BRADLEY VERGE™ NATURAL QUARTZ LAVATORIES
Bradley Corporation, the industry's leading manufacturer of premium quality commercial lavatories, presents Verge natural quartz lavatories. Verge lavatories marry institutional durability with graceful curves and soft radius edges. Bradley's Evero natural quartz material fuses the elegance of quartz with the durability of granite and the luminance of exotic materials, bringing a new sophistication to commercial washroom design. It is the first and only natural quartz material that can be molded into round and curved shapes, in 12 inspired colors. Evero is made from a blend of acrylic modified bio-based polyester resin, natural quartz, granite, and other exotic minerals. It is resistant to chemicals, stains, burns, and impact. Evero is GREENGUARD certified as a low-emitting material.
Verge lavatories may be equipped with a variety of faucets and soap dispensers, including Bradley's graceful Aerada line of water-saving fixtures. Verge lavatories are perfect for commercial lavatories, movie theaters, auditoriums and the executive washroom.
Architects, engineers, and specifiers look to Bradley Corporation for innovation in design and leadership in the development of environmentally conscious products. Bradley Corporation, a member of the U.S. Green Building Council, the Wisconsin Green Building Alliance, has several products earning certification by GREENGUARD Environmental Institute, and GREENGUARD Children and Schools program.
Bradley eases the specifying process with a seasoned customer service staff and a range of helpful information tools on an advanced website. For example, easy-to-use sizing software, available on Bradley's website, allows engineers to quickly determine the correct size Thermostatic Mixing Valves. Bradley is the industry leader in the manufacture of premium quality commercial plumbing fixtures, valves, TMVs and washroom accessories that appear in the following CSI MasterFormat 2004™ Sections:
Section 10 21 13 – Toilet Compartments (Mills Metal, Plastic-laminate, Phenolic, and Plastic units)
Section 10 28 13.13 – Commercial Toilet Accessories
Section 10 28 13.15 – Warm Air Dryers
Section 10 28 13.63 – Detention Toilet Accessories
Section 10 51 26.00 – Plastic Lockers (Lenox Plastic Lockers)
Section 22 11 19 – Domestic Water Piping Specialties (Thermostatic mixing valves)
Section 22 42 16.01 – Commercial Lavatories and Faucets (Single and multi-station lavatory systems)
Section 22 42 16.02 – Commercial Lavatories and Faucets (Bradley Advocate™ Lavatory System)
Section 22 42 16.03 – Commercial Lavatories and Faucets (Bradley Verge™ Lavatory System)
Section 22 42 16.04 – Commercial Lavatory Decks and Faucets (Single and multi-station Omni Decks™)
Section 22 42 16.11 – Commercial Sinks and Faucets
Section 22 42 23 – Commercial Showers and Shower Valves
Section 22 42 33 – Wash Fountains
Section 22 43 00 – Healthcare Plumbing Fixtures (Patient care lavatory units)
Section 22 45 00 – Emergency Plumbing Fixtures (Emergency Eyewash Fixtures and Drench Showers)
Section 22 46 00 – Security Plumbing Fixtures
Contact Bradley Corporation, Menomonee Falls, WI 53051; Phone: 800-BRADLEY ((800)272-3539) Fax: (262)251-5817, or visit the Bradley web site www.bradleycorp.com. Bradley Corporation is an AIA/CES registered provider currently offering five programs earning one (1) HS&W Learning Unit each; several qualify for sustainable design (SD) credit.
Aerix and Lenox are registered trademarks of Bradley Corporation.
Advocate™, Evero™, Verge™, and Omni Deck™ are trademarks of Bradley Corporation.
GreenSpec is a registered trademark of BuildingGreen, LLC
GREENGUARD Certification ProgramSM is a service mark of GREENGUARD Environmental Institute.
SECTION 22 42 16
COMMERCIAL LAVATORIES AND FAUCETS
0.1Engineered stone commercial lavatory units.
Specifier: Edit below to suit Project.
Specifier: Retain paragraphs below that apply to Project.
0.2Division 22 Section "Domestic Water Piping Specialties" for thermostatic mixing valves.
0.3Division 22 Section "Commercial Lavatories and Faucets" for single- and multiple- station lavatory systems.
0.4Division 22 Section "Commercial Lavatories" for commercial lavatory units with modular integrated accessories.
0.5Division 22 Section "Commercial Lavatory Decks and Faucets" for single- and multiple- station lavatory decks.
0.6Division 22 Section "Healthcare Plumbing Fixtures" for healthcare lavatories.
0.7Division 22 Section "Emergency Plumbing Fixtures" for emergency shower and eyewash fixtures.
Specifier: If retaining References Article in Project specification, edit below to correspond to references that remain in Section after editing.
0.8ASSE 1070 - Water Temperature Limiting Devices.
0.9ANSI Z 124.3 - Plastic Lavatories.
0.10ANSI/ICPA SS-1 - Performance Standard for Solid Surface Materials.
0.11ASME A112.18.1 - Plumbing Fixture Fittings.
0.12ASTM C 170 - Standard Test Method for Compressive Strength of Dimension Stone.
0.13ASTM D 570 - Standard Test Method for Water Absorption of Plastics.
0.14ASTM D 785 - Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials.
0.15ASTM D 790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.
0.16ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
0.17CSA B125 - (See ASME A112.18.1 - Plumbing Fixture Fittings).
GREENGUARD Environment Institute is an ANSI Authorized Standards Developer that oversees the GREENGUARD certification program. GEI establishes acceptable indoor air standards for indoor products, environments, and buildings.
0.18GREENGUARD certified low emitting products.
0.19Universal Plumbing Code (cUPC both U.S. and Canada).
0.20ICC/ANSI A117.1 – Accessible and Usable Buildings and Facilities.
0.21NFPA 70 – National Electrical Code.
0.22Texas Accessibility Standards (TAS).
0.23UL 723 - Test For Surface Burning Characteristics of Building Materials.
0.24UL 1951 - Electric Plumbing Accessories.
0.25LEED Green Building Rating System (LEED).
0.26Public Law 102-486 - Energy Policy Act of 1992 (EPACT).
0.27U.S. Architectural & Transportation Barriers Compliance Board. Americans with Disabilities Act (ADA), Accessibility Guidelines for Buildings and Facilities (ADAAG).
Bradley Corporation's TerreonRE recycled solid surface material contains 25-percent preconsumer recycled content and 8-percent rapidly renewable material. LEED WE Credit 2 is for 50 percent reduction in water use for building sewer, based on use of water-conserving fixtures documented under Credit WE 3. LEED WE Credit 3 is for 30, 35, or 40 percent reduction in water usage. Coordinate with Division 01 requirements for LEED MR Credit 5 Regional Materials where applicable.
0.28Product Data for [Credit WE 2] [and] [Credit WE 3]: Documentation indicating compliance with requirements.
0.29Product data, including test data from qualified independent testing agency indicating compliance with requirements.
0.30Samples of each component of product specified.
0.31List of successful installations of similar products available for evaluation by Architect.
0.32Submit substitution request not less than 15 days prior to bid date.
Specifier: Bradley offers handicapped-accessible fixtures meeting requirements of ADA, ICC A117.1, and Texas Accessibility Standards.
0.33GREENGUARD Indoor Air Quality Certified.
0.34GREENGUARD Certified for Children and Schools.
0.35Engineered natural quartz material: 10 years.
0.36Faucets: 1 year.
Specifier: Retain one of three paragraphs below based upon Project requirements. The manufacturer is not aware of comparable manufactured products.
0.37Submit comparable products of one of the following for approval by Architect:
0.38Submit requests for substitution in accordance with Instructions to Bidders and Division 01 General Requirements.
0.39Provide specified product; Owner will not consider substitution requests.
Specifier: Bradley's Verge lavatories are formed from Bradley's unique Evero engineered natural quartz material, noted for its elegant surface appearance and resistance to chemicals, stains, burns and impacts. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.
0.40Basis of Design Product: Bradley, Evero.
0.41Surface Burning Characteristics: Smoke developed, less than 450; flame spread, less than 25, per ASTM E 84.
0.42Flexural Strength: 3267 psi (22.5 MPa), minimum, per ASTM D 790.
0.43Compressive Strength: 11,500 psi (79 MPa), minimum, per ASTM C 170.
0.44Moisture Absorption: 0.065 percent in 24 hours, per ASTM D 570.
0.45Hardness: 6 – 7 Mohs Scale, per ASTM D 785.
0.46Thickness: 1/2 inch.
Specifier: Retain selected Verge lavatory model selected for Project from two models described below.
0.47Basis of Design Manufacturer/Model: Bradley, Verge Lavatory System, Model LVRD.
0.48Number of Wash Stations: [2] [3].
0.49Unit Length: [60 inches (1524 mm)] [90 inches (2286 mm)].
0.50Soap Dispenser: [Included] [None].
0.51Water Supply: [Single tempered line] [Thermostatic mixing valve assembly].
0.52Color: [As selected by Architect from manufacturer's full line].
0.53Rim Mounting Height: [33.5 inch (859 mm)] [31.5 inch (800 mm)] [30.5 inch (775 mm)] [29.5 inch (749 mm)] [As indicated].
0.54Basis of Design Manufacturer/Model: Bradley, Verge Lavatory System, Model LVDG.
0.55Number of Wash Stations: [2] [3].
0.56Unit Length: [60 inches (1524 mm)] [90 inches (2286 mm)].
0.57Soap Dispenser: [Included] [None].
0.58Water Supply: [Single tempered line] [Thermostatic mixing valve assembly].
0.59Color: [As selected by Architect from manufacturer's full line].
0.60Rim Mounting Height: [33.5 inch (859 mm)] [31.5 inch (800 mm)] [30.5 inch (775 mm)] [29.5 inch (749 mm)] [As indicated].
Specifier: Retain descriptions of required faucets; if more than one faucet is required, insert faucet designation in paragraph below and use faucet designation in Lavatory Deck Article above. For Evero faucets, see Specifier Note below.
0.61Basis of Design Manufacturer/Model: Bradley, Aerada 1100 Series High Arc.
0.62Body: Polished chrome plated commercial solid cast brass, with [centershank] [4 inch (102 mm) centerset mounting with anti-rotation trim plate].
0.63Tempered Water Supply: ADA-compliant lever on faucet body.
0.64Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
0.65Sensor Module: Water-conserving, vandal-resistant adjustable sensor unit with timing turn-off delay and stationary object automatic timed cutoff, with battery diagnostic light, serviceable from above deck.
0.66Power Supply: Battery-operated single faucet with 6V lithium battery[ and single 115VAC plug-in adapter] [ and multiple unit 115VAC plug-in adapter].
Specifier: Retain thermostatic mixing valve if required for Project.
0.67Thermostatic Mixing Valve: Thermostatic mixing valve, ASSE 1070 listed, with stop/strainer/check valves, and flexible stainless steel connectors.
0.68Basis of Design Manufacturer/Model: Bradley, Aerada 1200 Series CS.
0.69Body: Polished chrome plated commercial solid cast brass, with [centershank] [4 inch (102 mm) centerset] [8 inch (203 mm) centerset] mounting [with trim plate].
0.70Aerator: Laminar Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
0.71Tempered Water Supply: [Single tempered line] [Manual mixing valve, deck-mounted] [Single thermostatic mixing valve].
0.72Sensor Module: Water-conserving, vandal-resistant capacitive-sensing [adjustable sensor unit] with omni-directional sensing zone, timing turn-off delay and stationary object automatic timed cutoff.
0.73Power Supply: Battery-operated with below-deck-mounted battery box [and single faucet 100/120VAC/6VDC plug-in adapter] [and 6-faucet 100/120VAC/6VDC plug-in adapter].
Specifier: Retain thermostatic mixing valve if required for Project.
0.74Thermostatic Mixing Valve: Thermostatic mixing valve, ASSE 1070 listed, with stop/strainer/check valves, and flexible stainless steel connectors.
Specifier: Three Bradley/Delta faucets listed below are for use with Evero Lav Decks; retain one or more as required.
0.75Basis of Design Manufacturer/Model: Bradley/Delta, Arzo Model 601T050.
0.76Body: Polished chrome plated commercial solid cast brass spout.
0.77Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
0.78Tempered Water Supply: [Single tempered line] [Manual mixing valve, deck-mounted] [Single thermostatic mixing valve].
0.79Sensor Module: Water-conserving, vandal-resistant adjustable sensor unit with timing turn-off delay and stationary object automatic timed cutoff, with battery diagnostic audible signal, remote serviceable.
0.80Power Supply: [120/24 VAC plug-in transformer] [Battery-operated].
Specifier: Retain thermostatic mixing valve if required for Project.
0.81Thermostatic Mixing Valve: Thermostatic mixing valve, ASSE 1070 listed, with stop/strainer/check valves, and flexible stainless steel connectors.
0.82Basis of Design Manufacturer/Model: Bradley/Delta, Grail Model 611T50.
0.83Body: Polished chrome plated commercial solid cast brass spout.
0.84Tempered Water Supply: [Single tempered line] [Manual mixing valve, deck-mounted] [Single thermostatic mixing valve].
0.85Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
0.86Sensor Module: Water-conserving, vandal-resistant adjustable sensor unit with timing turn-off delay and stationary object automatic timed cutoff, with battery diagnostic audible signal, remote serviceable.
0.87Power Supply: [120/24 VAC plug-in transformer] [Battery-operated].
Specifier: Retain thermostatic mixing valve if required for Project.
0.88Thermostatic Mixing Valve: Thermostatic mixing valve, ASSE 1070 listed, with stop/strainer/check valves, and flexible stainless steel connectors.
0.89Basis of Design Manufacturer/Model: Bradley/Delta, Model DEMD-301.
0.90Body: Polished chrome plated commercial solid cast brass spout.
0.91Tempered Water Supply: [Single tempered line] [Manual mixing valve, deck-mounted] [Single thermostatic mixing valve].
0.92Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
0.93Sensor Module: Water-conserving, vandal-resistant adjustable sensor unit with adjustable timing turn-off delay and stationary object automatic timed cutoff, with battery diagnostic signal light, remote serviceable.
0.94Power Supply: Battery-operated single faucet, with six: 1.5V 'AA' cell batteries.
Specifier: Retain thermostatic mixing valve if required for Project.
0.95Thermostatic Mixing Valve: Thermostatic mixing valve, ASSE 1070 listed, with stop/strainer/check valves, and flexible stainless steel connectors.
Specifier: Retain one of two optional soap dispenser paragraphs below and edit as required, or delete if none required.
0.96Basis of Design Manufacturer/Model: Bradley, Model 6315.
0.97Basis of Design Manufacturer/Model: Bradley, Model 6324.
0.98Clean unit surfaces, test fixtures, and leave in ready-to-use condition.
0.99Install new batteries in battery-operated devices.
0.100Fill soap dispensers.
0.101Turn over keys, tools, maintenance instructions, and maintenance stock to Owner.
END OF SECTION