SECTION 22 40 00 ? PLUMBING FIXTURES

Specifier notes are shown in italics and should be deleted from the final document. Generally all of the manufacturer?s products in this category are listed and the specifier must take care to delete those products not included in the project.

Depending on the relative complexity of the project, the specifier may choose to combine two or more Compartment and Cubicle Sections into one Section, Section 10150 Compartments and Cubicles, corresponding to the CSI MasterFormat? .

Edit each Article in this Section to suit project requirements.

Bradley PlumbingFixtures

Bradley is theindustry?s leading manufacturer of premium-quality commercial plumbing fixturesand washroom accessories. Bradley serves a diverse customer base ranging fromsmall local facilities to international corporations such as WalMart, GeneralMotors, U.S. Postal Service, W.W. Grainger, and AMC Theaters Corp. The companyboasts the greatest breadth of commercial plumbing products in the world.Architects and specifiers look to Bradley for innovative products in categoriessuch as:

Washfountains?? Security Plumbing Fixtures

Multi-Station Lavatory Systems??? Terreon? Solid SurfaceProducts

Patient Care Lavatory Units??? Commercial Faucets

Commercial & Group Showers???? Washroom Accessories

Solid Plastic Locker Systems? Washroom Partitions

Emergency Eyewash Fixtures andDrench Showers?????

Bradley makes iteasy to specify these products through a seasoned customer service staff andthe best informational tools in the industry. Bradley is proud to be anAIA CES Registered Provider. For information on Bradley educationprograms, click here.We recommend you consult with your regional Bradley representative, who can becontacted through: Bradley Corporation, Menomonee Falls, WI,800‑BRADLEY (800‑272-3539), Email: ?info@bradleycorp.com,Website:? www.bradleycorp.com.

Bradley iscommitted to the continuous improvement of our environmental management systemand performance including resource conservation and pollution prevention. Weare a member of the USGBC and have implemented many internal procedures toreduce waste and conserve resources in our manufacturing processes as well ascontinue to introduce products that support LEED credits.

Bradley productsappear in the following CSI MasterFormat 2004? Sections:

?? Section 10 21 13 ? ToiletCompartments

?? Section 10 51 26 ? PlasticLockers

?? Section 10 28 00 ? Toilet, Bath, and Laundry Accessories?????

?? Section 10 28 14 ?Detention Toilet Accessories

?? Section 22 11 19? Domestic Water Piping Specialties

?? Section 22 40 00 ? PlumbingFixtures

?? Section 22 43 00 ? HealthcarePlumbing Fixtures

?? Section 22 45 00 ? EmergencyPlumbing Fixtures

?? Section 22 46 00 ? SecurityPlumbing Fixtures

Specifier: Thespecifier may select CSI MasterFormat 95 or MasterFormat 2004 section numberingas required.

SECTION 22 40 00 ? PLUMBING FIXTURES

SECTION 15400 ? PLUMBING FIXTURES

PART 1 - GENERAL

Specifier:? Edit paragraphs below to correspond to scopeof project.

1.1 SECTION INCLUDES

A. Lavatories.

B. Sinks.

C. Washfountains.

D. Showers.

E. Faucets.

F. Water closets.

G. Urinals.

Specifier:? Edit paragraphs below to correspond toproject. Delete Article if not required.

1.2 RELATED SECTIONS

A. Division 22 Section "Domestic Water PipingSpecialties."

B. Division 22 Section "HealthcarePlumbing Fixtures."

A. Division 22 Section "Emergency PlumbingFixtures."

B. Division 22 Section "Security PlumbingFixtures."

Specifier: Retainreferences below remaining in section following editing. For projects oflimited scope, delete Article.

1.3 REFERENCES

A. American National Standards Institute (ANSI):

1. ANSI Z124.3 - Plastic Lavatories.

2. ANSI Z 124.6 - Plastic Sinks.

3. ANSI/ICPA SS-1-2001 - Performance Standard forSolid Surface Materials.

B. American Society of Sanitary Engineering (ASSE):

1. ASSE 1014 - Hand-Held Showers.

2. ASSE 1016 - Individual Thermostatic, Pressure Balancingand Combination Pressure.

C. ASMEInternational (ASME):

1. ASME A112.18.1 - Plumbing Fixture Fittings.

2. ASME A112.18.2 - Plumbing Fixture Waste Fittings.

3. ASME A112.18.3M - Performance Requirements for BackflowProtection Devices and Systems in Plumbing Fixture Fittings.

4. ASME A112.19.1M - Enameled Cast Iron Plumbing Fixtures.

5. ASME A112.19.2M - Vitreous ChinaPlumbing Fixtures.

6. ASME A112.19.4M - Porcelain Enameled Formed SteelPlumbing Fixtures.

D. ASTM International (ASTM):

1. ASTM E 84 - Standard Test Method for SurfaceBurning Characteristics of Building Materials.

2. ASTM D 570 - Standard Test Method for WaterAbsorption of Plastics.

3. ASTM D 638 - Standard Test Method for TensileProperties of Plastics.

4. ASTM D 696 - Standard Test Method forCoefficient of Linear Thermal Expansion of Plastics Between -30 degrees C and30 degrees C With a Vitreous Silica Dilatometer.

5. ASTM D 785 - Standard Test Method for RockwellHardness of Plastics and Electrical Insulating Materials.

E. Canadian Standards Association (CSA):

1. CSA B125 - (See ASME A112.18.1 - Plumbing Fixture Fittings).

F. International Association of Plumbing andMechanical Officials (IAPMO):

1. UniformPlumbing Code (UPC).

G. International Code Council (ICC):

1. ICC/ANSI A117.1 ? Accessible and UsableBuildings and Facilities.

H. National Fire Protection Association (NFPA):

1. NFPA 70 - National Electrical Code.

I. NSF International (NSF):

1. NSF 61 - Drinking Water System Components -Health Effects.

J. State of Texas:

1. Texan Accessibility Standards (TAS).

K. Underwriters Laboratories, Inc.

1. UL 723 - Test For Surface BurningCharacteristics of Building Materials.

2. UL 1951 - Electric Plumbing Accessories.

L. United States Green BuildingCouncil (USGBC):

1. LEED Green Building Rating System (LEED).

M. US Federal Government:

1. Public Law 90-480 - Architectural Barriers Act. 1968 (ABA).

2. Public Law 101-336 - Americans with Disabilities Act.1990.

3. Public Law 102-486 - Energy Policy Act. 1992.

4. U.S.Architectural & Transportation Barriers Compliance Board. Americans withDisabilities Act (ADA),Accessibility Guidelines for Buildings and Facilities (ADAAG).

1.4 SUBMITTALS

A. Product Data:?Manufacturer?s data sheets, installation instructions, and maintenancerecommendations.

B. Product Test Reports:? Indicating compliance of products with requirements,from a qualified independent testing agency, when requested by Architect.

C. Shop Drawings:?Prepared by manufacturer. Include rough-in requirements and power,signal, and control wiring diagrams.

D. Operation and Maintenance Data.

Specifier: Retainapplicable paragraphs below for projects intended to be LEED-certified. Verifycredits required.

E. LEED Submittals:

1. Credits WE 3.1/3.2:? Provide product data and site inspectionreports verifying plumbing fixture water flow performance meets design requirements.

2. Credit ID 1:? Provide product data and test resultsdocumenting performance of photovoltaic cell-powered sensor-controlled faucetsystem.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications:? Approved manufacturer listed in this section,with minimum [5] yearsexperience in the manufacture of plumbing fixtures. Manufacturers seekingapproval must submit the following:

1. Product data, including test data from qualifiedindependent testing agency indicating compliance with requirements.

2. Samples of each component of product specified.

3. List of successful installations of similarproducts available for evaluation by Architect.

4. Submit substitution request not less than 15days prior to bid date.

B. Source Limitations:? Obtain each type of plumbing fixture andcompatible accessories through one source from a single approved manufacturer.

Specifier: Bradleyoffers handicapped-accessible fixtures meeting requirements of ADA, ICC A117.1, and Texas Accessibility Standards.

C. Accessibility Requirements: Comply withrequirements of ADA/ABA and with requirements of authorities havingjurisdiction.

D. Water Flow and Consumption Requirements: Complywith Public Law 102-486 "Energy Policy Act."

E. Drinking Water Standard: Comply with NSF 61,"Drinking Water System Components ? Health Effects," whereapplicable.

F. Electrical Components:? Listed and labeled per NFPA 70,Article 100, by a testing agency acceptable to authorities havingjurisdiction.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Deliver, store, and handle components ofsound-conditioned practice rooms in accordance with manufacturer?srecommendations. Ship to jobsite only after roughing-in, painting work, andother related finish work has been completed and installation areas are readyto accept units and recommended temperature and humidity levels will bemaintained during the remainder of construction.

PART 2 - PRODUCTS

2.1 MANUFACTURERS

A. Basis of Design:?Plumbing fixture selections are based upon the manufacturer below.Provide basis of design products[, or comparable product of a listed manufacturerapproved by the Architect prior to bid].

1. Bradley Corporation, Menomonee Falls, WI;Telephone: (800)272-3539; Email:? info@bradleycorp.com, Website:? www.bradleycorp.com.

2. [Specifier: Insert comparable manufacturers ifrequired.]

2.2 MATERIALS

Specifier: Belowdescribes Terreon?,Bradley's densified solid surface vandal-resistant material, noted for itsresistance to chemicals, stains, burns and impacts. Surface damage can be easilyrepaired with everyday cleansers or fine grit abrasives.

A. Solid Surface Material:? Where indicated as constructed of solidsurface material, fabricate plumbing fixtures from thermoset acrylic modifiedpolyester resin certified by approved independent testing agency as complyingwith ANSI/ICPA‑SS-1-2001, ANSI Z124.3, and ANSI Z124.6, with thefollowing minimum properties:

1. Thickness:?1/2 inch (13 mm), minimum.

2. Liquid Absorption:? 0.025 percent in 24 hours, per ASTM D 570.

3. Tensile Strength:? 5000 psi (34 MPa), minimum, per ASTM D 638.

4. Thermal Expansion:? 2.30, per ASTM D 696.

5. Hardness:?55-60, per ASTM D 785.

6. Fire Resistance:?Class 1, per ASTM E 84.

7. Basis of Design Product:? Bradley,Terreon?, or a comparable productfabricated from one of the following materials:

a. DuPont?, Corian? Products.

b. Wilsonart? International, Inc., Gibraltar?Products.

2.3 LAVATORIES, SINGLE-STATION

A. Wall-mounted, Accessible, Single-StationLavatory Fixture LAV#_: Constructed of solid surface material with circularbowl [andsoap dispenser].Unit includes waste and supply connections to wall with stop, strainer, andcheck valves [,concealed by ABS plastic access panel/trap cover] [, concealed by stainless steelaccess panel/trap cover].

1. Faucet: Sensor-operated, vandal-resistant lowprofile faucet, with 110/24 VAC plug-intransformer. Basis of Design Manufacturer/Model:? Bradley, Aerada? 900 Series Futura [specifier insert other faucet selection]

Specifier: Faucetabove is standard. See Faucet Article in this specification for other Bradleyfaucet options. Delete above and edit and retain below if spray head option isrequired

2. Spray Head:?Independent water stream former with flow rate of 0.5 gpm(0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).

Specifier: Selectone of three spray head valve operation options below. Select power sourceoption for infrared sensing module.

a. Spray Head Valve Operation:? Infrared sensing module and solenoid withadjustable turn off delay and automatic shut-off, [with 110/24 VAC plug-intransformer][batteryoperated].

b. Spray Head Valve Operation:? Pushbutton air valve metering with adjustabletiming.

c. Spray Head Valve Operation:? Light-touch, 10 second auto shutoff.

3. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

4. Color:? Asselected by Architect from manufacturer's full line.

5. Basis of Design Manufacturer/Model:? Bradley,Express Model SS-1N.

Specifier: Bradley Frequency?lavatory systems described below featurea concave or convex shape that creates a contemporary "wave" designwhen mounted side by side, the concave unit meeting accessibility requirementswhile the convex unit providing ergonomically-correct wash station height forother adult users. Frequency lavatories come in 26 colors and are equipped withsensor-controlled faucets, with optional soap dispensers, thermostatic mixingvalves, and point-of-use hot water heaters. Bradley also offers toweldispensers, mirrors, and waste receptacles with coordinated Frequency designfeatures ? specified in Division 10 Section "Toilet, Bath, and Laundry Accessories."

B. Wall-mounted, Accessible, Single-StationLavatory LAV#_:? Constructed of solidsurface material with [convex] [concave] contoured deck, integral ergonomic bowl, andcoved integral backsplash, with sensor faucets, [and liquid soap dispensers]. Unitincludes waste and supply connections to wall with stop, strainer, and checkvalves, and heavy-gage stainless steel support brackets, concealed by texturedpolystyrene trap enclosure.

1. Overall Unit Size:? 30by 22 inches (762 by 559 mm).

2. Bowl Size:? Rectangular with rounded front:? 17 by 13 inches (432 by 330 mm) on 30 inch (762 mm) center.

Bowl Height(Standard): Overall unit height adjustable to meet juvenile height requirementsand to comply with accessibility requirements of authorities havingjurisdiction. Specifier: Faucet below is standard. See Faucet Article in thisspecification for other Bradley faucet options.

3. Faucet:?With Infrared Sensor Metering Control[, with 110/24 VAC plug-intransformer][batteryoperated]:? Basis of Design Manufacturer/Model:? Bradley, [Aerada 1100 Series Low Arc] [specifier insert other faucetselection].

4. Liquid Soap Dispenser:? Vandal-resistant, deck-mounted infrared-controlleddispenser with removable filler collar: Basis of DesignManufacturer/Model:? Bradley, ModelNo. 6334.

5. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

6. Hot Water Heater:? Thermostatic electric tankless water heater withmicro-processing temperature control providing temperature accuracy of+/- 1 deg. F (0.56 deg. C), flow switch activated,with replacement cartridge element, providing minimum temperature rise of65 deg. F at 1 gpm (36 deg. C at 3.8 l/m).

a. Basis of Design Manufacturer/Model:? Bradley, Model [EX55TMLB, 23A/240VAC]? [EX60TMLB, 22A/277VAC].

7. Bowl/deck Color:?As selected by Architect from manufacturer's full line.

8. Trap Enclosure Color:? As selected by Architect from manufacturer'sfull line.

9. Basis of Design Manufacturer/Model:? Bradley,Frequency Lavatory System.

C. Wall-mounted, Accessible, Single-StationLavatory Fixture LAV#_: Constructed of solid surface material with wateroverflow and ledged back, drain, strainer, and tailpiece.

1. Fixture Size:?21 by 18 inch (533 by 457 mm).

2. Faucet:?Low-Profile Faucet with Infrared Sensor Metering Control[, with110/24 VAC plug-in transformer] [batteryoperated]. Basis of Design Manufacturer/Model:?Bradley, Aerada 900 Series Futura [specifier insert other faucet selection].

3. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

4. Color: As selected by Architect frommanufacturer's full line.

5. Basis of Design Manufacturer/Model:? Bradley,Terreon Imperial Lavatory TL-18.

D. Wall-mounted, Single-Station Stainless SteelFood Service Lavatory Fixture LAV#_:?Constructed of 300 stainless steel with safety angled corners, 8 inch(203 mm) backsplash, fast-install wall bracket, drain, strainer, and tailpiece.

1. Fixture Size:?18 by 17 3/16 inch (458 by 437 mm).

2. Faucet:?Sensor-Operated, Gooseneck Metering Faucet with Infrared Control [, with120/24 VAC plug-in transformer] [battery operated]. Basis of DesignManufacturer/Model:? Bradley, Aerada 1000Series Gooseneck.

3. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

4. Basis of Design Manufacturer/Model:? Bradley,Stainless Steel Food Service Lavatory.

Specifier: Retainand edit below for other types of single-station lavatory products whenrequired by project.

E. [Wall-mounted] [Wall-and-pedestal-mounted] [, Accessible] Lavatory LAV#_:? [Enameled cast-iron, ASME A112.19.1M] [Vitreouschina, ASME A112.19.2M]; Size:? 20 by 18 inches (508 by 457 mm);Color:? White.

1. Basis of Design Manufacturer/Model:? [Specifier:?insert manufacturer/model].

Specifier: Bradleymultiple-user lavatory systems described below are constructed of Terreonsolid-surface material. The lavatories serve up to 3 users at a time, handlingwashroom traffic quickly and economically while providing each user with theirown space. Lavatory bowls are positioned on 30 inch centers. The preassembledspray head modules are equipped with independent stream formers, each served bya separate infrared sensor or push-button. Standard flow rate of .5 GPM meetsindustry standard for water conservation while providing enough water to rinsehands quickly and efficiently. Operating range is 20-80 PSI.

Bradley multi-userlavatory decks are supported by a fully-enclosed stainless steel frame thathouses the lavatory P-trap and tailpiece, flexible stainless steel supplyconnections, optional Bradley Vernatherm thermostatic mixing valve withintegral strainers and external checkstops, and optional transformer forinfrared sensor control.

2.4 LAVATORIES, MULTIPLE USER SYSTEMS

Specifier: Bradley Express? SS-Series lavatory systems described below feature a Terreon continuous bowl with semi-circularwash stations. Express SS-Series lavatory systems are now available powered byBradley's innovative ndite? sustainable technology ? see note below.

Select floorsupported option when wall supported installation is not available.

A. [Wall-mounted, Floor-supported,] [Wall-mounted,]Accessible, [2] [3]Station Lavatory LAV#_:? Constructed ofsolid surface material with integral semi-circular continuous bowls, deck, andledge containing concealed, vandal-resistant spray head [and liquid soap dispenser]. Unitincludes waste and supply connections to wall with stop, strainer, and checkvalves, and stainless steel support frame, concealed by acrylic laminatepedestal enclosure. ADA/ABA, ANSI A117.1, and TAS compliant. IPC/cUPC-certifedby IAPMO.

1. Overall Unit Size:? [50 by 21-1/8 inch (1270 by537 mm) with 2 bowls] [80 by21-1/8 inch (2032 by 537 mm) with 3 bowls].

2. Bowl Size:? 16 inch (406 mm) diameter.

3. Spray Head:?Independent water stream former with flow rate of 0.5 gpm(0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).

Specifier: Selectone of three spray head valve operation options below. Select power sourceoption for infrared sensing module.

a. Spray Head Valve Operation:? Infrared sensing module and solenoid withadjustable turn off delay and automatic shut-off, [with 110/24 VAC plug-intransformer][batteryoperated] [withbattery-free integral photovoltaic power cell].

b. Spray Head Valve Operation:? Pushbutton air valve metering with adjustabletiming.

c. Spray Head Valve Operation:? Light-touch, 10 second auto shutoff.

4. Water Supply:?[Singletempered line][Single thermostatic mixing valve] ?

Specifier: If includingpoint-of-use hot water heater option below, select 95 series for 2-bowl unitsand 110 series for 3-bowl units.

5. Hot Water Heater:? Thermostatic electric tankless water heaterwith micro-processing temperature control providing temperature accuracy of+/- 1 deg. F (0.56 deg. C), flow switch activated,with replacement cartridge element, providing minimum temperature rise of65 deg. F at 1 gpm (36 deg. C at 3.8 l/m).

a. Basis of Design Manufacturer/Model:? Bradley, Model [EX95TMLB, 40A/240VAC] [EX100TMLB,36A/277VAC][EX110TMLB,46A/240VAC][EX110TMLB,40A/277VAC].

6. Bowl/Spray Head Color:? As selected by Architect from manufacturer'sfull line.

7. Pedestal Enclosure Color:? As selected by Architect from manufacturer'sfull line.

8. Accessories:?Matching solid surface material: [Extensions] [Purse Shelves] [Waste Receptacles] [Splashesand Aprons]as indicated.

9. Basis of Design Manufacturer/Model:?Bradley, Express Lavatory System, SS-series.

Specifier: Bradley Express? MG-Series lavatory systems described below feature a continuous bowl with contemporary flowing"wave" design wash stations and a matching contoured spray headshelf. The angle-formed wall mount pedestal completes the contemporary designof the MG-series.

Express MG-Serieslavatory systems are now available powered by Bradley's innovative ndite?sustainable technology ? see note below.

B. Wall-mounted, Accessible, [2] [3] Station Lavatory LAV#_:? Constructed of solid surface material withintegral wave-formed continuous bowl, contoured deck, and ledge containingconcealed, vandal-resistant spray head [and liquid soap dispenser]. Unit includes waste and supplyconnections to wall with stop, strainer, and check valves, and stainless steelsupport frame, concealed by acrylic laminate pedestal enclosure. ADA/ABA, ANSIA117.1, and TAS compliant. IPC/cUPC-certifed by IAPMO.

1. Overall Unit Size:? [54 by 22 inch (1372 by559 mm) with 2 bowls] [84 by21-1/8 inch (2134 by 537 mm) with 3 bowls].

2. Bowl Size:? 16-inch (406 mm) diameter.

3. Spray Head:?Independent water stream former with flow rate of 0.5 gpm(0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).

Specifier: Selectone of three spray head valve operation options below.

Select power sourcetype for infrared option. Third IR power source type is Bradley's patentedndite? sustainable technology using daylight or room lightingto eliminate need for batteries or separate electrical power source for sprayhead sensors.

b. Spray Head Valve Operation:? Pushbutton air valve metering with adjustabletiming.

c. Spray Head Valve Operation:? Light-touch, 10 second auto shutoff.

4. Water Supply:?[Singletempered line][Single thermostatic mixing valve]

Specifier: Ifincluding point-of-use hot water heater option below, select 95 series for2-bowl units and 110 series for 3-bowl units.

5. Hot Water Heater:? Thermostatic electric tankless water heaterwith micro-processing temperature control providing temperature accuracy of+/- 1 deg. F (0.56 deg. C), flow switch activated, withreplacement cartridge element, providing minimum temperature rise of65 deg. F at 1 gpm (36 deg. C at 3.8 l/m).

a. Basis of Design Manufacturer/Model:? Bradley, Model [EX95TMLB, 40A/240VAC] [EX100TMLB,36A/277VAC][EX110TMLB,46A/240VAC][EX110TMLB,40A/277VAC].

6. Bowl/Spray Head Color:? As selected by Architect from manufacturer'sfull line.

7. Pedestal Enclosure Color:? As selected by Architect from manufacturer'sfull line.

8. Accessories:?Matching solid surface material: [Extensions] [Purse Shelves] [Waste Receptacles] [Splashesand Aprons]as indicated.

9. Basis of Design Manufacturer/Model:? Bradley,Express Lavatory System, MG‑series.

Specifier: Bradley Frequency?lavatory systems described belowfeature two or three individual multi-height bowls in a continuous,contemporary "wave" design deck, meeting accessibility requirementswhile providing ergonomically-correct wash station height for other adultusers. Frequency lavatories come in 20 colors and are equipped withsensor-controlled faucets, with optional soap dispensers, thermostatic mixingvalves, and point-of-use hot water heaters. Bradley also offers toweldispensers, mirrors, and waste receptacles with coordinated Frequency designfeatures ? specified in Division 10 Section "Toilet, Bath, and Laundry Accessories."

C. Wall-mounted, Multi-Level, Accessible, [2] [3]Station Lavatory LAV#_:? Constructed ofsolid surface material with wave-formed contoured deck, integral ergonomicmulti-height bowls, and coved integral backsplash, with sensor faucets, [andliquid soap dispensers]. Unit includes waste and supply connections towall with stop, strainer, and check valves, and heavy-gage stainless steelsupport brackets, concealed by textured polystyrene trap enclosure.

1. Overall Unit Size:? [60 by 22 inches (1524 by 559 mm) with 2 bowls] [90 by22 inches (2286 by 559 mm) with3 bowls].

2. Bowl Size:? Rectangular with rounded front:? 17 by 13 inches (432 by 330 mm) on 30 inch (762 mm) centers.

3. Bowl Height (Standard):? Low bowl:?32 inch (813 mm); Highbowl:? 36 inch (914 mm), with overall unit height adjustable to meetjuvenile height requirements and to comply with accessibility requirements ofauthorities having jurisdiction.

Specifier: Faucetbelow is standard. See Faucet Article in this specification for other Bradleyfaucet options.

4. Faucet:?With Infrared Sensor Metering Control[, with 110/24 VAC plug-intransformer][batteryoperated]:? Basis of Design Manufacturer/Model:? Bradley, [Aerada 1100 Series Low Arc] [specifier insert other faucetselection].

5. Liquid Soap Dispenser:? Vandal-resistant, deck-mounted infrared-controlleddispenser with removable filler collar: Basis of DesignManufacturer/Model:? Bradley, ModelNo. 6334.

6. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

Specifier: Ifincluding point-of-use hot water heater option below, select 95 or 100 seriesfor 2-bowl units and 110 series for 3-bowl units.

7. Hot Water Heater:? Thermostatic electric tankless water heaterwith micro-processing temperature control providing temperature accuracy of+/- 1 deg. F (0.56 deg. C), flow switch activated,with replacement cartridge element, providing minimum temperature rise of65 deg. F at 1 gpm (36 deg. C at 3.8 l/m).

a. Basis of Design Manufacturer/Model:? Bradley, Model [EX95TMLB, 40A/240VAC] [EX100TMLB,36A/277VAC][EX110TMLB,46A/240VAC][EX110TMLB,40A/277VAC].

8. Bowl/deck Color:?As selected by Architect from manufacturer's full line.

9. Trap Enclosure Color:? As selected by Architect from manufacturer'sfull line.

10. Basis of Design Manufacturer/Model:? Bradley,Frequency Lavatory System.

Specifier: Bradley Express Crescent lavatory system described below features a space-saving,crescent-shaped bowl with semi-circular wash station and integral concealedspray heads serving multiple users, a low-profile flush deck for accepting anoptional soap dispenser, and an optional contoured pedestal enclosureconcealing supply connections, optional transformer, and trap. ADA and TAS compliant.

D. Wall-mounted, Accessible, [2] [3] Station Lavatory LAV#__:? Constructed of solid surface material withcompact, crescent-shaped, low-profile deck and ledge containing concealed,vandal-resistant spray heads[ and soap dispenser]. Unit includes waste and supplyconnections to wall with stop, strainer, and check valves[, concealed by ABS plastic accesspanel/trap cover].

1. Spray Heads:?Independent water stream former with flow rate of 0.5 gpm(0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).

2. Spray Head Valve Operation:? Infrared sensing module and solenoid withadjustable turn off delay and automatic shut-off, [with 110/24 VAC plug-intransformer][batteryoperated].

3. Water Supply:?[Temperedline][Thermostaticmixing valve assembly] [Manual mixing valve].

4. Bowl/deck Color:?As selected by Architect from manufacturer's full line.

5. Pedestal enclosure color:? As selected by Architect from manufacturer'sfull line.

6. Basis of Design Manufacturer/Model:? Bradley,Express CrescentLavatory System, CRS‑series.

Specifier: Bradley Express Deck lavatory systemsdescribed below feature a continuous bowl with semi-circular wash stations, aflush deck for accepting individual wash station faucets and optional soapdispensers, and an angled pedestal enclosure concealing frame, supplyconnections, and trap.

E. [Wall-mounted, Floor-supported,] [Wall-mounted,]Accessible, [2] [3] StationLavatory LAV#_:? Constructed of solidsurface material with integral semi-circular continuous bowls and deck, withdeck mounted faucets [and liquid soap dispensers]. Unit includes waste and supplyconnections to wall with stop, strainer, and check valves, and heavy-gagestainless steel support frame, concealed by acrylic laminate pedestal enclosure[andscuff base].

Specifier: Faucetbelow is standard. See Faucet Article in this specification for other Bradleyfaucet options.

1. Faucet:?Low-Profile Faucet with Infrared Sensor Metering Control[, with110/24 VAC plug-in transformer] :? Basisof Design Manufacturer/Model:? Bradley,Aerada 900 Series Futura [specifier insert other faucet selection].

2. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

3. SoapDispenser:? [16 oz. (473 mL)] [32 oz.(946 mL)][stainlesssteel][plastic]globe, with 4 inch (102 mm) spout.

4. Bowl/deck Color:?As selected by Architect from manufacturer's full line.

5. Pedestal Enclosure Color:? As selected by Architect from manufacturer'sfull line.

6. Basis of Design Manufacturer/Model:? Bradley,Express Deck Lavatory System, EXD‑series.

Specifier: Bradley Terreon Lavatory Deck describedbelow features two integral bowls, contoured deck accepting individual wash stationfaucets and optional soap dispensers, and an optional trap cover concealingsupply connections and trap. Deck extensions with or without waste receptaclesare optional. Terreon Lavatory Deck may be supported by wall mount brackets(supplied), or by using in-wall carriers or wall cleats (supplied by others).

F. Wall-mounted, Accessible, 2-Station LavatoryDeck LAV#_:? Constructed of solid surfacematerial with integral oval bowls, contoured front apron, coved backsplash[, andside splashes],with deck mounted faucets[ and liquidsoap dispensers].Unit includes waste and supply connections to wall[, concealed by acrylic laminatetrap cover].

Specifier: Faucetbelow is standard. See Faucet Article in this specification for other Bradleyfaucet options.

1. Configuration:?[2-bowl] [, withextended deck as indicated] [, with 21 gal. (78 L) stainless steel wastereceptacle in extended deck as indicated].

2. Overall Unit Size:? 60 by 24 inches(1524 by 610 mm) with 2 bowls.

3. Bowl Size:? 16 by 13 by 5 3/4 inches (406 by 330 by 145 mm) on 30-inch (762 mm) centers.

4. Faucet:?Low-Profile Faucet with Infrared Sensor Metering Control[, with 110/24 VAC plug-in transformer] :Basis of Design Manufacturer/Model:?Bradley, Aerada 900 Series Futura [specifier insert other faucet selection].

5. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

6. SoapDispenser:? 2:? [16 oz. (473 mL)] [32 oz.(946 mL)][stainlesssteel][plastic]globe, with 4 inch (102 mm) spout.

7. Deck Support:?[Stainlesssteel mounting brackets] [In-wall carriers] [Wall cleats] [Casework specified elsewhere].

8. Deck Color:?As selected by Architect from manufacturer's full line.

9. Bowl Color:?[Matchdeck color][Asselected by Architect from manufacturer's full line].

10. Pedestal Enclosure Color:? As selected by Architect from manufacturer'sfull line.

11. Basis of Design Manufacturer/Model:? Bradley,Terreon Lav Deck, 3060‑series.

Specifier: Bradley Terreon Lavatory Deck describedbelow features integral bowls, deck accepting individual wash station faucetsand optional soap dispensers, and an optional trap cover concealing supplyconnections and trap. Deck extensions with or without waste receptacles areoptional. Terreon Lavatory Deck may be supported by wall mount brackets(supplied), or by using in-wall carriers or wall cleats (supplied by others).

G. Wall-mounted, Accessible, Lavatory DeckLAV#_:? Constructed of solid surfacematerial with integral oval bowls, coved backsplash[, and side splashes], withdeck mounted faucets[ and liquidsoap dispensers].Unit includes waste and supply connections to wall[, concealed by acrylic laminatetrap cover].

1. Configuration:?[1] [2] [3] [4] [5]station deck, [withextended deck as indicated].

2. Bowl Size:? 16 by 13 by 5 3/4 inches (406 by 330 by 145 mm) on 30-inch (762 mm) centers.

Specifier: Faucetbelow is standard. See Faucet Article in this specification for other Bradleyfaucet options.

3. Faucet:?Low-Profile Faucet with Infrared Sensor Metering Control[, with 110/24 VAC plug-in transformer]:? Basis of Design Manufacturer/Model:? Bradley, Aerada 900 Series Futura [specifierinsert other faucet selection].

4. Water Supply:?[Singletempered line][Thermostaticmixing valve assembly].

5. SoapDispenser:? [16 oz. (473 mL)] [32 oz.(946 mL)][stainlesssteel][plastic]globe, with 4 inch (102 mm) spout[, sensor-operated].

6. Deck Support:?[Stainlesssteel mounting brackets] [In-wall carriers] [Wall cleats] [Casework specified elsewhere].

7. Deck Color:?As selected by Architect from manufacturer's full line.

8. Bowl Color:?[Matchdeck color][Asselected by Architect from manufacturer's full line].

9. Pedestal Enclosure Color:? As selected by Architect from manufacturer'sfull line.

10. Basis of Design Manufacturer/Model:? Bradley,Terreon Lav Deck, 3010‑series.

2.5 SINKS, INTEGRAL WITH COUNTERTOPS

Specifier: Bradley Terreon Classroom Sink describedbelow features Terreon deck including one or two integral classroom sink(s),accepting faucets and optional soap dispenser, drinking fountain, and wastereceptacle openings. Terreon Lav Deck is supported by casework supplied byothers. Complies with accessibility requirements when mounted at requiredheight on accessible casework.

A. Casework-Mounted Sink SNK#_:? Constructed of solid surface material withintegral bowl, contoured front apron, coved backsplash[, and side splashes], [, andperimeter drip ledge], with deck mounted faucets[, liquid soap dispensers] [,and waste receptacle openings]. Unit includes waste and supply connections towall[,concealed by acrylic laminate trap cover].

1. Bowl Size:?[16by 21 inch (406 by 533 mm)], [3-1/2 inch (89 mm)] [5-1/2 inch (140 mm)] [8 inch(203 mm)]deep? [Deck less bowl].

2. Bowl Size:?[10by 14 inch (254 by 356 mm)], 8 inch (203 mm) deep.

3. Deck Color:?As selected by Architect from manufacturer's full line.

4. Bowl Color:?[Matchdeck color][Asselected by Architect from manufacturer's full line].

Specifier: Faucetbelow is standard. See Faucet Article in this specification for other Bradleyfaucet options.

5. Faucet:?Gooseneck, 10 inch (254 mm) high, with infrared sensormetering control[,with 110/24 VAC plug-in transformer] [battery operated]:? Basis of Design Manufacturer/Model:? Bradley, Aerada 1000 Series Gooseneck [specifierinsert other faucet selection].

6. Drinking Fountain:? [Lever activated] [Push button activated].

7. SoapDispenser:? 2:? [16 oz. (473 mL)] [32 oz.(946 mL)][stainlesssteel][plastic]globe, with 4 inch (102 mm) spout.

8. Basis of Design Manufacturer/Model:? Bradley,Terreon Classroom Sink.

Specifier: Retainand edit below for sink products when required by project.

2.6 SINKS

A. Kitchen Sinks SNK#_:? [One] [Two] [Three]-bowl, [stainless-steel] [enameled, cast-iron] [porcelain-enameled,formed-steel][solid-surface]residential kitchen sink, counter-mounted, with [disposer fitting] [dishwasherair gap fitting][hotwater dispenser].Size:? 33 by 22 by 8‑1/4 inch(838 by 559 by 209 mm). Color:? [Insert color if required].

1. Faucet:? Kitchensink [Insertfaucet description].

2. Basis of Design Manufacturer/Model:? [Specifier:?insert manufacturer/model for sink and faucet].

B. Service Sinks SNK#_:? [Enameled, cast-iron] [Vitreous china] trap standard service sink,wall-mounting. Size:? 22by 18 inches (560 by 460 mm). Color:? White.

1. Faucet:?Sink [Insertfaucet description].

2. Basis of Design Manufacturer/Model:? [Specifier:?insert manufacturer/model for sink and faucet].

C. Laundry Trays SNK#_:? Plastic, stand-mounted laundry tray.Size:? 25 by 22 inches (635 by 560 mm).

1. Faucet:?Sink, fixture ledge-mounted.

2. Basis of Design Manufacturer/Model:? [Specifier:?insert manufacturer/model for sink and faucet].

2.7 WASHFOUNTAINS

Specifier: Bradley Classic Washfountains describedbelow are designed for efficient, heavy-duty hand washing requirements in institutionaland manufacturing environments. Selected units are available meetingaccessibility and juvenile height requirements.

2500 Series arepreassembled with Terreon solid surface material bowls in semi-circular andcircular configurations, with stainless steel pedestal panels.?

2600 Series consistof precast terrazzo bowls in semi-circular and circular configurations withstainless steel pedestal units.

2700 Series consistof stainless steel bowls in semi-circular and circular configurations withstainless steel pedestal units.

2800 Series arepreassembled with Bradstone reinforced thermoset polyester bowls insemi-circular and circular configurations with ABS tapered pedestal panels.

3100 Series units consistof Terreon solid surface material bowls in circular configurations, withreinforced gel-coated fiberglass pedestal panels and stainless steel kickplate.

3200 Series extraheight units consist of Terreon solid surface material bowls in semi-circularand circular configurations, with reinforced gel-coated fiberglass pedestalpanels and stainless steel kick plate.

Select model andconfiguration, and edit below for options that are available for the series andconfiguration desired. We recommend editing with assistance of Bradleyrepresentative.

A. Floor-supported, [3] [4] [5] [8]-User [Accessible] Washfountain WFN#__:? Bowl constructed of [solid surface material] [reinforcedthermoset polyester] [precast terrazzo] [stainless steel] withsteel legs and [stainlesssteel][ABS] [fiberglass]pedestal panels [inpreassembled unit]. Include spray ring with stainless steel support tube,mixing valve, volume control valve, waste and supply connections with stop,strainer, and check valves. IPC/cUPC-certifed by IAPMO.

1. Bowl:? [Semi-circular] [Circular] [Corner], [36 inch(914 mm)][54 inch(1372 mm)]diameter, [7-1/2 inch(191 mm) deep] [8-1/2 inch (216 mm) deep] [9 inch(229 mm) deep] [, with backsplash].

2. Unit Height:?[28 inch (711 mm)] [29 inch (737 mm)][29-1/4 inch (743 mm)] [29-1/2 inch (749 mm)] [34 inch(864 mm)]

3. Spray Ring:?Non-sectional, with operating range of 20 to 80 psi (138 to552 kPa), flow rate as required by fixture size.

Specifier: Selectone of four spray head valve activation options below.

a. Foot Control Operation:? Operation of foot rail activates hold-openvalve with slow closing upon release of rail.

b. Hand Control Operation:? Operation of pushbutton activates anair-metering valve with field-adjustable timing.

c. Infrared Sensor Operation:? Infrared sensing module and solenoid withadjustable turn off delay and automatic shut-off, with 110/24 VAC plug-intransformer.

d. Electronic Pushbutton/Timer Operation:? Electronic Pushbutton metering valve with110/24 VAC plug-in transformer.

Specifier: Manualmixing valve below is standard with unit.

4. Water Supply:?[Manualmixing valve][Singletempered line][Singleadjustable thermostatic mixing valve].

5. Drain and Supply Configuration:? [Off-line vent with supplies from below] [Centrallyrising vent with supplies from above] [Centrally rising vent with supplies from below] [Off-linevent with supplies from above] [with stainless steel overhead piping shroud].

6. Accessories:

a. Soap Dispenser:?[Powderedsoap][Liquidsoap][,with metal cladding].

b. Paper Towel Dispenser:? Stainless steel, with tie pipe assembly, [single-fold] [c-fold].

c. Tie Pipe Assembly:? Vandal-resistant support tube reinforcement:bracket for accepting 1-1/2 inch diameter pipe.

d. Hose Bibb:?Loose key, threaded, solid brass, with polished chrome finish.

7. Bowl Color:?As selected by Architect from manufacturer's full line.

8. Basis of Design Manufacturer/Model:? Bradley,Classic Washfountain, [2500] [2600] [2700] [2800] [3100] [3200] series.

B. [Wall-Mounted] [Floor-supported],[3] [4] [5] [8]-User [Accessible,]Vandal-Resistant Shallow Bowl Washfountain WFN#__:? Preassembled bowl and pedestal unitconstructed of stainless steel with chrome plated exposed fittings. Includesindividual spray heads per station with stainless steel support tube, mixingvalve, volume control valve, waste and supply connections with stops,strainers, and check valves. Vandal-resistant construction with concealed sprayheads and connections, with support tube integrally welded to bowl.IPC/cUPC-certifed by IAPMO.

1. Bowl:? [Semi-circular] [Circular] [Corner], [36 inch(914 mm)][54 inch(1372 mm)]diameter, [5 inch (127 mm)] deep [, withbacksplash].

2. Unit Height:?[34 inch(864 mm)]

3. Individual Spray Heads:? with operating range of 20 to 80 psi(138 to 552 kPa), flow rate is .5 GPM per station.

Specifier: Selectone of four spray head valve activation options below.

a. Foot Control Operation:? Operation of foot pushbutton activateshold-open valve with slow closing upon release of pushbutton.

b. Hand Control Pushbutton Operation:? Operation of pushbutton activates an airmetering valve with field-adjustable timing.

c. Infrared Sensor Operation:? Infrared sensing module and solenoid withautomatic shut-off, with 110/24 VAC plug-in transformer.

d. Electronic Pushbutton/Timer Operation:? Electronic Pushbutton metering valve, with110/24 VAC plug-in transformer.

Specifier: Manualmixing valve below is standard with unit.

4. Water Supply:?[Singletempered line][Singleadjustable thermostatic mixing valve] [Pressure balance mixing valve].

6. Accessories:

a. Soap Dispenser:?[Liquidsoap].

b. Paper Towel Dispenser:? Stainless steel, with tie pipe assembly, [single‑fold] [c‑fold].

c. Hose Bibb:?Loose key, threaded, solid brass, with polished chrome finish.

7. Basis of Design Manufacturer/Model:? Bradley,Sentry Washfountain, SN2000 series.

Specifier: Bradley Multi-Fount units describedbelow feature a continuous Terreon or terrazzo bowl with a matching spray headshelf. These easily-cleaned, highly vandal-resistant units provide an efficientspace-saving solution for heavy-duty hand washing in commercial and industrialfacilities.

C. [Wall-mounted] [Wall-Mounted and Floor-Supported],Accessible, [2] [3] [4] UserWashfountain WFN#__:? Constructed of [solidsurface material][terrazzo] with integralcontinuous bowl, compact deck, and backsplash ledge containing concealed,vandal-resistant spray head [and liquid soap dispenser]. Unit includes waste and supplyconnections to wall with stop, strainer, and check valves, and steel supportframe, concealed by tamper-resistant stainless steel access panel. ADA/ABA, andANSI A117.1 compliant. IPC/cUPC-certifed by IAPMO.

1. Unit Size:? [36 by 26 inch (914 by660 mm)] [46 by26 inch (1168 by 680 mm)] [26-3/4by 26-3/4 inch (679 by 679 mm) corner unit].

2. Spray Head:?Independent water stream former with flow rate of 0.5 gpm(0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).

Specifier: Selectone of three spray head valve operation options below.

a. Spray Head Valve Operation:? Infrared sensing module and solenoid withadjustable turn off delay and automatic shut-off, ???? with110/24 VAC plug-in transformer

b. Spray Head Valve Operation:? Pushbutton air metering valve withfield-adjustable timing.

c. Spray Head Valve Operation:? Electronic pushbutton metering valve with110/24VAC plug-in transformer.

3. Water Supply:?[Singletempered line][Single adjustable thermostatic mixing valve].

4. Bowl/Spray Head/Pedestal Color:? As selected by Architect from manufacturer'sfull line.

5. Basis of Design Manufacturer/Model:? Bradley,Multi-Fount Washfountain System, MF 2900 series.

D. Wall-Mounted, Accessible, Vandal-Resistant2-User Washfountain WFN#__:? Constructedof stainless steel with compact, crescent-shaped low-profile deck andbacksplash ledge containing concealed, vandal-resistant spray heads.Preassembled unit includes waste and supply connections to wall with stop,strainer, and check valves, concealed by stainless steel access panel/trapcover. IPC/cUPC-certifed by IAPMO.

1. Overall Unit Size:? 27-3/8 by 18-1/2 inches (695 by 470 mm).

2. Spray Head:?Independent water stream former with flow rate of 0.5 gpm(0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).

Specifier: Selectone of three spray head valve operation options below.

a. Spray Head Valve Operation:? Infrared sensing module and solenoid withadjustable turn off delay and automatic shut-off, ???? with110/24 VAC plug-in transformer

b. Spray Head Valve Operation:? Pushbutton air metering valve withfield-adjustable timing.

c. Spray Head Valve Operation:? Electronic pushbutton metering valve with110/24VAC plug-in transformer.

Specifier: Manualmixing valve below is standard with unit.

3. Water Supply:??[Adjustable Thermostatic mixing valveassembly].

4. Basis of Design Manufacturer/Model:? Bradley,Bradmate Washfountain,????????????S93-570 series.

E. Multi-Station, [2] [3] [4] [5]-User Vandal-Resistant Wall SinkWFN#__:? Constructed of 14 ga. Type 304stainless steel with reinforcing channels. Frame constructed of 1-1/2 inch (38mm) stainless steel tubing with adjustable height floor flanges. Preassembledunit includes drain spud and dome grate strainer and 1-1/2 (38 mm) inchdiameter tailpiece.

1. Fixture Size:?[48by 18 inch (1219 by 457 mm)] [62 by 18 inch (1575 by 457 mm)] [80 by18 inch (2032 by 457 mm)] [102 by 18 inch (2591 by 457 mm)].

2. Faucet:? [PushbuttonMetering Faucet. Basis of Design Manufacturer/Model:? Bradley, Model 90-75] [Specifier insert faucet selection].

3. Basis of Design Manufacturer/Model:? Bradley,Multistation Wall Sink.

F. Multi-Station, 8-User Vandal-Resistant IslandSink WFN#__:? Constructed of 14 ga. Type304 stainless steel with reinforcing channels and sound deadening material onunderside. Frame constructed of 1-1/2 inch (38 mm) stainless steel tubing with adjustableheight floor flanges. Column-mounted stainless steel valve manifold housing.Preassembled unit includes drain spud and dome grate strainer and 1-1/2 (38 mm)inch diameter tailpiece.

1. Fixture Size:?[30by 72 inch (762 by 1829 mm)] [40 by 72 inch (1016 by 1829 mm)].

2. Faucet:? [PushbuttonMetering Faucet. Basis of Design Manufacturer/Model:? Bradley, Model 90-75] [Specifier insert faucet selection].

3. Basis of Design Manufacturer/Model:? Bradley,Multistation Island Sink.

2.8 SHOWERS

A. Prefabricated Modular Shower System SH#__: No.304 Stainless steel [wall mounted] [and] [back-to-back] housing concealing piping and controls, withmultiple shower heads and accessories, copper supply piping [withstops]sized for number of shower heads indicated, with end caps, fillers, accesspanels, and stanchions where required, with flow rate of 2.0 - 2.5 gpm(0.128 to 0.160 L/s) at operating range of 20 to 80 psi (138 to552 kPa), and including the following:

1. Valve for Hot/Tempered and Cold Supply:? [Washerless mixing valve] [Pressure balancing valve] [Heavy-dutypressure balancing valve] [Thermostatic mixing valve] [Hot and cold compression valve].

Specifier:? Select water supply type and option for valvetype above or below.

2. Valve for Single Tempered/Cold Supply:? [Infrared metering valve with 24VAC transfomer] [Mechanicalmetering valve][Airmetering valve][Singlecompression valve] [Touch Time? metering valve with 24VAC transfomer].

Specifier: Reviewdetails of accessible module and requirements of authorities havingjurisdiction.

3. Accessible Module:? Equip with diverter valve, backflowpreventer, hand-held shower spray with 60 inch (1524 mm) steel flexible hoseand mounting post, 24 inch (610 mm) grab bar, and molded plastic folding showerseat, 250 lb. (113 kg) capacity.

4. Shower Head:?[Low-flowfixed][Balljoint][Balljoint with volume control] [Severe service].

5. Recessed soap dishes, one per showerhead.

Specifier:? Select above or below.

6. Liquid Soap Dispensers:? Valves with containers recessed in enclosure,one per pair of showerheads.

7. Basis of Design Manufacturer/Model:? Bradley,Panelon Prefabricated Modular Shower System.

B. Wall Showers SW#__:? Preassembled 18 ga. 304 stainless steelhousing with all stainless steel or chrome plated exposed fittings, with [1] [2] [3]shower heads and accessories, cast brass valve bodies, and [flexible stainless steel] [rigid copper]supply inlets. Unit delivers flow rate of 2.0 - 2.5 gpm (0.128 to0.160 L/s) at operating range of 20 to 80 psi (138 to 552 kPa),and including the following:

1. Housing Mounting:? [Surface mounted] [Surface mounted, hinged] [Surfacemounted, corner unit] [Recessed (flush) mounted].

2. Valve for Hot/Tempered and Cold Supply:? [Washerless mixing valve] [Pressure balancing valve] [Heavy-dutypressure balancing valve] [Thermostatic mixing valve] [Hot and cold compression valve].

Specifier:? Select water supply type and option for valvetype above or below.

3. Valve for Single Tempered/Cold Supply:? [Infrared metering valve with 24VAC transfomer] [Mechanicalmetering valve][Airmetering valve][Singlecompression valve] [Touch Time metering valve with 24VAC transfomer].

4. Shower Head:?[Low-flowfixed][Balljoint][Ball-jointwith volume control] [Severe service].

Specifier: Retain belowfor installations requiring handicapped accessible units. Indicate location ondrawings. Review details of accessible module and requirements of authoritieshaving jurisdiction.

5. Accessible Unit:?Equip one station or shower with diverter valve, backflow preventer,hand-held shower spray with 60 inch (1524 mm) steel flexible hose and mountingpost, 24 inch (610 mm) grab bar, and molded plastic folding shower seat,250 lb. (113 kg) capacity.

6. Soap dishes, one per showerhead.

Specifier:? Select above or below.

7. Liquid Soap Dispensers:? Valves with containers recessed in enclosure,one per pair of shower heads.

8. Optional equipment: [vertical] [horizontal]shroud

Specifier:? Select appropriate Bradley product belowbased upon requirements and options above. We recommend editing with assistanceof Bradley representative.

9. Basis of Design Manufacturer/Model:? Bradley,Wall Shower, WS-Series.

C. Column Showers SH#__:? Preassembled 16 ga. 304 stainless steelhousing with all stainless steel or chrome plated brass exposed fittings, withshower heads and accessories, cast brass valve bodies and manifold, coppertubing supply inlets, and cast iron drain fitting. Unit delivers flow rate of2.0 - 2.5 gpm (0.128 to 0.160 L/s) at operating range of 20 to80 psi (138 to 552 kPa), and includes the following:

1. Shower Stations:?[2] [3] [4] [5] [6].

2. Shower Height:?[Standardheight 72 inch (1829 mm)] [Juvenile height 66 inch (1676 mm).

3. Drain and Supply Configuration:? [Off-line vent with supply from below] [Off-linevent with supply from above] [Centrally rising vent with supplies from below] [Centrallyrising vent with supplies from above].

4. Valve for Hot/Tempered and Cold Supply:? [Washerless mixing valve] [Pressure balancing valve] [Heavy-dutypressure balancing valve] [Thermostatic mixing valve] [Hot and cold compression valve].

Specifier:? Select water supply type and option for valvetype above or below.

5. Valve for Single Tempered/Cold Supply:? [Infrared metering valve with 24VAC transfomer] [Mechanicalmetering valve][Airmetering valve][Singlecompression valve] [Touch Time metering valve with 24VAC transfomer].

6. Shower Head:?[Low-flowfixed][Balljoint][Ball-jointwith volume control] [Severe service].

Specifier: Retainbelow for installations requiring handicapped accessible units. Indicatelocation on drawings. Review details of accessible module and requirements ofauthorities having jurisdiction.

7. Accessible Unit:?Equip one station with diverter valve, backflow preventer, hand-heldshower spray with 60 inch (1524 mm) steel flexible hose and mounting post, 24inch (610 mm) grab bar, and molded plastic folding shower seat, 250 lb.(113 kg) capacity.

8. Soap dish, one per showerhead.

Specifier:? Select above or below.

9. Liquid Soap Dispensers:? Valves with containers recessed in enclosure,one per pair of shower heads.

10. Optional Equipment: : Vertical shroud

11. Basis of Design Manufacturer/Model:? Bradley,Column Shower, COL-Series.

Specifier: Itemsbelow may be combined for multiple configurations of individual and groupstalls and compartments. Select required wall or column shower units above.Consult Bradley product literature for common configurations of conventionaland accessible shower compartments.

D. Shower Compartments [, Accessible]:

1. Partitions:?300 stainless steel sheets with No. 4 finish, laminated to honeycombcore with waterproof adhesives, with stirrup brackets.

2. Shower Base Receptor:? [Solid surface material] , with slip-resistant surface andintegral drain, strainer, and outlet.

3. Posts:? 11/4 by 1 1/4 inch (32 mm by 32 mm) by 18 ga. thick stainless steel tube withadjustable floor anchor.

4. Curtain Rail:?300 stainless steel tubing with No. 4 finish, with zinc chromate finish [wirecurtain hooks][rollercurtain hooks][androbe hooks].

5. Curtain:?Herculite vinyl, translucent, with hemmed edges and aluminum grommetreinforced eyelets.

6. Shower Seat:?Folding unit, molded plastic, 250 lb. (113 kg) capacity.

E. Shower Faucet/Mixing Valve:? Single-lever [thermostatic] [pressure-balance] [thermostaticand pressure-balance] [airmetering][Touch Time electronic] [infrared electronic] [hot and cold compression] [single compression] [washerless mixing], commercial solid cast brass with polishedchrome finish, flow rate 2.5-gpm(0.16-L/s) maximum.

1. [Fixed vandal-resistant shower arm][Fixed bent arm]fitting.

2. [Low flow fixed] [Ball joint] [Ball joint w/ volume control] [Severe service] showerhead.

3. [Hand-held fitting with60 inch (1524 mm) flexible hose and hook] [Hand-heldfitting with 60-inch (1524 mm) flexible hose and slide bar].

4. Basis of Design Manufacturer/Model:? Bradley,Model 1C Built-in Shower.

F. Shower Drain:?Corrosion-resistant-metal drain with removable strainer and NPS 2 (DN50) bottom outlet [included with enclosure] [included with base receptor].

2.9 FAUCETS

A. Electronic Lavatory Faucets:

1. Sensor-Operated, Low Profile Metering Faucet with Infrared Control FCT#_:? Vandal-resistant accessible faucet meetingASME A112.18.1/CSA B125. ADA/ANSI A117.1compliant.

a. Body:?Polished chrome plated commercial solid cast brass, with [centershank] [4 inch(102 mm) centerset] [8 inch (203 mm) centerset]mounting [withtrim plate].

b. Aerator:?Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to80 psi (138 to 552 kPa).

c. Water Supply:?[Singletempered line][Manual mixing valve, deck-mounted] [Single thermostatic mixing valve] [Remotethermostatic mixing valve assembly for [4] [8] [12] faucets [with surface-mounted] [with recessed]cabinet].

d. Sensor Module:?Water-conserving, vandal-resistant [adjustable dual sensor unit] [adaptive single sensor unit] withtiming turn-off delay and stationary object automatic timed cutoff.

e. Power Supply:?[Singlefaucet 110VAC/24VDC, 50/60Hz plug-in transformer with anti-theft bracket] [Remotetransformer for [4] [8] [12]faucets][Existingsupply].

f. Basis of Design Manufacturer/Model:? Bradley,Aerada 900 Series Futura.

2. Sensor-Operated, Gooseneck Metering Faucet withInfrared Control FCT#_:? Vandal-resistantaccessible faucet, meetingASME A112.18.1/CSA B125. ADA/ANSI A117.1compliant.

a. Body:? Polishedchrome plated commercial solid forged brass spout base, with [centershank] [4 inch(102 mm) centerset] mounting [with trim plate].

b. Aerator:?Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to80 psi (138 to 552 kPa). Provide installer-optional 1.6 gpm(0.100 L/s) laminar flow insert with plain spray ring and 2.2 gpm(0.139 L/s) aerator insert.

c. Water Supply:?[Singletempered line][Manual mixing valve, deck-mounted] [Single thermostatic mixing valve].

d. Sensor Module:?Water-conserving, vandal-resistant sensor unit with programmable sensorrange, with field-configurable timing turn-off delay and stationary objectautomatic timed cutoff.

e. Power Supply:?[Batteryoperated][Singlefaucet 110VAC/6VDC, 50/60Hz plug-in transformer with anti-theft bracket] [Existingsupply].

f. Basis of Design Manufacturer/Model:? Bradley,Aerada 1000 Series Gooseneck.

3. Sensor-Operated, Low Profile Metering Faucet with Infrared Control FCT#_:? Vandal-resistant accessible faucet meetingASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.

a. Body:?Polished chrome plated commercial solid cast brass, with [centershank] [4 inch(102 mm) centerset mounting with anti-rotation trim plate].

b. Aerator:?Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to80 psi (138 to 552 kPa).

c. Water Supply:?[Singletempered line][Manualmixing valve, deck-mounted] [Single thermostatic mixing valve].

d. Sensor Module:?Water-conserving, vandal-resistant adjustable sensor unit with timing turn-offdelay and stationary object automatic timed cutoff.

e. Power Supply:?Battery-operated single faucet with 100/240VAC plug-in adapter.

f. Basis of Design Manufacturer/Model:? Bradley,Aerada 1100 Series Low Arc.

4. Sensor-Operated, High Profile Metering Faucet with Infrared Control and External TemperatureControl FCT#_:? Vandal-resistantaccessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.

a. Body:?Polished chrome plated commercial solid cast brass, with [centershank] [4 inch(102 mm) centerset mounting with anti-rotation trim plate].

b. Temperature Control:? ADA-compliant lever on faucet body.

c. Aerator:?Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to80 psi (138 to 552 kPa).

d. Sensor Module:?Water-conserving, vandal-resistant adjustable sensor unit with timingturn-off delay and stationary object automatic timed cutoff, with batterydiagnostic light, serviceable from above deck.

e. Power Supply:?Battery-operated single faucet with 6V lithium battery[ andsingle 115VAC plug-in adapter] [ and multiple unit 115VAC plug-in adapter].

f. Basis of Design Manufacturer/Model:? Bradley,Aerada 1100 Series High Arc.

5. Capacitive-Sensor-Operated, Low Profile MeteringFaucet with Infrared Control FCT#_:? Vandal-resistant accessible faucet meetingASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.

a. Body:?Polished chrome plated commercial solid cast brass, with [centershank] [4 inch(102 mm) centerset] [8 inch (203 mm) centerset]mounting [withtrim plate].

b. Aerator:?Laminar Flow rate 0.5 gpm (0.032 L/s) at operating range of 20to 80 psi (138 to 552 kPa).

c. Water Supply:?[Singletempered line][Manual mixing valve, deck-mounted] [Single thermostatic mixing valve].

d. Sensor Module:?Water-conserving, vandal-resistant capacitive-sensing [adjustablesensor unit]with omni-directional sensing zone, timing turn-off delay and stationary objectautomatic timed cutoff.

e. Power Supply: Battery-operated withbelow-deck-mounted battery box [and single faucet 100/120VAC/6VDC plug-inadapter][and6-faucet 100/120VAC/6VDC plug-in adapter].

f. Basis of Design Manufacturer/Model:? Bradley,Aerada 1200 Series CS.

B. Mechanical Lavatory Faucets:

1. Low Profile Metering Faucet with Touch Operation FCT#_:? Vandal-resistant, accessible faucet meetingASME A112.18.1/CSA B125. ADA/ANSI A117.1compliant.

a. Body:?Polished chrome plated commercial solid cast brass, with [centershank] [4 inch(102 mm) centerset] [8 inch (203 mm) centerset mountingwith trim plate].

b. Aerator:?Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to80 psi (138 to 552 kPa).

c. Metering Valve:?Light-touch, 10 second auto shutoff, with replaceable valve cartridge.

d. Water Supply:?[Singletempered line][Manual mixing valve, deck-mounted] [Single thermostatic mixing valve].

e. Basis of Design Manufacturer/Model:? Bradley,Aerada 90-75 Series Metering Faucet.

2. Low Profile, Mixing Faucet with Wrist Blade Operation FCT#_:? Vandal-resistant, accessible faucet meetingASME A112.18.1/CSA B125. ADA/ANSI A117.1compliant.

a. Body:?Polished chrome plated commercial solid cast brass, with 4-inch(102 mm) centerset.

b. Aerator:?Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to80 psi (138 to 552 kPa).

c. Operation:?One-quarter turn, ADA-compliant wrist blade handles.

d. Basis of Design Manufacturer/Model:? Bradley,Aerada 90-80 Series Wristblade Faucet.

2.10 WATER CLOSETS

A. Water Closet WC#_:? Vitreous china, siphon-jet type, [accessible,] [elongated] [roundfront],[floormounted, floor outlet] [floor mounted, back outlet] [wall hung, back outlet] with [gravitytank][flushometertank][one-piecebowl and tank][flushometer], [1 gal./flush (3.8 L/flush)] [1.6 gal./flush (6 L/flush)]design.