Specifier notes are shown in italics and should be deleted from the final document. Generally all of the manufacturer’s products in this category are listed and the specifier must take care to delete those products not included in the project.
Depending on the relative complexity of the project, the specifier may choose to combine two or more Compartment and Cubicle Sections into one Section, Section 10150 Compartments and Cubicles, corresponding to the CSI MasterFormatä .
Edit each Article in this Section to suit project requirements.
Bradley Plumbing
Fixtures
Bradley is the
industry’s leading manufacturer of premium-quality commercial plumbing fixtures
and washroom accessories. Bradley serves a diverse customer base ranging from
small local facilities to international corporations such as WalMart, General
Motors, U.S. Postal Service, W.W. Grainger, and AMC Theaters Corp. The company
boasts the greatest breadth of commercial plumbing products in the world.
Architects and specifiers look to Bradley for innovative products in categories
such as:
Washfountains Security Plumbing Fixtures
Multi-Station Lavatory Systems Terreon® Solid Surface
Products
Patient Care Lavatory Units Commercial Faucets
Commercial & Group Showers Washroom Accessories
Solid Plastic Locker Systems Washroom Partitions
Emergency Eyewash Fixtures and
Drench Showers
Bradley makes it
easy to specify these products through a seasoned customer service staff and
the best informational tools in the industry. Bradley is proud to be an
AIA CES Registered Provider. For information on Bradley education
programs, click here.
We recommend you consult with your regional Bradley representative, who can be
contacted through: Bradley Corporation,
Bradley is
committed to the continuous improvement of our environmental management system
and performance including resource conservation and pollution prevention. We
are a member of the USGBC and have implemented many internal procedures to
reduce waste and conserve resources in our manufacturing processes as well as
continue to introduce products that support LEED credits.
Bradley products
appear in the following CSI MasterFormat 2004™ Sections:
Section 10 21 13 – Toilet
Compartments
Section 10 51 26 – Plastic
Lockers
Section 10 28 00 – Toilet,
Section 10 28 14 –
Detention Toilet Accessories
Section 22 11 19
– Domestic Water Piping Specialties
Section 22 40 00 – Plumbing
Fixtures
Section 22 43 00 – Healthcare
Plumbing Fixtures
Section 22 45 00 – Emergency
Plumbing Fixtures
Section 22 46 00 – Security
Plumbing Fixtures
Specifier: The
specifier may select CSI MasterFormat 95 or MasterFormat 2004 section numbering
as required.
SECTION 22 40 00 – PLUMBING FIXTURES
SECTION 15400 – PLUMBING FIXTURES
PART 1 - GENERAL
Specifier: Edit paragraphs below to correspond to scope
of project.
1.1 SECTION INCLUDES
A. Lavatories.
B. Sinks.
C. Washfountains.
D. Showers.
E. Faucets.
F. Water closets.
G. Urinals.
Specifier: Edit paragraphs below to correspond to
project. Delete Article if not required.
1.2 RELATED SECTIONS
A. Division 22 Section "Domestic Water Piping Specialties."
B. Division 22 Section "Healthcare Plumbing Fixtures."
A. Division 22 Section "Emergency Plumbing Fixtures."
B. Division 22 Section "Security Plumbing Fixtures."
Specifier: Retain
references below remaining in section following editing. For projects of
limited scope, delete Article.
1.3 REFERENCES
A. American National Standards Institute (ANSI):
1.
ANSI Z
124.3 - Plastic Lavatories.
2. ANSI Z 124.6 - Plastic Sinks.
3. ANSI/ICPA SS-1-2001 - Performance Standard for Solid Surface Materials.
B. American Society of Sanitary Engineering (ASSE):
1. ASSE 1014 - Hand-Held Showers.
2. ASSE 1016 - Individual Thermostatic, Pressure Balancing and Combination Pressure.
C.
ASME
International (ASME):
1. ASME A112.18.1 - Plumbing Fixture Fittings.
2. ASME A112.18.2 - Plumbing Fixture Waste Fittings.
3. ASME A112.18.3M - Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings.
4. ASME A112.19.1M - Enameled Cast Iron Plumbing Fixtures.
5.
ASME A112.19.2M - Vitreous
6. ASME A112.19.4M - Porcelain Enameled Formed Steel Plumbing Fixtures.
D. ASTM International (ASTM):
1. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
2. ASTM D 570 - Standard Test Method for Water Absorption of Plastics.
3. ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.
4. ASTM D 696 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30 degrees C and 30 degrees C With a Vitreous Silica Dilatometer.
5. ASTM D 785 - Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials.
E. Canadian Standards Association (CSA):
1. CSA B125 - (See ASME A112.18.1 - Plumbing Fixture Fittings).
F. International Association of Plumbing and Mechanical Officials (IAPMO):
1. Uniform Plumbing Code (UPC).
G. International Code Council (ICC):
1. ICC/ANSI A117.1 – Accessible and Usable Buildings and Facilities.
H. National Fire Protection Association (NFPA):
1. NFPA 70 - National Electrical Code.
I. NSF International (NSF):
1. NSF 61 - Drinking Water System Components - Health Effects.
J.
State of
1. Texan Accessibility Standards (TAS).
K. Underwriters Laboratories, Inc.
1. UL 723 - Test For Surface Burning Characteristics of Building Materials.
2. UL 1951 - Electric Plumbing Accessories.
L.
1.
M. US Federal Government:
1.
Public Law 90-480 - Architectural Barriers Act. 1968 (
2. Public Law 101-336 - Americans with Disabilities Act. 1990.
3. Public Law 102-486 - Energy Policy Act. 1992.
4.
1.4 SUBMITTALS
A. Product Data: Manufacturer’s data sheets, installation instructions, and maintenance recommendations.
B. Product Test Reports: Indicating compliance of products with requirements, from a qualified independent testing agency, when requested by Architect.
C. Shop Drawings: Prepared by manufacturer. Include rough-in requirements and power, signal, and control wiring diagrams.
D. Operation and Maintenance Data.
Specifier: Retain
applicable paragraphs below for projects intended to be LEED-certified. Verify
credits required.
E. LEED Submittals:
1. Credits WE 3.1/3.2: Provide product data and site inspection reports verifying plumbing fixture water flow performance meets design requirements.
2. Credit ID 1: Provide product data and test results documenting performance of photovoltaic cell-powered sensor-controlled faucet system.
1.5 QUALITY ASSURANCE
A. Manufacturer Qualifications: Approved manufacturer listed in this section, with minimum [5] years experience in the manufacture of plumbing fixtures. Manufacturers seeking approval must submit the following:
1. Product data, including test data from qualified independent testing agency indicating compliance with requirements.
2. Samples of each component of product specified.
3. List of successful installations of similar products available for evaluation by Architect.
4. Submit substitution request not less than 15 days prior to bid date.
B. Source Limitations: Obtain each type of plumbing fixture and compatible accessories through one source from a single approved manufacturer.
Specifier: Bradley
offers handicapped-accessible fixtures meeting requirements of
C. Accessibility Requirements: Comply with requirements of ADA/ABA and with requirements of authorities having jurisdiction.
D. Water Flow and Consumption Requirements: Comply with Public Law 102-486 "Energy Policy Act."
E. Drinking Water Standard: Comply with NSF 61, "Drinking Water System Components – Health Effects," where applicable.
F. Electrical Components: Listed and labeled per NFPA 70, Article 100, by a testing agency acceptable to authorities having jurisdiction.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Deliver, store, and handle components of sound-conditioned practice rooms in accordance with manufacturer’s recommendations. Ship to jobsite only after roughing-in, painting work, and other related finish work has been completed and installation areas are ready to accept units and recommended temperature and humidity levels will be maintained during the remainder of construction.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Basis of Design: Plumbing fixture selections are based upon the manufacturer below. Provide basis of design products[, or comparable product of a listed manufacturer approved by the Architect prior to bid].
1.
Bradley Corporation,
2. [Specifier: Insert comparable manufacturers if required.]
2.2 MATERIALS
Specifier: Below
describes Terreonâ,
Bradley's densified solid surface vandal-resistant material, noted for its
resistance to chemicals, stains, burns and impacts. Surface damage can be easily
repaired with everyday cleansers or fine grit abrasives.
A. Solid Surface Material: Where indicated as constructed of solid surface material, fabricate plumbing fixtures from thermoset acrylic modified polyester resin certified by approved independent testing agency as complying with ANSI/ICPA‑SS-1-2001, ANSI Z124.3, and ANSI Z124.6, with the following minimum properties:
1. Thickness: 1/2 inch (13 mm), minimum.
2. Liquid Absorption: 0.025 percent in 24 hours, per ASTM D 570.
3. Tensile Strength: 5000 psi (34 MPa), minimum, per ASTM D 638.
4. Thermal Expansion: 2.30, per ASTM D 696.
5. Hardness: 55-60, per ASTM D 785.
6. Fire Resistance: Class 1, per ASTM E 84.
7. Basis of Design Product: Bradley, Terreonâ, or a comparable product fabricated from one of the following materials:
a. DuPont™, Corian® Products.
b. Wilsonart® International, Inc., Gibraltar® Products.
2.3 LAVATORIES, SINGLE-STATION
A. Wall-mounted, Accessible, Single-Station Lavatory Fixture LAV#_: Constructed of solid surface material with circular bowl [and soap dispenser]. Unit includes waste and supply connections to wall with stop, strainer, and check valves [, concealed by ABS plastic access panel/trap cover] [, concealed by stainless steel access panel/trap cover].
1. Faucet: Sensor-operated, vandal-resistant low profile faucet, with 110/24 VAC plug-in transformer. Basis of Design Manufacturer/Model: Bradley, Aeradaä 900 Series Futura [specifier insert other faucet selection]
Specifier: Faucet
above is standard. See Faucet Article in this specification for other Bradley
faucet options. Delete above and edit and retain below if spray head option is
required
2. Spray Head: Independent water stream former with flow rate of 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
Specifier: Select
one of three spray head valve operation options below. Select power source
option for infrared sensing module.
a. Spray Head Valve Operation: Infrared sensing module and solenoid with adjustable turn off delay and automatic shut-off, [with 110/24 VAC plug-in transformer] [battery operated].
b. Spray Head Valve Operation: Pushbutton air valve metering with adjustable timing.
c. Spray Head Valve Operation: Light-touch, 10 second auto shutoff.
3. Water Supply: [Single tempered line] [Thermostatic mixing valve assembly].
4. Color: As selected by Architect from manufacturer's full line.
5. Basis of Design Manufacturer/Model: Bradley, Express Model SS-1N.
Specifier: Bradley Frequencyâ
lavatory systems described below feature
a concave or convex shape that creates a contemporary "wave" design
when mounted side by side, the concave unit meeting accessibility requirements
while the convex unit providing ergonomically-correct wash station height for
other adult users. Frequency lavatories come in 26 colors and are equipped with
sensor-controlled faucets, with optional soap dispensers, thermostatic mixing
valves, and point-of-use hot water heaters. Bradley also offers towel
dispensers, mirrors, and waste receptacles with coordinated Frequency design
features – specified in Division 10 Section "Toilet,
B. Wall-mounted, Accessible, Single-Station Lavatory LAV#_: Constructed of solid surface material with [convex] [concave] contoured deck, integral ergonomic bowl, and coved integral backsplash, with sensor faucets, [and liquid soap dispensers]. Unit includes waste and supply connections to wall with stop, strainer, and check valves, and heavy-gage stainless steel support brackets, concealed by textured polystyrene trap enclosure.
1. Overall Unit Size: 30 by 22 inches (762 by 559 mm).
2.
Bowl Size: Rectangular with rounded front: 17 by 13 inches (432 by 330 mm) on 30 inch (762 mm) center.
Bowl Height
(Standard): Overall unit height adjustable to meet juvenile height requirements
and to comply with accessibility requirements of authorities having
jurisdiction. Specifier: Faucet below is standard. See Faucet Article in this
specification for other Bradley faucet options.
3. Faucet: With Infrared Sensor Metering Control[, with 110/24 VAC plug-in transformer] [battery operated]: Basis of Design Manufacturer/Model: Bradley, [Aerada 1100 Series Low Arc] [specifier insert other faucet selection].
4. Liquid Soap Dispenser: Vandal-resistant, deck-mounted infrared-controlled dispenser with removable filler collar: Basis of Design Manufacturer/Model: Bradley, Model No. 6334.
5. Water Supply: [Single tempered line] [Thermostatic mixing valve assembly].
6. Hot Water Heater: Thermostatic electric tankless water heater with micro-processing temperature control providing temperature accuracy of +/- 1 deg. F (0.56 deg. C), flow switch activated, with replacement cartridge element, providing minimum temperature rise of 65 deg. F at 1 gpm (36 deg. C at 3.8 l/m).
a. Basis of Design Manufacturer/Model: Bradley, Model [EX55TMLB, 23A/240VAC] [EX60TMLB, 22A/277VAC].
7. Bowl/deck Color: As selected by Architect from manufacturer's full line.
8. Trap Enclosure Color: As selected by Architect from manufacturer's full line.
9. Basis of Design Manufacturer/Model: Bradley, Frequency Lavatory System.
C. Wall-mounted, Accessible, Single-Station Lavatory Fixture LAV#_: Constructed of solid surface material with water overflow and ledged back, drain, strainer, and tailpiece.
1. Fixture Size: 21 by 18 inch (533 by 457 mm).
2. Faucet: Low-Profile Faucet with Infrared Sensor Metering Control[, with 110/24 VAC plug-in transformer] [battery operated] . Basis of Design Manufacturer/Model: Bradley, Aerada 900 Series Futura [specifier insert other faucet selection].
3. Water Supply: [Single tempered line] [Thermostatic mixing valve assembly].
4. Color: As selected by Architect from manufacturer's full line.
5. Basis of Design Manufacturer/Model: Bradley, Terreon Imperial Lavatory TL-18.
D. Wall-mounted, Single-Station Stainless Steel Food Service Lavatory Fixture LAV#_: Constructed of 300 stainless steel with safety angled corners, 8 inch (203 mm) backsplash, fast-install wall bracket, drain, strainer, and tailpiece.
1. Fixture Size: 18 by 17 3/16 inch (458 by 437 mm).
2. Faucet: Sensor-Operated, Gooseneck Metering Faucet with Infrared Control [, with 120/24 VAC plug-in transformer] [battery operated]. Basis of Design Manufacturer/Model: Bradley, Aerada 1000 Series Gooseneck.
3. Water Supply: [Single tempered line] [Thermostatic mixing valve assembly].
4. Basis of Design Manufacturer/Model: Bradley, Stainless Steel Food Service Lavatory.
Specifier: Retain
and edit below for other types of single-station lavatory products when
required by project.
E. [Wall-mounted] [Wall-and-pedestal-mounted] [, Accessible] Lavatory LAV#_: [Enameled cast-iron, ASME A112.19.1M] [Vitreous china, ASME A112.19.2M]; Size: 20 by 18 inches (508 by 457 mm); Color: White.
1. Basis of Design Manufacturer/Model: [Specifier: insert manufacturer/model].
Specifier: Bradley
multiple-user lavatory systems described below are constructed of Terreon
solid-surface material. The lavatories serve up to 3 users at a time, handling
washroom traffic quickly and economically while providing each user with their
own space. Lavatory bowls are positioned on 30 inch centers. The preassembled
spray head modules are equipped with independent stream formers, each served by
a separate infrared sensor or push-button. Standard flow rate of .5 GPM meets
industry standard for water conservation while providing enough water to rinse
hands quickly and efficiently. Operating range is 20-80 PSI.
Bradley multi-user
lavatory decks are supported by a fully-enclosed stainless steel frame that
houses the lavatory P-trap and tailpiece, flexible stainless steel supply
connections, optional Bradley Vernatherm thermostatic mixing valve with
integral strainers and external checkstops, and optional transformer for
infrared sensor control.
2.4 LAVATORIES, MULTIPLE USER SYSTEMS
Specifier: Bradley Expressâ SS-Series lavatory systems described below feature a Terreon continuous bowl with semi-circular
wash stations. Express SS-Series lavatory systems are now available powered by
Bradley's innovative nditeä sustainable technology – see note below.
Select floor
supported option when wall supported installation is not available.
A. [Wall-mounted, Floor-supported,] [Wall-mounted,] Accessible, [2] [3] Station Lavatory LAV#_: Constructed of solid surface material with integral semi-circular continuous bowls, deck, and ledge containing concealed, vandal-resistant spray head [and liquid soap dispenser]. Unit includes waste and supply connections to wall with stop, strainer, and check valves, and stainless steel support frame, concealed by acrylic laminate pedestal enclosure. ADA/ABA, ANSI A117.1, and TAS compliant. IPC/cUPC-certifed by IAPMO.
1. Overall Unit Size: [50 by 21-1/8 inch (1270 by 537 mm) with 2 bowls] [80 by 21-1/8 inch (2032 by 537 mm) with 3 bowls