Mills Partitions Warranty
The Mills Company warrants to commercial and institutional purchasers only each new partition unit purchased from us to be free from defects in materials and workmanship under normal use and service for a period of one year, upon the following terms and conditions:
This warranty is limited to replacing or repairing, at our option, transportation charges prepaid by the purchaser, any partition unit or part thereof that our inspection shall show to have been defective within the limitations of this warranty.
The period during which partitions units are warranted is as follows, measured from the date of our invoices:
Baked Enamel Partitions - fifteen (15) years against rust-out.
Stainless Steel Partitions - fifteen (15) years against rust-out.
430 type Stainless Steel Partitions - (15) year against rust-out
Bradmar Solid Plastic Partitions - fifteen (15) years
Plastic Laminate Partitions - three (3) years against delamination and discoloration.
Phenolic Partitions - three (3) years against delamination and discoloration.
Fusion Granite Partition Panels and Pilasters - fifteen (15) years
Chrome Plated Zamac Hardware - five (5) years.
Stainless Steel Hardware - lifetime of the partition.
This warranty does not cover installation labor charges and does not apply to any units that have been damaged by accident, abuse, improper installation, improper maintenance, or altered in any way.
The replacement or repair of defective partitions units as stated in this warranty shall constitute the sole remedy of the purchaser and the sole liability of The Mills Company under this warranty.THE MILLS COMPANY SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES CAUSED BY DEFECTS IN PARTITION UNITS OR ANY DELAY IN THE REPAIR OR REPLACEMENT THEREOF.
This warranty extends only to commercial and institutional purchasers and does not extend to any others, including consumer customers of commercial and institutional purchasers.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE.
Revised: March 12, 2004
Sentinel Overhead Braced - Series 400
This style provides the most economical solution for heavy traffic and vandalism prone areas. It requires no special floor or ceiling construction so installation is easy in new construction or remodels. The anti-grip headrail provides outstanding rigidity.
Require no special floor or ceiling construction, installation is easy in new construction or remodels
Most economical solution for heavy traffic and vandalism prone areas
Anti-grip headrail provides outstanding rigidity
Floor Braced - Series 500
The floor braced partition complements design with functional performance. Recommended for restrooms with high ceilings, it enhances the effect of spaciousness.
Ideal for buildings with high ceilings
Enhances the effect of spaciousness
A minimum 3" concrete construction for anchoring is required
Ceiling Hung - Series 600
Ceiling hung partitions are ideal for restrooms with low ceilings. It offers an area free from obstruction to allow for fast and easy maintenance.
Ideal for areas with low ceilings
Offers an area free from obstruction allowing for fast and easy maintenance
Requires structural supports in the ceiling for maximum rigidity
Not recommended for ceiling heights over 8 ft
Floor To Ceiling - Series 700
This style is mounted to the floor and ceiling and is recommended where additional stability is desired.
Mounted to both floor and ceiling
Offers the most stability
Urinal screens to complete a bathroom outfitted with Mills partitions. Available in several styles and various sizes.
Featuring Permaseal design: no moisture penetration, no rust out
Mills exclusive edge design locks facing metal sheets integrally together around the perimeter of the panel.
No moisture penetration. No rust out.
Baked enamel and stainless steel only.