SECTION 224313 - HEALTHCARE PLUMBING FIXTURES

BRADLEY PATIENTCARE UNITS GUIDE SPECIFICATION

Bradley'scombination lavatory/water closet modules are designed based on extensiveresearch with health care professionals.?They offer extensive functional features to enhance staff productivityand patient safety.? These practicalfixtures provide a patient toilet, lavatory, and additional support accessoriesin a cabinet/countertop unit.

Atbedside, Bradley patient care units are a more hygienic and are physiologicallyand psychologically superior replacements for bedpans or commodes. They offer acost-effective alternative to separate bathrooms.? And, as a convenient water source and testingarea, they also give your staff an efficient patient care station.

Thereare several patient care modules to choose from to meet the needs of a varietyof hospital, clinic, and nursing home applications.? These include: critical and telemetry care,rehab, gastrointestinal, proctology, X-ray, oncology labs, and semi-dependentcare environments.

BradleyCorporation, the industry's leading manufacturer of premium quality commerciallavatories and lavatory faucets, serves a diverse customer base ranging fromlocal business facilities to international corporations like Wal-Mart, GeneralMotors, U.S. Postal Service, W.W. Grainger, AMC Theaters Corporation.

Architects, engineers, and specifiers look to BradleyCorporation for innovation in design and leadership in the development ofenvironmentally conscious products.?Bradley Corporation, a member of the U.S. Green Building Council, theWisconsin Green Building Alliance, has several products earning certificationby GREENGUARD Environmental Institute, and GREENGUARD Children and Schoolsprogram.

Bradleyeases the specifying process with a seasoned customer service staff and a rangeof helpful information tools on an advanced website.? For example, easy-to-use sizing software,available on Bradley's website, allows engineers to quickly determine thecorrect size thermostatic mixing valves.

Bradley is the industry leaderin the manufacture of premium quality commercial plumbing fixtures, valves,TMVs and washroom accessories that appear in the following CSI MasterFormat? sections:

Section 10 21 13? TOILET COMPARTMENTS (Mills^? Metal, Plastic-laminate, Phenolic, andPlastic units)

Section 10 28 13.13? COMMERCIAL TOILET ACCESSORIES (Institutional and commercial accessories)

Section 10 28 13.19? HEALTHCARE TOILET ACCESSORIES (Patient care accessories)

Section 10 28 13.21? WARM AIR DRYERS (Aerix^? hand dryers)

Section 10 28 13.63? DETENTION TOILET ACCESSORIES

Section 10 28 16? BATH ACCESSORIES (Hospitality and commercial bath accessories)

Section 10 51 26? PLASTIC LOCKERS (Lenox^? Plastic Lockers)

Section 22 11 19? DOMESTIC WATER PIPING SPECIALTIES (Thermostatic mixing valves)

Section 22 42 16.01? COMMERCIAL LAVATORIES AND FAUCETS (Express^? and Frequency^?Single and multi-station lavatories)

Section 22 42 16.02? COMMERCIAL LAVATORIES AND FAUCETS (Advocate^? lavatories)

Section 22 42 16.03? COMMERCIAL LAVATORIES AND FAUCETS (Verge? lavatories)

Section 22 42 16.04? COMMERCIAL LAVATORIES AND FAUCETS (OmniDecks? lavatories)

Section 22 42 16.11? COMMERCIAL SINKS AND FAUCETS

Section 22 42 23? COMMERCIAL SHOWERS AND SHOWER VALVES

Section 22 42 33? WASHFOUNTAINS (Sentry?, BradMate?, and Classic wash fountains)

Section 22 43 00 ? HEALTHCARE PLUMBINGFIXTURES (Patient care lavatory units)

Section 22 45 00? EMERGENCY PLUMBING FIXTURES (Halo? Emergency eyewash fixtures and showers)

Section 22 46 00? SECURITY PLUMBING FIXTURES

ContactBradley Corporation, Menomonee Falls, WI 53051; Phone: 800-BRADLEY ((800) 272‑3539)Fax:? (262) 251-5817, or visit theBradley web site www.bradleycorp.com.

BradleyCorporation is an AIA/CES registered provider offering several programs earningHS&W Learning Units; several qualify for sustainable design (SD) credit.? Contact Bradley to arrange for an office orassociation meeting presentation.

Mills^?, Aerix^?, Lenox^?,Express^?, Frequency^?, and Advocate^? areregistered trademarks of Bradley Corporation.

Verge?, OmniDeck?, Sentry?, BradMate?, andHalo? are trademarks of Bradley Corporation.

SECTION 22 43 13
HEALTHCARE PLUMBING FIXTURES

PART 1 - GENERAL

1.1 SECTION INCLUDES

A. Combination lavatory/watercloset patient care modules.

B. Hose boxes and dialysis boxes

1.2 RELATED SECTIONS

Specifier:? If retaining this optional article, delete relatedsections below that do not apply to this project.

1. Division 22 Section"Domestic Water Piping Specialties" for thermostatic mixing valves.

2. Division 22 Section"Commercial Lavatories and Faucets" for lavatories and lavatory decks.

3. Division 22 Section"Commercial Sinks and Faucets" for service sinks.

4. Division 22 Section"Emergency Plumbing Fixtures" for emergency fixtures.

5. Division 22 Section"Security Plumbing Fixtures" for security lavatories.

1.3 REFERENCES:

Specifier:? If retaining this optional article, deletereferences below that do not apply to this project.

A. American National StandardsInstitute (ANSI):

1. ANSI/ICPA-SS-1-2001

2. ANSI Z124

3. ANSI Z124.3

4. ANSI Z124.6

B. American Society of MechanicalEngineers (ASME):

1. ASME A112.18.1/CSA B125.1

2. ANSI/ASME A112.19.2

C. ASTM International (ASTM):

1. ASTM A 1008/A 1008M - StandardSpecification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-StrengthLow-Alloy, High-Strength Low-Alloy with Improved Formability, SolutionHardened, and Bake Hardenable

2. ASTM A 153/A153M - StandardSpecification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

3. ASTM A 167 - StandardSpecification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate,Sheet, and Strip

4. ASTM A 240 - StandardSpecification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet,and Strip for Pressure Vessels and for General Applications

5. ASTM A 653/A 653M - StandardSpecification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-IronAlloy-Coated (Galvannealed) by the Hot-Dip Process

6. ASTM A 666 - StandardSpecification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet,Strip, Plate, and Flat Bar

7. ASTM A 743/A 743M - StandardSpecification for Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application

8. ASTM B 221 - StandardSpecification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire,Profiles, and Tubes

9. ASTM D 570 - Standard TestMethod for Water Absorption of Plastics

10. ASTM D 638 - Standard Test Method for Tensile Properties ofPlastics

11. ASTM D 696 - Standard Test Method for Coefficient of Linear ThermalExpansion of Plastics Between -30?C and 30?C With a Vitreous Silica Dilatometer

12. ASTM D 785 - Standard Test Method for Rockwell Hardness of Plasticsand Electrical Insulating Materials

13. ASTM E 84 - Standard Test Method for Surface BurningCharacteristics of Building Materials

14. ASTM G 21 - Standard Practice for Determining Resistance ofSynthetic Polymeric Materials to Fungi

15. ASTM G 22 - Standard Practice for Determining Resistance ofPlastics to Bacteria

D. Canadian Standards Association(CSA)

1. CSA B45 - Plumbing Fixtures

E. GREENGUARD EnvironmentalInstitute (GEI):

1. GREENGUARD listed and certifiedlow emitting products

F. International Association ofPlumbing and Mechanical Officials (IAPMO):

1. IAPMO IGC 156 - Wash Fountainsand Lavatory Systems With or Without Water Closets

2. Universal Plumbing Code (cUPCboth U.S. and Canada)

G. NSF International (NAF):

1. NSF 61 - Certified DrinkingWater System Components

H. US Green Building Council(USGBC):

1. LEED Green Building RatingSystem

1.4 ACTION SUBMITTALS

A. Product Data:? For each product:

1. Manufacturer's data sheetsindicating operating characteristics, materials and finishes.

2. Include details of electricaland mechanical operating parts.

3. Provide mounting requirementsand rough-in dimensions.

4. Mark each sheet with productdrawing designation.

CoordinateLEED Submittals article with Division 01 requirements where applicable.

Bradley Corporation's TerreonRE recycled solid surfacematerial contains 25-percent preconsumer recycled content and 8-percent rapidlyrenewable material. ?Use of recycledmaterials in plumbing components is in addition to LEED credit requirements.

B. LEED Submittals:

1. Product Data for [Credit WE 2] [and] [Credit WE 3]:? Documentation indicating compliance withwater efficiency requirements.

2. Product Data for Credit MR4:? Documentation indicating percentagesby weight of preconsumer and postconsumer recycled content, including statementindicating cost for each product having recycled content.

3. Product Data for Credit IEQ4.4:? Documentation for adhesives andcomposite wood products indicating products contain no urea formaldehyde.

C. Samples for InitialSelection:? For material, finish, andcolor selections.

D. Samples for Verification:? For each countertop, lavatory, casework, andfixture selection, in manufacturer's standard sample size.

1.5 INFORMATION SUBMITTALS

A. Sample warranty.

1.6 CLOSEOUT SUBMITTALS

A. Operation, care and cleaninginstructions.

1.7 QUALITY ASSURANCE

A. Comply with NSF 61,Drinking Water System Components ? Health Effects.

B. Low-Emitting Material:? Solid surface material GREENGUARD-certifiedor comparable certification acceptable to Architect.

1.8 WARRANTY

A. Special Manufacturer?sWarranty:? Provide manufacturer'sstandard form in which manufacturer agrees to repair or replace products thatfail in materials or workmanship.

1. Solid Surface Material:? 10 years.

2. Other Products:? One year.

PART 2 - PRODUCTS

2.1 MANUFACTURERS

A. Basis-of-Design Products:? Provide healthcare plumbing fixtures manufacturedby Bradley Corporation, Menomonee Falls, WI 53051, (800) 272-3539; Email info@BradleyCorp.com;? Website www.bradleycorp.com.

Specifier:? Retain one of two paragraphs below based uponProject requirements.

1. Substitutions:? Submit requests for substitution inaccordance with Instructions to Bidders and Division 01 General Requirements.

2. Substitutions:? Provide specified product; Owner will notconsider substitution requests.

B. MATERIALS

Specifier:Terreon^?, Bradley's premium densified solid surface vandal-resistantmaterial, is noted for its excellent resistance to chemicals, stains, burns andimpacts. Surface damage can be easily repaired with everyday cleansers or finegrit abrasives.? Bradley's unique TerreonRE incorporates recycled contentand bio-based material in solid surface material.

Retainmaterials in first three paragraphs below based upon patient care unit(s)specified for project.

C. Solid Surface Material:? Fabricate indicated plumbing fixtures fromthermoset acrylic modified polyester resin certified by approved independenttesting agency as complying with ANSI/ICPA‑SS-1-2001, ANSI Z124.3, andANSI Z124.6, with the following minimum properties:

1. Basis of Design Product:? Bradley,[Terreon] [TerreonRE].

2. Recycled Content:? Preconsumer:?Minimum 25 percent.

3. Low-Emitting Materials:? GreenGuard-certified.

4. Thickness:? 1/2 inch (13 mm), minimum.

5. Fire Resistance, ASTME 84:? Class 1.

6. Hardness, ASTMD 785:? 55-60.

7. Liquid Absorption, ASTMD 570: ?0.025 percent in 24 hours.

8. Tensile Strength, ASTMD 638:? 5000 psi (34 MPa), minimum.

9. Thermal Expansion, ASTM D 696:? 2.30.

D. Cultured Marble:? Fabricate indicated plumbing fixturescertified by qualified independent testing agency to conform to ANSI Z124series when tested for product characteristics, with the following minimumproperties:

1. Lavatories:? ANSI Z124.3.

2. Sinks:? ANSI Z124.6.

3. Fungal and Bacterial Resistance:Surface do not support fungal and bacterial growth as tested in accordance withASTM G 21 and ASTM G 22.

Specifier:? Retain below if required by authoritieshaving jurisdiction.

4. Surface BurningCharacteristics:? Tested according toASTM E 84 (NFPA 255):

a. Flame-Spread Index:? 25 or less.

b. Smoke-Developed Index:? 450 or less.

E. Solid Laminate:? Colored melamine bonded under high pressureto phenolic core.? Exposed edges machinedsmooth to a uniform dark finish, without creases or ripples.

F. Stainless Steel Shapes:? ASTM A 167 Type 304, satin finishexposed surfaces unless otherwise indicated.

G. Stainless Steel Sheet:? ASTM A 240 or ASTM A 666, 300-series;satin finish exposed surfaces unless otherwise indicated.

H. Stainless Steel Castings:? ASTM A 743/A 743M.

I. Steel Sheet:? ASTM A 1008/A 1008M,Designation CS, manufacturer?s standard thickness.

J. Galvanized-Steel Sheet:? ASTM A 653/A 653M, with G60hot-dip zinc coating, manufacturer?s standard thickness.

K. Galvanized-Steel MountingDevices:?ASTM A 153/A 153M, hot-dip galvanized after fabrication.

L. Aluminum:? ASTM B 221.

M. Fasteners:

1. Exposed:? Screws, bolts, and other devices of samematerial as accessory unit and tamper-and-theft resistant.

2. Concealed:? Galvanized steel.

2.2 PATIENT CARE UNITS

Bradley'sLavatory/Water Closet Comby Model LC500 is a combination lavatory/water closetmodule featuring a compact design for retrofit or new construction.? Constructed with durable epoxy-coatedstainless steel cabinetry including large, conveniently located access panelsfor easy installation and maintenance.?Includes a fixed water closet with optional roll-away cover/exam seat.

A. Combination Lavatory WaterCloset Module [PCU#__]:? Stainless steel stationary cabinet withcountertop, integral lavatory bowl, faucet, and stationary water closet.

1. Basis of Design Product:? BradleyCorp., Model LC500 Patient Care Unit.

2. Unit Size:? 29 inch(737 mm) wide by 33-1/2 inch (845mm) deep with 36-1/8 inch (917 mm)high countertop.

Specifier:? Almond epoxy coated cabinet is standard;other finishes listed are optional. Fixed grab bar is standard.?

3. Cabinet:? Stainless steel sheet, 0.078 inch/14ga (1.98 mm) thick, with access panels on threesides.

a. Finish:? [Almond epoxy coating] [Gray epoxy coating] [Whiteepoxy coating][No.4 brushed directional polish].

4. Countertop:? [Cultured marble cast polymer] [Stainlesssteel, No. 4 brushed directional polish], with 8 by 10 inch (203 by 254 mm) bowl.

Specifier:? Wristblade faucet operators are standard.? Sensor-operated units require separatethermostatic mixing valve. ?Sensor-operationnot available with stainless steel countertop option.

5. Faucet:? Rigid gooseneck, 10 inch (254 mm) high.

a. Valve Operator:? [Wristblade handles] [Foot pedal] [Sensor-operated, 120 VAC] [Sensor-operated,DC battery-powered].

6. Water Closet: ?Low-flush 1.6 gal. (6.1 L) flush siphon-jet type with elongated bowl, integralflushing rim, and pushbutton-operated hydraulic flushing.? Formed from 0.078 inch/14 ga (1.98 mm) and 0.062 inch/16 ga (1.59 mm) stainless steel sheet.? Fully enclosed trap with 3-1/2inch (88.9 mm) seal passing 2-1/8inch (54.0 mm) diameter ball.? White seat with cover with self-sustaininghinge.? Static load capacity 5,000 lb (2268 kg).? Complies with ANSI/ASME A112.19.2.

a. Configuration:? [Left side WC] [Right side WC] [Asindicated on Drawings].

b. Waste Outlet:? [Wall] [Floor].

7. Toilet Tissue Holder:? Recessed, with shroud.

8. Grab Bar:? Fixed, on cabinet face.

Specifier:? Following three subparagraphs describeoptional accessories.

9. Bedpan Washer:? With [volume control valve] [hand lever control] [footpedal control].

10. Water Closet Cover/Exam Stool:?Roll-away type; match cabinet finish.

11. Additional Grab Bar: ?[Swing-down,35 inch (889 mm)] [Wall-mounted,48 inch (1219 mm)].

Bradley's Lavatory/Water Closet Comby Model LC700 offers plastic laminate, stainless steel, or Bradley's 24-colorTerreon solid surface and TerreonRE recycled solid surface GREENGUARD-certifiedcountertop materials as options, with a compact plastic-laminate clad cabinetwith unlimited color options.? This unitfeatures a leak-proof swing out stainless steel water closet with foot-operatedpedal release and wall or floor waste outlet. Choice of several bedpan washerand dialysis box combination options.

B. Combination Lavatory WaterCloset Module [PCU#__]:? Plastic-laminate-clad stationary cabinet withcountertop, lavatory and faucet, and swing-out water closet.

1. Basis of Design Product:? BradleyCorp., Model LC700 Patient Care Unit.

2. Unit Size:? 40-1/2 inch (1029 mm) wide by 17-3/8 inch (438 mm) deep (closed) with 36 inch ?(914 mm) highcountertop.

Specifier:? Formica #925 Champagne plastic laminatecabinet is standard; Formica, Wilsonart, or Nevamar brand plastic laminateselections are available.

3. Cabinet:? Stainless steel frame with 0.75-inch (1.98-mm) thick, plastic-laminate-clad plywood panels andstainless steel toe kick, with storage compartment with removable shelf sizedto accommodate two bed pans.

a. Doors:? Plastic-laminate-clad plywood panels with 250 lb. (113 kg) static load rating withstainless steel continuous hinges.

b. Pattern and finish:? [Formica #925 Champagne] [As selected from manufacturer'sfull range].

Specifier:? Retain countertop material from one of three"Countertop" paragraphs below; retain and edit corresponding"Colors" subparagraph.

4. Countertop: ?Plastic laminate on medium-density fiberboardwith drop-in, self-rim stainless steel lavatory 14-1/2 by 9-1/2by 5 inch (368 by 241 by 127 mm) deep, with backsplash [andside splashes as indicated].

a. Colors:? [Wilsonart #4633 Natural Nebula] [Asselected from manufacturer's full line].

5. Countertop:? [Solid surface with integral lavatory bowl ] [Highrecycled-content solid surface with integral bowl] 16-3/4 by 9-1/2by 8 inch (425 by 241 by 203 mm) deep with IV drip ledge,with backsplash [and side splashes as indicated].

a. Top and Bowl Colors:? [As selected from manufacturer's standard line] [Asselected from manufacturer's full line].

6. Countertop:? Stainless steel with drop-in, self-rimstainless steel lavatory 14-1/2 by 9-1/2 by 5 inch (368 by 241 by 127 mm) deep, with backsplash [andside splashes as indicated]; #4 directional polishfinish.

Specifier:? Wristblade faucet operators are standard. ?Sensor-operated units require separatethermostatic mixing valve. Sensor-operation not available with stainless steelcountertop option.

7. Faucet:? Rigid gooseneck, 10 inch (254 mm) high.

a. Valve operator:? [Wristblade handles] [Foot pedal] [Sensor-operated, 120 VAC] [Sensor-operated,DC battery-powered].

8. Water Closet:? Low-flow 1.6 gal. (6.1 L) flush siphon-jet type with elongated bowl, integralflushing rim, and pushbutton-operated hydraulic flushing.? Formed from 0.078-inch/14 ga (1.98-mm) and 0.062-inch/16 ga (1.59-mm) stainless steel sheet.? Fully enclosed trap with 3-1/2inch (88.9 mm) seal passing 2-1/8inch (54.0 mm) diameter ball.? White seat with cover with self-sustaininghinge.? Toilet pivots into room and locksin position when cabinet door is open.? Staticload capacity 5,000 lb (2268 kg).? Complies with ANSI/ASME A112.19.2.

a. Configuration:? [Left side WC] [Right side WC] [Asindicated on Drawings].

b. Waste Outlet:? [Wall] [Floor].

9. Toilet Tissue Holder:? Inside door-mounted.

Specifier:? Following subparagraphs describe optionalaccessories.

10. Grab Bar: ?[Swing-down, 35inch (889 mm)] [Wall-mounted, 48 inch (1219 mm)].

Specifier:? Select one of five options below.

11. Bedpan Washer:? With [volume control valve] [handlever control][footpedal control].

12. Dialysis box:? [Single valve] [Dualvalve].

13. Combination dialysis box and bedpan washer with volume control valve.

14. Combination dialysis box and bedpan washer with foot pedal control valve.

15. Storage box.

Bradley's Lavatory/Water Closet Comby Model LC750 offers plastic laminate, stainless steel, or Bradley's 24-colorTerreon solid surface and TerreonRE recycled solid surface GREENGUARD-certifiedcountertop materials as options, with a plastic-laminate clad cabinet withunlimited color options.? This unitfeatures a leak-proof swing out stainless steel water closet with foot-operatedpedal release and wall or floor waste outlet. Unit includes bedpan washer inseparate compartment, and optional dialysis box.

C. Combination Lavatory WaterCloset Module [PCU#__]:? Plastic-laminate-clad stationary cabinet withcountertop, lavatory and faucet, swing-out water closet, and bedpan washer withdrain in separate compartment.

1. Basis of Design Product:? BradleyCorp., Model LC750 Patient Care Unit.

2. Unit Size:? 47-1/2 inch (1194 mm) wide by 17-3/8 inch (438 mm) deep (closed) with 36 inch (914 mm) high countertop.

Specifier:? Formica #925 Champagne plastic laminatecabinet is standard; Formica, Wilsonart, or Nevamar brand plastic laminateselections are available.

a. Doors:? Plastic-laminate-clad plywood panels with 250 lb. (113 kg) static load rating withstainless steel continuous hinges.

b. Pattern and finish:? [Formica #925 Champagne] [As selected from manufacturer'sfull range].

Specifier:? Retain countertop material from one of three"Countertop" paragraphs below; retain and edit corresponding"Colors" subparagraph.

a. Colors:? [Wilsonart #4633 Natural Nebula] [Asselected from manufacturer's full line].

a. Top and Bowl Colors:? [As selected from manufacturer's standard line] [Asselected from manufacturer's full line].

Specifier:? Wristblade faucet operators arestandard.? Sensor-operated units requireseparate thermostatic mixing valve. Sensor-operation not available withstainless steel countertop option.

7. Faucet:? Rigid gooseneck, 10 inch (254 mm) high.

a. Valve operator:? [Wristblade handles] [Foot pedal] [Sensor-operated, 120 VAC] [Sensor-operated,DC battery-powered].

8. Water Closet:? Low-flush 1.6 gal. (6.1 L) flush siphon-jet type with elongated bowl, integralflushing rim, and pushbutton-operated hydraulic flushing.? Formed from 0.078-inch/14 ga (1.98-mm) and 0.062-inch/16 ga (1.59-mm) stainless steel sheet.? Fully enclosed trap with 3-1/2inch (88.9 mm) seal passing 2-1/8inch (54.0 mm) diameter ball.? White seat with cover with self-sustaininghinge.? Toilet pivots into room and locksin position when cabinet door is open.?Static load capacity 5,000 lb (2268kg).? Complies with ANSI/ASMEA112.19.2.

a. Configuration:? [Left side WC] [Right side WC] [Asindicated on Drawings].

b. Waste Outlet:? [Wall] [Floor].

9. Toilet Tissue Holder:? Inside door-mounted.

10. Bedpan Washer:? With [volumecontrol valve][handlever control][footpedal control].

Specifier:? Select one of two options below.

11. Dialysis box:? [Single valve] [Dualvalve].

12. Storage box.

Specifier:? Following subparagraph describes optionalaccessories.

13. Grab Bar:? [Swing-down, 35inch (889 mm)] [Wall-mounted, 48 inch (1219 mm)].

Bradley's Lavatory/Water Closet Comby Model LC800 offers plastic laminate, stainless steel, or Bradley's 24-colorTerreon solid surface and TerreonRE recycled solid surface GREENGUARD-certifiedcountertop materials as options, with a plastic-laminate clad cabinet withunlimited color options.? This unitfeatures a fixed stainless steel or china water closet with wall or floor wasteoutlet and optional roll-away cover/exam seat. Unit includes bedpan washer inseparate compartment, and optional dialysis box.

D. Combination Lavatory WaterCloset Module [PCU#__]:? Plastic-laminate-clad stationary cabinet withcountertop, lavatory and faucet, fixed water closet, and bedpan washer withdrain in separate compartment. IAPMO approved.?Complies with IGC 156, CSA B45 Series, and ASME A112.18.1/CSA B125.1.

1. Basis of Design Product:? BradleyCorp., Model LC800 Patient Care Unit.

2. Unit Size:? 47 inch(1194 mm) wide by 30-7/8 inch (784mm) deep (closed) with 36 inch (914mm) high countertop.

Specifier:? Formica #925 Champagne plastic laminatecabinet is standard; Formica, Wilsonart, or Nevamar brand plastic laminateselections are available.

3. Cabinet:? Stainless steel frame with 0.75-inch (19-mm) thick, plastic-laminate-clad plywood panels andstainless steel toe kick.

a. Doors:? Plastic-laminate-clad plywood panels with 250 lb. (113 kg) static load rating withstainless steel continuous hinges.

b. Pattern and finish:? [Formica #925 Champagne] [As selected from manufacturer'sfull range].

Specifier:? Retain countertop material from one of three"Countertop" paragraphs below; retain and edit corresponding"Colors" subparagraph.

a. Colors:? [Wilsonart #4633 Natural Nebula] [Asselected from manufacturer's full line].

a. Top and Bowl Colors:? [As selected from manufacturer's standard line] [Asselected from manufacturer's full line].

Specifier:? Wristblade faucet operators arestandard.? Sensor-operated units requireseparate thermostatic mixing valve. Sensor-operation not available withstainless steel countertop option.

7. Faucet:? Rigid gooseneck, 10 inch (254 mm) high.

a. Valve operator:? [Wristblade handles] [Foot pedal] [Sensor-operated, 120 VAC] [Sensor-operated,DC battery-powered].

8. Water Closet:? Low-flush 1.6 gal. (6.1 L) flush siphon-jet type with elongated bowl, integralflushing rim, and pushbutton-operated hydraulic flushing.? Fully enclosed trap with 3-1/2inch (88.9 mm) seal passing 2-1/8inch (54.0 mm) diameter ball.? White seat with cover with self-sustaininghinge.? Height meet ADArequirements.? Complies with ANSI/ASMEA112.19.2.

a. Material:? White china, with bedpan lugs.

b. Material:? Stainless steel sheet, with static loadcapacity 5,000 lb (2268 kg).

c. Configuration:? [Left side WC] [Right side WC] [Asindicated on Drawings].

d. Waste Outlet:? [Wall] [Floor].

9. Toilet Tissue Holder:? Inside door-mounted.

10. Bedpan Washer:? With [volumecontrol valve][handlever control][footpedal control].

Specifier:? Select dialysis box or storage boxsubparagraph below.

1. Dialysisbox:? [Single valve] [Dualvalve].

2. Storage box.

Specifier:? Following two subparagraphs describe optionalaccessories.

3. Water Closet Cover/ExamStool:? Roll-away type; match cabinetfinish.

4. Grab Bar: ?[Swing-down, 35 inch (889 mm)] [Wall-mounted, 48 inch (1219 mm)].

Bradley's Lavatory/Water Closet Comby Model LC840 offers a sleek, contemporary design compact unit in 40 inches offloor space, with a plastic-laminate-clad cabinet and choice of plasticlaminate, stainless steel, or Bradley Terreon or TerreonRE countertops.? This unit features a fixed stainless steel watercloset with wall or floor waste outlet and optional roll-away cover/exam seat.Unit includes bedpan washer in separate compartment, and optional dialysis box.

E. Combination Lavatory WaterCloset Module [PCU#__]:? Contemporary design, compact plastic-laminate-cladcabinet with countertop, lavatory and faucet, fixed water closet with fold-downseat cover, and bedpan washer with drain in separate compartment. IAPMOapproved.? Complies with IGC 156, CSA B45Series, and ASME A112.18.1/CSA B125.1.

1. Basis of Design Product:? BradleyCorp., Model LC840 Patient Care Unit.

2. Unit Size:? 40 inch(1016 mm) wide by 32-1/4 inch (819mm) deep (closed) with 36 inch (914mm) high countertop.