook to Bradley Corporation for innovation in design and leadership in thedevelopment of environmentally conscious products.? Bradley Corporation, a member of the U.S.Green Building Council, the Wisconsin Green Building Alliance, has severalproducts earning certification by Greenguard Environmental Institute, andGreenguard Children and Schools program.

Bradley makes it easy to specify products with helpful informationtools on an advanced website, and a seasoned customer service staff.? Easy-to-use sizing software, available onBradley's website, allows engineers to quickly determine the correct size ThermostaticMixing Valves.? Bradley is the industry leaderin the manufacture of premium quality commercial plumbing fixtures, valves,TMVs and washroom accessories that appear in the following CSI MasterFormat2004? Sections:

Section 10 21 13? Toilet Compartments (Mills Metal, Plastic-laminate, Phenolic, and Plasticunits)

Section 10 28 13.13? Commercial Toilet Accessories

Section 10 28 13.15? Hand and Hair Dryers

Section 10 28 13.63? Detention Toilet Accessories

Section 10 51 26.00? Plastic Lockers (Lenox Plastic Lockers)

Section 10 51 26.13? Plastic Lockers (Lenox Recycled Plastic lockers)

Section 22 11 19? Domestic Water Piping Specialties (Thermostatic mixing valves)

Section 22 42 16.01? Commercial Lavatories and Faucets (Single and multi-station lavatory systems)

Section 22 42 16.02? Commercial Lavatories and Faucets (Bradley Advocate Lavatory System)

Section 22 42 16.03? Commercial Lavatories and Faucets (Bradley Verge Lavatory System)

Section 22 42 16.11? Commercial Sinks and Faucets

Section 22 42 23? Commercial Showers and Shower Valves

Section 22 42 33? WashFountains

Section 22 43 00? Healthcare Plumbing Fixtures (Patient care lavatory units)

Section 22 45 00? Emergency Plumbing Fixtures (Emergency EyewashFixtures and Drench Showers)

Section 22 46 00? Security Plumbing Fixtures

Contact Bradley Corporation, Menomonee Falls, WI 53051;Phone: ?800-BRADLEY ((800)272-3539)Fax:? (262)251-5817, or visit the Bradleyweb site www.bradleycorp.com.

Bradley Corporation is an AIA/CES registered provider currentlyoffering five programs earning one (1) HS&W Learning Unit each; severalqualify for sustainable design (SD) credit.?All active AIA members must successfully complete 18 learning unit (LU)hours each year.

Navigator^?is a registered trademark of Bradley Corporation.

MasterFormat? is a trademark of theConstruction Specifications Institute.

SECTION 22 42 23
COMMERCIAL SHOWERS AND SHOWER VALVES

PART 1 - GENERAL

1.1 SECTION INCLUDES

A. Individual showers.

B. Group showers.

C. Shower basins.

D. Shower valves.

E. Related Requirements

1. Division 22 Section "Domestic WaterPiping Specialties" for Thermostatic Control Valves.

2. Division 22 Section "HealthcarePlumbing Fixtures" for healthcare showers.

3. Division 22 Section "EmergencyPlumbing Fixtures" for emergency showers.

4. Division 22 Section "Security PlumbingFixtures" for security showers.

1.2 REFERENCES

A. American National Standards Institute (ANSI):

1. ANSI/ICPA SS-1-2001 - Performance Standard forSolid Surface Materials.

2. ICC/ANSI A117.1 - Accessible And UsableBuildings And Facilities.

B. American Society of Mechanical Engineers (ASME):

1. ASME A112.18.1/CSA B125.1 - PlumbingSupply Fittings.

C. American Society of Sanitary Engineering (ASSE):

1. ASSE 1016-2005 - Performance Requirements forAutomatic Compensating Valves for Individual Showers and Tub/ShowerCombinations.

2. ASSE 1017-2005 - Performance Requirements forTemperature Actuated Mixing Valves for Hot Water Distribution Systems.

D. American National Standards Institute (ANSI):

1. ANSI Z124.1.2 ? Plastic Bathtubs and ShowerUnits.

E. International Association of Plumbing andMechanical Officials (IAPMO):

1. Uniform Plumbing Code US (UPC) and Canadian Codesand Standards (cUPC).

F. NSF International (NSF):

1. NSF 61 - Drinking Water System Components -Health Effects," for shower materials that will be in contact with potablewater.

1.3 ACTION SUBMITTALS

A. Product Data:?Manufacturer?s data sheets.

LEED WE Credit 2 is for50 percent reduction in water use for building sewer, based on use ofwater-conserving fixtures documented under Credit WE 3.? LEED WE Credit 3 is for 30,35, or 40 percent reduction in water usage. Coordinate with Division 01requirements for LEED MR Credit 5 Regional Materials where applicable.

B. LEED Submittals:

1. Product Data for [Credit WE 2] [and] [Credit WE 3]:? Documentation indicating compliance withrequirements.

1.4 CLOSEOUT SUBMITTALS

A. Maintenance Data:? For shower faucets to include in maintenanceparts manuals.

1.5 QUALITY ASSURANCE

A. Source Limitations:? Obtain each type of plumbing fixture andcompatible accessories through one source from a single approved manufacturer.

B. Regulatory Requirements:? Comply with requirements in [ICC A117.1, "Accessible and Usable Buildingsand Facilities"][; PublicLaw 90-480, "Architectural Barriers Act"; and PublicLaw 101-336, "Americans with Disabilities Act";] for plumbing fixtures for people withdisabilities.

C. Water Flow and Consumption Requirements: ?Comply with Public Law 102-486 "EnergyPolicy Act."

D. Drinking Water Standard: ?Comply with NSF 61, "Drinking WaterSystem Components ? Health Effects," where applicable.

PART 2 - PRODUCTS

2.1 MANUFACTURERS

A. Basis-of-Design Product:? Subject to compliance with requirements,provide showers and shower valves manufactured by Bradley Corporation, Menomonee Falls, WI 53051, (800)272-3539,fax (262)251-5817, www.bradleycorp.com.

Specifier:? Retain one ofthree paragraphs below based upon Project requirements.

1. Submit comparable products of one of thefollowing for approval by Architect:

a. [Specifier:? Insert name of manufacturer ofcomparable product.]

2. Submit requests for substitution in accordancewith Instructions to Bidders and Division 01 General Requirements.

3. Provide specified product; Owner will notconsider substitution requests.

2.2 COMMERCIAL SHOWERS, GENERAL

A. Commercial Shower Materials and Fabrication

1. Exposed Parts finish:? Type 304 stainless steel or chrome-platedbrass.

2. Nominal stainless steel thickness:? 0.050 inch (1.3 mm) minimum.

3. Valve Bodies:?Solid brass castings.

4. Supply Inlets, Individual Showers:? 1/2-inch NPT, 24-inch (610 mm) long flexiblestainless steel hoses unless otherwise indicated.

5. Supply Inlets, Group Showers:? 3/4-inch (19 mm) Type L rigid copper.

B. Flow Control:?2 gpm (7.6 L/min.) unlessnoted otherwise.

2.3 INDIVIDUAL SHOWERS

Insert number to complete drawing designation.? Use these designations on Drawings toidentify each shower type.

A. ADA/ABA Compliant Individual Coverall WallShower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1WCA-ADA.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Shower Head:?Hand-held shower head on 60-inch, 1/2-inch NPT flexible SS hose withinline backflow preventer, quick disconnect, and bracket.

4. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

5. Flow Control:?[2 gpm (7.6 L/min.)] [2.5 gpm (9.5 L/min.)].

6. Soap Dish:?Attached.

7. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

8. Grab Bar Configuration:? [24-inch(610 mm) straight] [Two-wall] [Slide bar].

B. Individual Coverall Wall Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1WCA.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

5. Soap Dish:?Attached.

C. ADA/ABACompliant Individual Pivoting Wall Shower SHR#___:? Wall mounted shower, with stainless steelpivoting hinges.

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1X-HN.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Hand-held shower head on 60-inch, 1/2-inch NPT flexible SS hose withinline backflow preventer, quick disconnect, and bracket.

4. Diverter valve: Lever handle for transfer ofwater between fixed showerhead and hand held spray.

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

6. Soap Dish:?Attached.

7. 24-inch (610mm) shower head vertical slide bar.

8. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

9. Grab Bar Configuration:? [24-inch(610 mm) straight] [Two-wall] [Slide bar].

D. Individual Pivoting Wall Shower SHR#___:? Wall shower, with adjustable directionshowerhead and pivoting wall hinges.

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1X.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Chrome plated brass with ball joint and adjustable spray pattern.

4. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

5. Soap Dish:?Attached.

E. ADA/ABA Compliant Corner Mounted Individual WallShower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1K-HN.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray and hand-held shower head on 60-inchlong, 1/2-inch NPT flexible SS hose with inline backflow preventer, quickdisconnect, and bracket.

4. Diverter Valve:?Lever Handle for transfer of water between fixed showerhead and handheld spray.

5. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

6. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

7. Soap Dish:?Attached.

8. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

9. Grab Bar Configuration:? [24-inch(610 mm) straight] [Two-wall] [Slide bar].

F. Corner Mounted Individual Wall Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1K.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction adjustable spray.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

6. Supply Connections:? 1/2-inch (12.7 mm) type L copper.

7. Soap Dish:?Attached.

G. ADA/ABA compliant Built-In Shower With ConcealedSupplies SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. 1C-EF.SB.

2. Description:?ADA/ABA compliant individual built-in shower, with concealed suppliesSee valve selections below.

3. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

4. Showerhead:?ADA/ABA compliant hand-held shower head on 60-inch, 1/2-inch NPTflexible SS hose with inline backflow preventer, quick disconnect, and [wallbracket] [slide bar].

5. Flow Control:?[2 gpm (7.6 L/min.)][1.5 gpm (5.7 L/min.)].

6. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

7. Soap Dish:?Attached.

8. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

9. Grab Bar Configuration:? [24-inch(610 mm) straight] [Two-wall] [Slide bar].

H. Built-In Shower with Concealed Supplies SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. 1C-EF/S.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Flow Control:?[2 gpm (7.6 L/min.)] [1.5 gpm (5.7 L/min.)].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

6. Tub Spout:?Diverter type spout to direct water from tub spout to showerhead.

7. Soap Dish:?Attached.

I. Individual Flush Mounted Wall Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1F:

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed, adjustable spray.

4. Flow Control:?[2 gpm (7.6 L/min.)] [1.5 gpm (5.7 L/min.)].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

6. Soap Dish:?Attached.

J. Adapt-A-Brad Individual Renovation Wall MountedShower[, ADA/ABAcompliant] SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. WS-1WAB.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

5. Flow Control:?[2 gpm (7.6 L/min.)] [2.5 gpm (9.5 L/min.)].

6. Soap Dish:?Attached.

2.4 GROUP SHOWERS

Insert drawing designation below. Include designations on thedrawings to identify Group Showers.

A. ADA/ABA Privacy 4-Person Multi-Stall ColumnShower SHR#___:

1. Basis-of-Design Product: Bradley Corporation Model No. HN450

2. Description:?ADA/4-person multistall column shower with 1 ADA/ABA compliant stall.

3. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

4. Showerhead:?4-Fixed direction, adjustable spray, and 1-Hand-held shower head on60-inch long, 1/2-inch NPT flexible SS hose with inline backflow preventer,quick disconnect, and bracket at ADA/ABA unit.

5. Diverter Valve:?Lever handle for transfer of water flow between fixed and hand heldshower head on ADA/ABA unit.

6. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

7. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HD pressurebalancing valve] [Thermostatic mixing valve].

b. Single Tempered/Cold Supply: ?[Mechanical metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

8. Inlets:? 3/4-inch (19 mm) Type Lcopper.

9. Drain:?Cast iron, with stainless steel mounting bolts.

10. Supplies:?[Fromabove][Frombelow].

11. Vent:? [Offline][Throughcolumn].

12. Curtains:?60 by 74-inch high heavy gauge translucent vinyl with hemmed edges andzinc-chromate finish steel wire curtain hooks.

13. Soap Dish:?Attached shower column.

14. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

15. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

16. Grab Bar:?24-inch(610 mm) long.

B. ADA/ABA Privacy 4-Person Column Shower andModesty Module SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. HN500:

2. Description:?4-person column shower with 1 ADA/ABA compliant stall, curtain and seat.

3. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

4. Showerhead:?4-Fixed direction, adjustable spray and 1-Hand-held shower head on60-inch long, 1/2-inch NPT flexible SS hose with inline backflow preventer,quick disconnect, and bracket.

5. Diverter Valve:?Lever handle for transfer of water flow between fixed and hand heldshower head on ADA/ABA compliant unit.

6. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

7. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply: ?[Pneumatic metering valve] [Single-compression valve ] [Electronic metering valve].

8. Inlets:? 3/4-inch (19 mm) Type Lcopper.

9. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

10. Supplies:?[Fromabove][Frombelow].

11. Vent:? [Offline][Throughcolumn].

12. Soap Dish:?Attached.

13. Mounting:?Floor Mounted.

14. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

15. Grab Bar:?Two, 24-inch(610mm) long.

C. ADA/ABA Compliant Multi-Stall Column Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [COL-2C-HN 2 person] [COL-3C-HN3 person] [COL-4C-HN4 person] [COL-5C-HN5 person] [COL-6C-HN6 person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Combination fixed direction, adjustable spray at each station and 1 handheld shower head on 60-inch long, 1/2-inch NPT flexible SS hose with inlinebackflow preventer, quick disconnect, and bracket.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply: ?[Pneumatic metering valve] [Single-compression valve ] [Electronic metering valve].

6. Diverter Valve:?Two position diverter valve between fixed showerhead and hand-heldshowerhead.

7. Curtains:?60 by 74-inch high heavy gauge translucent vinyl with hemmed edges andzinc-chromate finish steel wire curtain hooks.

8. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

9. Supplies:?[Fromabove][Frombelow].

10. Vent:? [Offline][Throughcolumn].

11. Soap Dish:?Attached.

12. Mounting:?Floor Mounted.

13. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

14. Grab Bar:?Vertical mounted on column.

D. Privacy Multi-Stall Column Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [COL-2C MS 2 person] [COL-3C MS3 person] [COL-4C MS4 person] [COL-5C MS5 person] [COL-6C MS6 person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply: ?[Pneumatic metering valve] [Single-compression valve ] [Electronic metering valve].

6. Curtains:?60 by 74-inch high heavy gauge translucent vinyl with hemmed edges andzinc-chromate finish steel wire curtain hooks.

7. Posts:?1-1/4-inch by 80-inch long SS cylindrical tubing with expansion anchorand concealed foot angle.

8. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

9. Supplies:?[Fromabove][Frombelow].

10. Vent:? [Offline][Throughcolumn].

11. Soap Dish:?Attached.

12. Mounting:?Floor Mounted.

E. Wall Saver Multishower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [WS-2WMD-2 person] [WS-3WMT3 person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply: ?[Pneumatic metering valve] [Single-compression valve ] [Electronic metering valve].

6. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

7. Supplies:?[Fromabove][Frombelow].

8. Vent:? [Offline][Throughcolumn].

9. Soap Dish:?Attached.

F. 2?5 Person Column Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [COL-2C 2 person] [COL-3C 3person] [COL-4C4 person] [COL-5C5 person] [COL-6C 6 person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply: ?[Pneumatic metering valve] [Single-compression valve ] [Electronic metering valve].

6. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

7. Supplies:?[Fromabove][Frombelow].

8. Vent:? [Offline][Throughcolumn].

9. Soap Dish:?Attached.

Specifier:? Retain optionalpartitions below if required for project.

10. Privacy Partitions:? Series 300 SS sandwich type constructionprivacy partitions with 300 Series SS cylindrical tubing posts and 60 by 74-inch (1524-mm by 1829-mm)translucent vinyl curtains with hemmed edges, aluminum grommet reinforcedeyelets and zinc-chromate finish steel wire curtain hooks.

G. ADA/ABA Compliant Econo Wall Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [WS-2W-HN 2 person] [WS-3W-HN3 person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Two fixed direction, adjustable spray, and one hand held shower head on60-inch long, 1/2-inch NPT flexible SS hose with inline backflow preventer,quick disconnect, and bracket.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

6. Diverter Valve:?Two position diverter valve to direct water between fixed showerhead andhand-held showerhead.

7. Soap Dish:?Attached.

8. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

9. Grab Bar:?24-inch(610-mm) straight.

H. Econo-Wall Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [WS-2W 2 person] [WS-3W 3person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

6. Soap Dish:?Attached.

Specifier:? Retain optionalpartitions below if required for project.

7. Privacy Partitions:? Series 300 SS sandwich type constructionprivacy partitions with 300 Series SS cylindrical tubing posts and 60 by 74-inch (1524-mm by 1829-mm)translucent vinyl curtains with hemmed edges, aluminum grommet reinforcedeyelets and zinc-chromate finish steel wire curtain hooks.

I. ADA/ABA Compliant Wall Mounted Panelon PrefabricatedModular Shower System SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. 1PA-HN.

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray and hand held shower head on 60-inchlong, 1/2-inch NPT flexible SS hose with inline backflow preventer, quickdisconnect, and bracket.

4. Diverter Valve:?Two position diverter valve between fixed showerhead and hand-heldshowerhead.

5. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

6. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Pneumatic metering valve] [Single-compressionvalve ] [Electronic metering valve].

7. Soap Dish:?Attached.

8. Barrier Free Seat:? [Left hand, plastic] [Righthand, plastic] [Left hand, stainless steel] [Right hand, stainless steel].

9. Grab Bar:?24-inch(610 mm) straight.

J. Panelon Prefabricated Modular Shower System SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [1PA-1 person ] [2PA 2person ].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

6. Supply Inlets:?[1? 4 showerheads: ?3/4-inch(19 mm)] [5-8showerheads: ?1-inch(25 mm)] [9-12 showerheads: ?1-1/4-inch (32 mm)] [12 or more showerheads: ?2-inch(50 mm)] Type L rigid copper.

7. Soap Dish:?Attached.

K. Modesty Module with Column or Econo-Wall ShowersSHR#___:

1. Basis-of-Design Product:? BradleyCorporation Models No. 4000 series.

2. Description:?Modesty module compartments with column mounted or Econo-Wall multishowers. Column is drilled and tapped to receive partition stirrups.

3. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

4. Showerhead:?Fixed direction, adjustable spray.

5. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

6. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

7. Partitions:?Series 300 SS sandwich type construction privacy partitions and 1-1/4-inch (32-mm), SScylindrical tubing posts.

8. Curtains:?60 by 74-inch(1524-mm by 1829-mm)translucent vinyl curtain with hemmed edges, aluminum grommet reinforcedeyelets and zinc-chromate finish steel wire curtain hooks.

9. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

10. Supplies:?[Fromabove][Frombelow].

11. Vent:? [Offline][Throughcolumn].

12. Soap Dish:?Attached.

L. 2?6 Person Beach Column Shower SHR#___:? With 1 foot spray per column.

1. Basis-of-Design Product:? BradleyCorporation Model No. [COL-2B 2 person] [COL-3B 3person] [COL-4B4 person] [COL-5B5 person] [COL-6B 6person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spray.

4. Height to Nozzles:? [66 inches (1675 mm)] [72 inches (1830 mm)].

5. Shower Valve:?

a. Single Tempered/Cold Supply:? [Pneumatic Metering Valve] [Single Compression Valve].

6. Drain Fitting:?[Clampingring for flashing] [Dome grate drain].

M. Wall Mounted Multi-Stall Privacy Shower SHR#___:

1. Basis-of-Design Product:? BradleyCorporation Model No. [WS-2W-MS-2 person] [WS-3W-MS3 person].

2. Standards:?ASME A112.18.1/CSA B125.1 and ASSE 1016.

3. Showerhead:?Fixed direction, adjustable spr ay for each station.

4. Height to Nozzle:? [Adult 72 inches (1830 mm) AFF] [Juvenile 66 inches (1675 mm)AFF].

5. Shower Valve:

a. Hot/Tempered and Cold Supplies:? [Pressure balancing valve] [HDpressure balancing valve] [Thermostaticmixing valve ] [Hot and cold compression valve].

b. Single Tempered/Cold Supply:? [Infra-red metering valve] [Mechanical metering valve] [Pneumaticmetering valve][Single-compressionvalve ] [Electronic metering valve].

6. Soap Dish:?Attached.

Specifier:? Retain optionalpartitions below if required for project.

1. Privacy Partitions:? Series 300 SS sandwich type constructionprivacy partitions with 300 Series SS cylindrical tubing posts and 60 by 74-inch (1524-mm by 1829-mm)translucent vinyl curtains with hemmed edges, aluminum grommet reinforcedeyelets and zinc-chromate finish steel wire curtain hooks.

2.5 SHOWER BASINS

A. Shower Basins SHR#___:? Solid-surfaceshower basin with textured floor, ribbed bottom with center drain and chromeplated, brass drain assembly.

1. Basis-of-Design Product:? BradleyCorporation, Terreon Solid Surface Material Shower Basin.

2. Standard:?ANSI/Z1 24.2 for solid-surface material.

3. Type:? [Standardresidential][Accessible].

4. Nominal Size and Shape:? [32 by 36 inches (813 by 915 mm)] [36 by 36 inches (915 by 915 mm)].

5. Color:? [DesignerWhite][MesaBone][LondonGray][OrganicTaupe] [As selected by architect from manufacturer'sfull line].

6. Outlet:?Drain with NPS 2 outlet.

7. Bathing Surface:?Slip resistant according to ASTM F 462.

2.6 SHOWER VALVES

A. Shower Valves, General:

1. Valve Bodies:?Solid brass castings.

2. Exposed Parts finish:? Type 304 Stainless steel or chrome-platedbrass.

3. Nominal stainless steel thickness:? 0.050inch (1.3 mm)minimum.

B. Accessible Pressure Balancing Valve [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. S59-1000 Equa-Flo Pressure Balancing Valve

2. Description:?ADA/ABA compliant pressure balancing valve with inlet check stops,ceramic disc cartridge and stainless steel balancing piston.? Adjustable hot temperature limit stop, and ADA compliant leverhandle

3. Faucet:

a. Standards:?ASSE 1016 and cUPC.

b. Finish:?Polished chrome plate.

c. Maximum Flow Rate:? 5gpm (19 L/min)at 45-psig(310-kPa)pressure drop

d. Operation:?Lever-handle, twist or rotate control.

e. Cartridge:?Ceramic.

f. Anti-scald Device:? Integral with mixing valve.

g. Check Stops:?Check-valve type, integral on hot- and cold-water supply connections.

h. Supply Connections:? 1/2-inchNPT.

C. Accessible Pressure Balancing Valve [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. S59-1001 Equa-Flo C5 Pressure Balancing Valve.

2. Description:?ADA/ABA compliant pressure balancing valve with inlet check stops,ceramic cartridge and stainless steel balancing piston, adjustable hottemperature limit stop, and ADAcompliant lever handle

3. Faucet:

a. Standards:?ASSE 1016 and cUPC.

b. Finish:?Polished chrome plate.

c. Maximum Flow Rate:? 5gpm (19 L/min).at45-psig(310-kPa)pressure drop

d. Operation:?Lever-handle, twist or rotate control.

e. Cartridge:?Ceramic.

f. Antiscald Device:? Integral with mixing valve.

g. Check Stops:?Check-valve type, integral on hot- and cold-water supply connections.

h. Supply Connections:? 1/2-inchNPT.

D. Accessible Pressure Balancing Valve [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. S59-1005 Equa-Flo HD Pressure Balancing Valve.

2. Description:?ADA/ABA compliant pressure balancing valve with inlet check stops,stainless steel cartridge and balancing piston adjustable hot temperature limitstop, and ADAcompliant lever handle

3. Faucet:

a. Standards:?ASSE 1016 and cUPC.

b. Body Material:?Solid brass.

c. Finish:?Polished chrome plate.

d. Maximum Flow Rate:? 5.5gpm (20 L/min).at45-psig(310-kPa)pressure drop.

e. Operation:?Lever-handle, twist or rotate control.

f. Cartridge:?Stainless steel.

g. Anti-scald Device:? Integral with mixing valve.

h. Check Stops:?Check-valve type, integral on hot- and cold-water supply connections.

i. Supply Connections:? 1/2-inchNPT.

E. Individual Thermostatic Mixing Valve [CSV#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. S59-2005 Individual Shower Thermostatic Mixing? Valve.

2. Description:?ADA/ABA compliant thermostatic mixing valve with inlet check stops, wax-filledthermostat, stainless steel cartridge and stainless steel piston, adjustablehot temperature limit stop, and ADAcompliant lever handle

3. Faucet:

a. Standards:?ASSE 1016.

b. Body Material:?Solid brass.

c. Finish:?Polished chrome plate.

d. Maximum Flow Rate:? 4gpm (15 L/min)at 45-psig (310-kPa) pressure drop.

e. Operation:?Lever-handle, twist or rotate control.

f. Anti-scald Device:? Integral with mixing valve.

g. Check Stops:?Check-valve type, integral on hot- and cold-water supply connections.

h. Supply Connections:? 1/2-inchNPT.

F. Two-Handle Compression Valve [CSV#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. 1C-HC Two Handle Compression Valve.

2. Description:?Two-handle user regulated temperature compression valve.

3. Faucet:

a. Standards:?ASSE 1016 and cUPC.

b. Body Material:?Solid brass.

c. Finish:?Polished chrome plate.

d. Operation:?Solid SS, swept back design handles, twist or rotate control.

e. Supply Connections:? 1/2-inchNPT.

Specifier:? Retain optionalsubparagraph below when required.

f. Check Stops:?Check-valve type, integral on hot- and cold-water supply connections.

G. Single-Handle Compression Valve [CSV#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. 1C-SV Single Handle Compression Valve.

2. Description:?Single-handle user temperature regulated compression valve.

3. Faucet:

a. Standards:?ASSE 1016 and cUPC.

b. Body Material:?Solid brass.

c. Finish:?Polished chrome plate.

d. Operation:?Solid SS, swept back design handles, twist or rotate control.

e. Supply Connections:? 1/2-inchNPT.

Specifier:? Retain optionalsubparagraph below when required.

f. Check Stops:?Check-valve type, integral on hot- and cold-water supply connections.

H. Accessible Single-Temperature Two-Handle CompressionValve [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. 1C-SV Accessible Single Lever Handle CompressionValve.

Specifier:? Compressionvalves must be supplied with hot water from a thermostatic mixing valve.

2. Description:?ADA/ABA compliant compression valve requiring system wide mastertempered water controller.

3. Faucet:

a. Standards:?ASSE 1016 and cUPC.

b. Body Material:?Solid brass.

c. Finish:?Polished chrome plate.

d. Operation:?ADA/ABA compliant, twist or rotate control.

e. Check Stops:?Check-valve type, integral with or attached to body; on hot- andcold-water supply connections.

f. Supply Connections:? 1/2-inch NPT.

Specifier:? Retain optionalsubparagraph below when required.

g. Check-valve, attached to body; on hot- andcold-water supply connections.

I. Infrared Single-Source Shower Control Valve [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. 1C-AZ? Accu-ZoneInfrared Control Valve.

Specifier:? Accu-ZoneInfrared Shower Control Valves must be supplied with hot water from athermostatic mixing valve source.?Accu-Zone Shower control valves require placement in a plumbing chase orprovided with other means of access from behind the wall of the shower.

2. Description:?Vandal resistant, low voltage, infrared sensing, adjustable self timingsolenoid operation single source shower control valve consisting of infraredsensor/timer and a solenoid valve.

3. Valve:

a. Body Material:?Stainless Steel face plate.

b. Operation:?Infrared sensor activated electric solenoid valve.

c. Infrared Shield:?Polycarbonate.

d. Solenoid Voltage:? 24-volt, 50-60-hertz.

e. Supply Connections:? 1/2-inchNPT.

Specifier:? Retain optionalsubparagraph below when required.

4. Low Voltage Transformer.

J. Single-Source Push-Button Shower Metering Valve [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. Presto 50B Metering Valve.

Specifier:? Presto 50Bpush-button metering valves must be supplied with hot water from a thermostaticmixing valve source.

2. Description:?Energy saving, self-metering shower control valve, with chrome platedbody and self cleaning ruby orifice for long term reliability.

3. Faucet:

a. Body Material:?Solid brass.

b. Finish:?Polished chrome plate.

c. Operation:?Easy-touch push-button operation.

d. Timing Cycle:?Preset 30-seconds.

e. Timing Cycle Control:? Laser drilled, ruby orifice with springoperated cleanout pin.

f. Supply Connections: 3/8-inch NPT.

K. Accessible Electronic Shower Metering Valves [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. 1C-TT TouchTime Electronic Control Shower Valve.

Specifier:? TouchTimeElectronic Metering Valves must be supplied with hot water from a thermostaticmixing valve source.? TouchTimeElectronic Metering Valves requires placement in a plumbing chase or providedwith other means of access from behind the wall of the shower.

2. Description:?ADA/ABA compliant, easy-touch push button solid state electronic controland solenoid shower valve.

3. Valve:

a. Push-Button Material:? Stainless Steel.

b. Face Plate Material:? Chrome plated brass.

c. Operation:?Easy touch push button.

d. Timing:?Factory preset [60seconds][180 seconds].

e. Solenoid

1) Voltage:?24-volt, 50-60-hertz.

f. Supply Connections:? 1/2-inchNPT.

Specifier:? Retain optionalsubparagraph below when required.

4. Low Voltage Transformer.

L. Accessible Push-Button Air Metering Valves [CSVA#___].

1. Basis-of-Design Product:? BradleyCorporation, Model No. 1C-AST Air Metering Shower Control Valve.

Specifier:? Air-MeteringValves must be supplied with hot water from a thermostatic mixing valve source.Air-Metering Valves require placement in a plumbing chase or provided withother means of access from behind the wall of the shower.

2. Description:?ADA/ABA compliant, solid state electronic, easy-touch push button showercontrol.

3. Valve:

a. Push-Button Material:? Chrome plated brass.

b. Actuator Face Plate Material:? Chrome plated brass.

c. Operation:?Easy touch push button.

d. Push-Button Pneumatic Actuator:?

e. Air Metering Valve

1) Inlet from Tempered Water Valve:? 1/2-inch IPS

2) Outlet to Showerhead:? 3/8-inch IPS.

f. Timing:?Adjustable from 5 to 45 seconds.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine water supply, sanitary piping, and ventpiping rough in for coordination with shower installation before beginninginstallation.

B. Examine architectural installation forcompliance with codes a requirements of the manufacturer..

C. Correct unsatisfactory conditions beforestarting with installation..

3.2 INSTALLATION

A. Assemble and install shower components inaccordance with manufacturer's instructions. .

B. Install stops on each water supply piping.

1. Install stops in locations where they can beeasily reached for operation.

C. Set shower basins in leveling bed of cementgrout.

D. Install wall flanges or escutcheons at pipingwall penetrations in exposed, finished locations.? Use deep-pattern escutcheons if required toconceal protruding fittings. ?Comply withescutcheons requirements specified in Division 22 Section"Escutcheons for Plumbing Piping."

3.3 CONNECTIONS

Coordinate piping arrangement in accordance with plumbingschematics and with requirements specified in piping systems.

A. Connect fixtures with water supplies, stops, andrisers, and with traps, soil, waste, and vent piping.

B. Comply with water piping, soil waste and ventpiping? requirements specified inDivision 22.

3.4 ADJUSTING

A. Operate and adjust showers and controls and? adjust water pressure as needed.? Replace damaged and malfunctioning showers,fittings, and controls.

3.5 CLEANING AND PROTECTION

A. Repair any damaged finishes after installationis complete..

B. Clean shower equipment and basins withmanufacturer's recommended cleaning products.

C. Add protective covering after installation.

END OF SECTION